Re: [PATCH v2] iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()

[Fabrice Gasnier <fabrice.gasnier@xxxxxx>]

On 1/7/20 12:41 PM, Peter Ujfalusi wrote:
> dma_request_slave_channel() is a wrapper on top of dma_request_chan()
> eating up the error code.
> 
> By using dma_request_chan() directly the driver can support deferred
> probing against DMA.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> ---
> Hi,
> 
> Changes since v1:
> - Fall back to IRQ mode only in case of ENODEV
> 
> Regards,
> Peter

Hi Peter,

Thanks for the patch,

In case you send another version... I've just a minor suggestion
regarding the comment (see after). Apart from that, you can add my:

Acked-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>

Best Regards,
Fabrice

> 
>  drivers/iio/adc/stm32-adc.c | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 3b291d72701c..df5f5d61f9f9 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -1746,9 +1746,21 @@ static int stm32_adc_dma_request(struct iio_dev *indio_dev)
>  	struct dma_slave_config config;
>  	int ret;
>  
> -	adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
> -	if (!adc->dma_chan)
> +	adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
> +	if (IS_ERR(adc->dma_chan)) {
> +		ret = PTR_ERR(adc->dma_chan);
> +		if (ret != -ENODEV) {
> +			if (ret != -EPROBE_DEFER)
> +				dev_err(&indio_dev->dev,
> +					"DMA channel request failed with %d\n",
> +					ret);
> +			return ret;
> +		}
> +
> +		/* Ignore errors to fall back to IRQ mode */
		               ^
		          error
alternate suggestion:
		/* DMA is optional: fall back to IRQ mode */

> +		adc->dma_chan = NULL;
>  		return 0;
> +	}
>  
>  	adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev,
>  					 STM32_DMA_BUFFER_SIZE,
>