On Thu, 19 Mar 2020 16:48:42 +0100
Mike Looijmans <mike.looijmans@xxxxxxxx> wrote:
> The BMI088 is a combined module with both accelerometer and gyroscope.
> This adds the accelerometer driver support for the SPI interface.
> The gyroscope part is already supported by the BMG160 driver.
>
> Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
Hi Mike,
Please don't post each version as a reply to the previous version.
It can nest very deeply and get very confusing.
New thread for each version. We can use the naming to find the
previous ones if needed.
I don't have much to add to what Andy found. However,
please make sure you are consistent on checking return values
form spi accesses. There are a few random ones in here
that just get ignored.
That's kind of find in remove paths etc as no way of really reporting
the error, but there are a few normal paths in here as well.
Looks pretty good.
Jonathan
> ---
> v2: Remove unused typedefs and variables
> Fix error return when iio_device_register fails
> v3: Processed comments from Jonathan Cameron and Lars-Peter Clausen
> implement runtime PM (tested by code tracing) and sleep
> fix scale and offset factors for accel and temperature and
> return raw values instead of pre-scaled ones
> Use iio_device_{claim,release}_direct_mode
> Remove unused code and structs
> Use a cache-aligned buffer for bulk read
> Configure and enable caching register values
>
> drivers/iio/accel/Kconfig | 17 +
> drivers/iio/accel/Makefile | 2 +
> drivers/iio/accel/bmi088-accel-core.c | 671 ++++++++++++++++++++++++++
> drivers/iio/accel/bmi088-accel-spi.c | 85 ++++
> drivers/iio/accel/bmi088-accel.h | 12 +
> 5 files changed, 787 insertions(+)
> create mode 100644 drivers/iio/accel/bmi088-accel-core.c
> create mode 100644 drivers/iio/accel/bmi088-accel-spi.c
> create mode 100644 drivers/iio/accel/bmi088-accel.h
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 5d91a6dda894..7ed9c82b731b 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -151,6 +151,23 @@ config BMC150_ACCEL_SPI
> tristate
> select REGMAP_SPI
>
> +config BMI088_ACCEL
> + tristate "Bosch BMI088 Accelerometer Driver"
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> + select REGMAP
> + select BMI088_ACCEL_SPI
> + help
> + Say yes here to build support for the Bosch BMI088 accelerometer.
> +
> + This is a combo module with both accelerometer and gyroscope.
> + This driver is only implementing accelerometer part, which has
> + its own address and register map.
> +
> +config BMI088_ACCEL_SPI
> + tristate
> + select REGMAP_SPI
> +
> config DA280
> tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver"
> depends on I2C
> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> index 3a051cf37f40..f44613103ae5 100644
> --- a/drivers/iio/accel/Makefile
> +++ b/drivers/iio/accel/Makefile
> @@ -19,6 +19,8 @@ obj-$(CONFIG_BMA400_I2C) += bma400_i2c.o
> obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
> obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
> obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
> +obj-$(CONFIG_BMI088_ACCEL) += bmi088-accel-core.o
> +obj-$(CONFIG_BMI088_ACCEL_SPI) += bmi088-accel-spi.o
> obj-$(CONFIG_DA280) += da280.o
> obj-$(CONFIG_DA311) += da311.o
> obj-$(CONFIG_DMARD06) += dmard06.o
> diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c
> new file mode 100644
> index 000000000000..b1e496f1389d
> --- /dev/null
