From: Etienne Carriere <etienne.carriere@xxxxxx>
Use devm_reset_control_get_optional_exclusive() instead of
devm_reset_control_get_exclusive() as reset controller is optional.
Nevertheless if reset controller is expected but reports an
error, propagate the error code to the caller. In such case
a nice error trace is emitted unless we're deferring the probe
operation.
Signed-off-by: Etienne Carriere <etienne.carriere@xxxxxx>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
---
drivers/iio/dac/stm32-dac-core.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/dac/stm32-dac-core.c b/drivers/iio/dac/stm32-dac-core.c
index 4d93446..7e5809b 100644
--- a/drivers/iio/dac/stm32-dac-core.c
+++ b/drivers/iio/dac/stm32-dac-core.c
@@ -147,8 +147,16 @@ static int stm32_dac_probe(struct platform_device *pdev)
priv->common.vref_mv = ret / 1000;
dev_dbg(dev, "vref+=%dmV\n", priv->common.vref_mv);
- rst = devm_reset_control_get_exclusive(dev, NULL);
- if (!IS_ERR(rst)) {
+ rst = devm_reset_control_get_optional_exclusive(dev, NULL);
+ if (rst) {
+ if (IS_ERR(rst)) {
+ ret = PTR_ERR(rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "reset get failed, %d\n", ret);
+
+ goto err_hw_stop;
+ }
+
reset_control_assert(rst);
udelay(2);
reset_control_deassert(rst);
--
2.7.4