> +++ b/drivers/iio/accel/bmi088-accel-core.c
> @@ -0,0 +1,671 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * 3-axis accelerometer driver supporting following Bosch-Sensortec chips:
> + * - BMI088
> + *
> + * Copyright (c) 2018-2020, Topic Embedded Products
> + */
> +
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/acpi.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/events.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/regmap.h>
> +#include <asm/unaligned.h>
> +
> +#include "bmi088-accel.h"
> +
> +#define BMI088_ACCEL_DRV_NAME "bmi088_accel"
> +#define BMI088_ACCEL_IRQ_NAME "bmi088_accel_event"
> +
> +#define BMI088_ACCEL_REG_CHIP_ID 0x00
> +#define BMI088_ACCEL_REG_ERROR 0x02
> +
> +#define BMI088_ACCEL_REG_INT_STATUS 0x1D
> +#define BMI088_ACCEL_INT_STATUS_BIT_DRDY BIT(7)
> +
> +#define BMI088_ACCEL_REG_RESET 0x7E
> +#define BMI088_ACCEL_RESET_VAL 0xB6
> +
> +#define BMI088_ACCEL_REG_PWR_CTRL 0x7D
> +#define BMI088_ACCEL_REG_PWR_CONF 0x7C
> +
> +#define BMI088_ACCEL_REG_INT_MAP_DATA 0x58
> +#define BMI088_ACCEL_INT_MAP_DATA_BIT_INT1_DRDY BIT(2)
> +#define BMI088_ACCEL_INT_MAP_DATA_BIT_INT2_FWM BIT(5)
> +
> +#define BMI088_ACCEL_REG_INT1_IO_CONF 0x53
> +#define BMI088_ACCEL_INT1_IO_CONF_BIT_ENABLE_OUT BIT(3)
> +#define BMI088_ACCEL_INT1_IO_CONF_BIT_LVL BIT(1)
> +
> +#define BMI088_ACCEL_REG_INT2_IO_CONF 0x54
> +#define BMI088_ACCEL_INT2_IO_CONF_BIT_ENABLE_OUT BIT(3)
> +#define BMI088_ACCEL_INT2_IO_CONF_BIT_LVL BIT(1)
> +
> +#define BMI088_ACCEL_REG_ACC_CONF 0x40
> +#define BMI088_ACCEL_REG_ACC_RANGE 0x41
> +#define BMI088_ACCEL_RANGE_3G 0x00
> +#define BMI088_ACCEL_RANGE_6G 0x01
> +#define BMI088_ACCEL_RANGE_12G 0x02
> +#define BMI088_ACCEL_RANGE_24G 0x03
> +
> +#define BMI088_ACCEL_REG_TEMP 0x22
> +#define BMI088_ACCEL_TEMP_UNIT 125
> +#define BMI088_ACCEL_TEMP_OFFSET 23000
> +
> +#define BMI088_ACCEL_REG_XOUT_L 0x12
> +#define BMI088_ACCEL_AXIS_TO_REG(axis) \
> + (BMI088_ACCEL_REG_XOUT_L + (axis * 2))
> +
> +#define BMI088_ACCEL_MAX_STARTUP_TIME_MS 1
> +#define BMI088_AUTO_SUSPEND_DELAY_MS 2000
> +
> +#define BMI088_ACCEL_REG_FIFO_STATUS 0x0E
> +#define BMI088_ACCEL_REG_FIFO_CONFIG0 0x48
> +#define BMI088_ACCEL_REG_FIFO_CONFIG1 0x49
> +#define BMI088_ACCEL_REG_FIFO_DATA 0x3F
> +#define BMI088_ACCEL_FIFO_LENGTH 100
> +
> +#define BMI088_ACCEL_FIFO_MODE_FIFO 0x40
> +#define BMI088_ACCEL_FIFO_MODE_STREAM 0x80
> +
> +enum bmi088_accel_axis {
> + AXIS_X,
> + AXIS_Y,
> + AXIS_Z,
> + AXIS_MAX,
> +};
> +
> +enum bmi088_power_modes {
> + BMI088_ACCEL_MODE_ACTIVE,
> + BMI088_ACCEL_MODE_SUSPEND,
> +};
> +
> +/* Available OSR (over sampling rate) sets the 3dB cut-off frequency */
> +enum bmi088_osr_modes {
> + BMI088_ACCEL_MODE_OSR_NORMAL = 0xA,
> + BMI088_ACCEL_MODE_OSR_2 = 0x9,
> + BMI088_ACCEL_MODE_OSR_4 = 0x8,
> +};
> +
> +/* Available ODR (output data rates) in Hz */
> +enum bmi088_odr_modes {
> + BMI088_ACCEL_MODE_ODR_12_5 = 0x5,
> + BMI088_ACCEL_MODE_ODR_25 = 0x6,
> + BMI088_ACCEL_MODE_ODR_50 = 0x7,
> + BMI088_ACCEL_MODE_ODR_100 = 0x8,
> + BMI088_ACCEL_MODE_ODR_200 = 0x9,
> + BMI088_ACCEL_MODE_ODR_400 = 0xa,
> + BMI088_ACCEL_MODE_ODR_800 = 0xb,
> + BMI088_ACCEL_MODE_ODR_1600 = 0xc,
> +};
> +
> +struct bmi088_scale_info {
> + int scale;
> + u8 reg_range;
> +};
> +
> +struct bmi088_accel_chip_info {
> + const char *name;
> + u8 chip_id;
> + const struct iio_chan_spec *channels;
> + int num_channels;
> +};
> +
> +struct bmi088_accel_data {
> + struct regmap *regmap;
> + struct mutex mutex;
> + const struct bmi088_accel_chip_info *chip_info;
> + u8 buffer[2] ____cacheline_aligned;
> +};
> +
> +static const struct regmap_range bmi088_volatile_ranges[] = {
> + /* All registers below 0x40 are volatile, except the CHIP ID. */
> + regmap_reg_range(BMI088_ACCEL_REG_ERROR, 0x3f),
> + /* Mark the RESET as volatile too, it is self-clearing */
> + regmap_reg_range(BMI088_ACCEL_REG_RESET, BMI088_ACCEL_REG_RESET),
> +};
> +
> +static const struct regmap_access_table bmi088_volatile_table = {
> + .yes_ranges = bmi088_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(bmi088_volatile_ranges),
> +};
> +
> +const struct regmap_config bmi088_regmap_conf = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x7E,
> + .volatile_table = &bmi088_volatile_table,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +EXPORT_SYMBOL_GPL(bmi088_regmap_conf);
> +
> +
> +#ifdef CONFIG_PM
> +static int bmi088_accel_set_power_state(struct bmi088_accel_data *data,
> + bool on)
> +{
> + struct device *dev = regmap_get_device(data->regmap);
> + int ret;
> +
> + if (on) {
> + ret = pm_runtime_get_sync(dev);
> + } else {
> + pm_runtime_mark_last_busy(dev);
> + ret = pm_runtime_put_autosuspend(dev);
> + }
> +
> + if (ret < 0) {
> + dev_err(dev, "Failed: %s(%d)\n", __func__, on);
> + if (on)
> + pm_runtime_put_noidle(dev);
> +
> + return ret;
> + }
> +
> + return 0;
> +}
> +#else
> +static int bmi088_accel_set_power_state(struct bmi088_accel_data *data,
> + bool on)
> +{
> + return 0;
> +}
> +#endif
> +
> +static int bmi088_accel_enable(struct bmi088_accel_data *data,
> + bool on_off)
> +{
> + struct device *dev = regmap_get_device(data->regmap);
> + int ret;
> +
> + ret = regmap_write(data->regmap, BMI088_ACCEL_REG_PWR_CTRL,
> + on_off ? 0x4 : 0x0);
> + if (ret < 0) {
> + dev_err(dev, "Error writing ACC_PWR_CTRL reg\n");
> + return ret;
> + }
> + /* Datasheet recommends to wait at least 5ms before communication */
> + usleep_range(5000, 6000);
> +
> + return 0;
> +}
> +
> +/* In suspend mode, only the accelerometer is powered down. */
> +static int bmi088_accel_set_mode(struct bmi088_accel_data *data,
> + enum bmi088_power_modes mode)
> +{
> + struct device *dev = regmap_get_device(data->regmap);
> + int ret;
> +
> + ret = regmap_write(data->regmap, BMI088_ACCEL_REG_PWR_CONF,
> + mode == BMI088_ACCEL_MODE_SUSPEND ? 0x3 : 0x0);
> + if (ret < 0) {
> + dev_err(dev, "Error writing ACCEL_PWR_CONF reg\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int bmi088_accel_set_bw(struct bmi088_accel_data *data,
> + enum bmi088_odr_modes odr_mode,
> + enum bmi088_osr_modes osr_mode)
> +{
> + struct device *dev = regmap_get_device(data->regmap);
> + int ret;
> + u8 value = (osr_mode << 4) | (odr_mode & 0xF);
> +
> + ret = regmap_write(data->regmap, BMI088_ACCEL_REG_ACC_CONF, value);
> + if (ret < 0) {
> + dev_err(dev, "Error writing ACCEL_PWR_CONF reg\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int bmi088_accel_get_sample_freq(struct bmi088_accel_data *data,
> + int* val, int *val2)
> +{
> + unsigned int value;
> + int ret;
> +
> + ret = regmap_read(data->regmap, BMI088_ACCEL_REG_ACC_CONF,
> + &value);
> + if (ret < 0)
> + return ret;
> +
> + value &= 0xf; /* ODR in lower 4 bits */
> + if (value == BMI088_ACCEL_MODE_ODR_12_5) {
> + *val = 12;
> + *val2 = 500000;
> + ret = IIO_VAL_INT_PLUS_MICRO;
> + } else {
> + *val = 25 << (value - BMI088_ACCEL_MODE_ODR_25);
> + *val2 = 0;
> + ret = IIO_VAL_INT;
> + }
> +
> + return ret;
> +}
> +
> +static int bmi088_accel_set_sample_freq(struct bmi088_accel_data *data, int val)
> +{
> + unsigned int value = BMI088_ACCEL_MODE_ODR_1600;
> + unsigned int freq = 1600;
> + int ret;
> +
> + if (val < 12 || val > 1600)
> + return -EINVAL;
> +
> + while (freq > val && value > BMI088_ACCEL_MODE_ODR_12_5) {
> + --value;
> + freq >>= 1;
> + }
> +
> + ret = regmap_update_bits(data->regmap, BMI088_ACCEL_REG_ACC_CONF,
> + 0x0f, value);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int bmi088_accel_get_temp(struct bmi088_accel_data *data, int *val)
> +{
> + int ret;
> + __s16 temp;
> +
> + mutex_lock(&data->mutex);
> +
> + ret = regmap_bulk_read(data->regmap, BMI088_ACCEL_REG_TEMP,
> + &data->buffer, 2);
> + temp = get_unaligned_be16(data->buffer);
> +
> + mutex_unlock(&data->mutex);
> +
> + if (ret < 0)
> + return ret;
> +
> + *val = temp >> 5;
> +
> + return IIO_VAL_INT;
> +}
> +
> +static int bmi088_accel_get_axis(struct bmi088_accel_data *data,
> + struct iio_chan_spec const *chan,
> + int *val)
> +{
> + int ret;
> + __s16 raw_val;
> +
> + mutex_lock(&data->mutex);
> +
> + ret = bmi088_accel_set_power_state(data, true);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_bulk_read(data->regmap,
> + BMI088_ACCEL_AXIS_TO_REG(chan->scan_index),
> + data->buffer, 2);
> + raw_val = get_unaligned_le16(data->buffer);
> +
> + bmi088_accel_set_power_state(data, false);
> +
> + mutex_unlock(&data->mutex);
> +
> + if (ret < 0)
> + return ret;
> +
> + *val = raw_val;
> +
> + return IIO_VAL_INT;
> +}
> +
> +static int bmi088_accel_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct bmi088_accel_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + switch (chan->type) {
> + case IIO_TEMP:
> + return bmi088_accel_get_temp(data, val);
> + case IIO_ACCEL:
> + ret = iio_device_claim_direct_mode(indio_dev);
> + if (ret < 0)
> + return ret;
> +
> + ret = bmi088_accel_get_axis(data, chan, val);
> + iio_device_release_direct_mode(indio_dev);
> + if (ret < 0)
> + return ret;
> +
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> + case IIO_CHAN_INFO_OFFSET:
> + switch (chan->type) {
> + case IIO_TEMP:
> + /* Offset applies before scale */
> + *val = BMI088_ACCEL_TEMP_OFFSET/BMI088_ACCEL_TEMP_UNIT;
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> + case IIO_CHAN_INFO_SCALE:
> + *val = 0;
> + switch (chan->type) {
> + case IIO_TEMP:
> + /* 0.125 degrees per LSB */
> + *val = BMI088_ACCEL_TEMP_UNIT;
> + return IIO_VAL_INT;
> + case IIO_ACCEL:
> + {
> + ret = regmap_read(data->regmap,
> + BMI088_ACCEL_REG_ACC_RANGE, val);
> + if (ret < 0)
> + return ret;
> +
> + *val2 = 15 - (*val & 0x3);
> + *val = 3 * 980;
> +
> + return IIO_VAL_FRACTIONAL_LOG2;
> + }
> + default:
> + return -EINVAL;
> + }
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + mutex_lock(&data->mutex);
> + ret = bmi088_accel_get_sample_freq(data, val, val2);
> + mutex_unlock(&data->mutex);
> + return ret;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int bmi088_accel_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct bmi088_accel_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + mutex_lock(&data->mutex);
> + ret = bmi088_accel_set_sample_freq(data, val);
> + mutex_unlock(&data->mutex);
> + break;
> + default:
> + ret = -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("12.5 25 50 100 200 400 800 1600");
> +
> +static struct attribute *bmi088_accel_attributes[] = {
> + &iio_const_attr_sampling_frequency_available.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group bmi088_accel_attrs_group = {
> + .attrs = bmi088_accel_attributes,
> +};
> +
> +#define BMI088_ACCEL_CHANNEL(_axis) { \
> + .type = IIO_ACCEL, \
> + .modified = 1, \
> + .channel2 = IIO_MOD_##_axis, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ), \
> + .scan_index = AXIS_##_axis, \
> +}
> +
> +static const struct iio_chan_spec bmi088_accel_channels[] = {
> + {
> + .type = IIO_TEMP,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_SCALE) |
> + BIT(IIO_CHAN_INFO_OFFSET),
> + .scan_index = -1,
> + },
> + BMI088_ACCEL_CHANNEL(X),
> + BMI088_ACCEL_CHANNEL(Y),
> + BMI088_ACCEL_CHANNEL(Z),
> + IIO_CHAN_SOFT_TIMESTAMP(3),
> +};
> +
> +static const struct bmi088_accel_chip_info bmi088_accel_chip_info_tbl[] = {
> + [0] = {
> + .name = "bmi088a",
> + .chip_id = 0x1E,
> + .channels = bmi088_accel_channels,
> + .num_channels = ARRAY_SIZE(bmi088_accel_channels),
> + },
> +};
> +
> +static const struct iio_info bmi088_accel_info = {
> + .attrs = &bmi088_accel_attrs_group,
> + .read_raw = bmi088_accel_read_raw,
> + .write_raw = bmi088_accel_write_raw,
> +};
> +
> +static const unsigned long bmi088_accel_scan_masks[] = {
> + BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z),
> + 0};
> +
> +
> +static int bmi088_accel_chip_init(struct bmi088_accel_data *data)
> +{
> + struct device *dev = regmap_get_device(data->regmap);
> + int ret, i;
> + unsigned int val;
> +
> + /* Do a dummy read to enable SPI interface, won't harm I2C */
> + regmap_read(data->regmap, BMI088_ACCEL_REG_INT_STATUS, &val);
> +
> + /*
> + * Reset chip to get it in a known good state. A delay of 1ms after
> + * reset is required according to the data sheet
> + */
> + regmap_write(data->regmap, BMI088_ACCEL_REG_RESET,
> + BMI088_ACCEL_RESET_VAL);
Be consistent on error checking. They should all be checked unless there is
no way of reporting the error onwards.
> + usleep_range(1000, 2000);
> +
> + /* Do a dummy read again after a reset to enable the SPI interface */
> + regmap_read(data->regmap, BMI088_ACCEL_REG_INT_STATUS, &val);
> +
> + /* Read chip ID */
> + ret = regmap_read(data->regmap, BMI088_ACCEL_REG_CHIP_ID, &val);
> + if (ret < 0) {
> + dev_err(dev, "Error: Reading chip id\n");
> + return ret;
> + }
> +
> + /* Validate chip ID */
> + for (i = 0; i < ARRAY_SIZE(bmi088_accel_chip_info_tbl); i++) {
> + if (bmi088_accel_chip_info_tbl[i].chip_id == val) {
> + data->chip_info = &bmi088_accel_chip_info_tbl[i];
> + break;
> + }
> + }
> +
> + if (!data->chip_info) {
> + dev_err(dev, "Invalid chip %x\n", val);
> + return -ENODEV;
> + }
> +
> + /* Enable accelerometer after reset */
> + ret = bmi088_accel_enable(data, true);
> + if (ret < 0)
> + return ret;
> +
> + /* Set sampling frequency and bandwidth defaults */
> + ret = bmi088_accel_set_bw(data, BMI088_ACCEL_MODE_ODR_25,
> + BMI088_ACCEL_MODE_OSR_NORMAL);
> + if (ret < 0)
> + return ret;
> +
> + /* Set Default Range */
> + ret = regmap_write(data->regmap, BMI088_ACCEL_REG_ACC_RANGE,
> + BMI088_ACCEL_RANGE_6G);
> + if (ret < 0)
> + return ret;
> +
> + return 0;
Andy pointed this out, but regmap_read / write always uses negative or
zero. Cleaning the checks up to be if (ret) is neater and
lets you just do
return regmap_write(...)
for the last call here.
> +}
> +
> +int bmi088_accel_core_probe(struct device *dev, struct regmap *regmap,
> + int irq, const char *name, bool block_supported)
> +{
> + struct bmi088_accel_data *data;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + dev_set_drvdata(dev, indio_dev);
> +
> + data->regmap = regmap;
> +
> + ret = bmi088_accel_chip_init(data);
> + if (ret < 0)
> + return ret;
> +
> + mutex_init(&data->mutex);
> +
> + indio_dev->dev.parent = dev;
> + indio_dev->channels = data->chip_info->channels;
> + indio_dev->num_channels = data->chip_info->num_channels;
> + indio_dev->name = name ? name : data->chip_info->name;
> + indio_dev->available_scan_masks = bmi088_accel_scan_masks;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->info = &bmi088_accel_info;
> +
> + ret = pm_runtime_set_active(dev);
> + if (ret)
> + return ret;
> +
> + pm_runtime_enable(dev);
> + pm_runtime_set_autosuspend_delay(dev, BMI088_AUTO_SUSPEND_DELAY_MS);
> + pm_runtime_use_autosuspend(dev);
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0) {
> + dev_err(dev, "Unable to register iio device\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(bmi088_accel_core_probe);
> +
> +int bmi088_accel_core_remove(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct bmi088_accel_data *data = iio_priv(indio_dev);
> +
> + iio_device_unregister(indio_dev);
> +
> + pm_runtime_disable(dev);
> + pm_runtime_set_suspended(dev);
> + pm_runtime_put_noidle(dev);
> +
> + mutex_lock(&data->mutex);
> + bmi088_accel_set_mode(data, BMI088_ACCEL_MODE_SUSPEND);
> + mutex_unlock(&data->mutex);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(bmi088_accel_core_remove);
> +
> +/* When going into system sleep, put the chip in power down */
> +static int __maybe_unused bmi088_accel_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct bmi088_accel_data *data = iio_priv(indio_dev);
> +
> + mutex_lock(&data->mutex);
> + bmi088_accel_set_mode(data, BMI088_ACCEL_MODE_SUSPEND);
> + bmi088_accel_set_power_state(data, false);
> + mutex_unlock(&data->mutex);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused bmi088_accel_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct bmi088_accel_data *data = iio_priv(indio_dev);
> +
> + mutex_lock(&data->mutex);
> + bmi088_accel_set_power_state(data, true);
> + bmi088_accel_set_mode(data, BMI088_ACCEL_MODE_ACTIVE);
> + mutex_unlock(&data->mutex);
> +
> + return 0;
> +}
> +
> +/* For runtime PM put the chip in suspend mode */
> +static int __maybe_unused bmi088_accel_runtime_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct bmi088_accel_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + ret = bmi088_accel_set_mode(data, BMI088_ACCEL_MODE_SUSPEND);
> + if (ret < 0)
> + return -EAGAIN;
> +
> + return 0;
> +}
> +
> +static int __maybe_unused bmi088_accel_runtime_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct bmi088_accel_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + ret = bmi088_accel_set_mode(data, BMI088_ACCEL_MODE_ACTIVE);
> + if (ret < 0)
> + return ret;
> +
> + usleep_range(BMI088_ACCEL_MAX_STARTUP_TIME_MS * 1000,
> + BMI088_ACCEL_MAX_STARTUP_TIME_MS * 1000 * 2);
> +
> + return 0;
> +}
> +
> +const struct dev_pm_ops bmi088_accel_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(bmi088_accel_suspend, bmi088_accel_resume)
> + SET_RUNTIME_PM_OPS(bmi088_accel_runtime_suspend,
> + bmi088_accel_runtime_resume, NULL)
> +};
> +EXPORT_SYMBOL_GPL(bmi088_accel_pm_ops);
> +
> +MODULE_AUTHOR("Niek van Agt <niek.van.agt@xxxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("BMI088 accelerometer driver (core)");
> diff --git a/drivers/iio/accel/bmi088-accel-spi.c b/drivers/iio/accel/bmi088-accel-spi.c
> new file mode 100644
> index 000000000000..4116122cbac0
> --- /dev/null
> +++ b/drivers/iio/accel/bmi088-accel-spi.c
> @@ -0,0 +1,85 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * 3-axis accelerometer driver supporting following Bosch-Sensortec chips:
> + * - BMI088
> + *
> + * Copyright (c) 2018-2020, Topic Embedded Products
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/spi/spi.h>
> +#include <linux/regmap.h>
> +
> +#include "bmi088-accel.h"
> +
> +int bmi088_regmap_spi_write(void *context, const void *data, size_t count)
> +{
> + struct spi_device *spi = context;
> +
> + /* Write register is same as generic SPI */
> + return spi_write(spi, data, count);
> +}
> +
> +int bmi088_regmap_spi_read(void *context, const void *reg,
> + size_t reg_size, void *val, size_t val_size)
> +{
> + struct spi_device *spi = context;
> + u8 addr[2];
> +
> + addr[0] = *(u8 *)reg;
> + addr[0] |= 0x80; /* bit7 = RW = '1' */
> + addr[1] = 0; /* Read requires a dummy byte transfer */
> +
> + return spi_write_then_read(spi, addr, sizeof(addr), val, val_size);
> +}
> +
> +static struct regmap_bus bmi088_regmap_bus = {
> + .write = bmi088_regmap_spi_write,
> + .read = bmi088_regmap_spi_read,
> + .reg_format_endian_default = REGMAP_ENDIAN_BIG,
> + .val_format_endian_default = REGMAP_ENDIAN_BIG,
> +};
> +
> +static int bmi088_accel_probe(struct spi_device *spi)
> +{
> + struct regmap *regmap;
> + const struct spi_device_id *id = spi_get_device_id(spi);
> +
> + regmap = devm_regmap_init(&spi->dev, &bmi088_regmap_bus,
> + spi, &bmi088_regmap_conf);
> +
> + if (IS_ERR(regmap)) {
> + dev_err(&spi->dev, "Failed to initialize spi regmap\n");
> + return PTR_ERR(regmap);
> + }
> +
> + return bmi088_accel_core_probe(&spi->dev, regmap, spi->irq, id->name,
> + true);
> +}
> +
> +static int bmi088_accel_remove(struct spi_device *spi)
> +{
> + return bmi088_accel_core_remove(&spi->dev);
> +}
> +
> +static const struct spi_device_id bmi088_accel_id[] = {
> + {"bmi088_accel", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(spi, bmi088_accel_id);
> +
> +static struct spi_driver bmi088_accel_driver = {
> + .driver = {
> + .name = "bmi088_accel_spi",
> + .pm = &bmi088_accel_pm_ops,
> + },
> + .probe = bmi088_accel_probe,
> + .remove = bmi088_accel_remove,
> + .id_table = bmi088_accel_id,
> +};
> +module_spi_driver(bmi088_accel_driver);
> +
> +MODULE_AUTHOR("Niek van Agt <niek.van.agt@xxxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("BMI088 accelerometer driver (SPI)");
> diff --git a/drivers/iio/accel/bmi088-accel.h b/drivers/iio/accel/bmi088-accel.h
> new file mode 100644
> index 000000000000..fce6427bb7b8
> --- /dev/null
> +++ b/drivers/iio/accel/bmi088-accel.h
> @@ -0,0 +1,12 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef BMI088_ACCEL_H
> +#define BMI088_ACCEL_H
> +
> +extern const struct regmap_config bmi088_regmap_conf;
> +extern const struct dev_pm_ops bmi088_accel_pm_ops;
> +
> +int bmi088_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
> + const char *name, bool block_supported);
> +int bmi088_accel_core_remove(struct device *dev);
> +
> +#endif /* BMI088_ACCEL_H */
