The following changes since commit 2611045e3555cd0d75837ae69ffd70ef51e28bf7:
staging: vchiq: Refactor indentation in vchiq_platform_conn_state_changed() (2019-11-15 14:14:55 +0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.6a
for you to fetch changes up to c1d1c4a62db5c4745b9e15cfee0daf0f774f73fc:
iio: accel: bma180: BMA254 support (2019-12-30 16:29:09 +0000)
----------------------------------------------------------------
First set of new device support, features and cleanups for IIO in the 5.6 cycle
New device support
* ad7091r5 ADC
- New driver with follow up patch adding scale and vref support.
- DT bindings
* ad7923
- Support for ad7908, ad7918 and ad7928 added to driver.
* bma180
- Support the BMA254 accelerometer. Required fairly substantial rework
to allow for small differences between this an existing parts.
* bma400 accelerometer
- New driver with follow up patch for regulator support.
- DT bindings.
* asc dlhl60d
- New driver support this range of pressure and temperature sensors.
- DT bindings.
* ltc2496 ADC
- New driver to support this ADC.
- Split the existing LTC2497 driver generic component out and reuse.
- DT bindings.
* parallax ping
- New driver supporting ultrasonic and laser tof distance sensors.
- Bindings for these sensors.
New features
* core
- New char type for read_raw returns, used for thermocouple types.
- Rename read_first_n callback to read. The reasons behind the original
naming are lost to the mists of time.
* ad799x
- Allow pm_ops to disable device completely allowing regulator power down.
* bma180
- Enable basic regulator support.
* dmaengine buffer
- Report platform data alignment requirements via new ABI.
* max31856
- Add option to set mains filter rejection frequency and document
new in_temp_filter_notch_center_frequency ABI.
- Add support for configuring HW averaging (oversampling ratio)
- Add runtime configuration of thermocouple type and document new ABI.
* maxim-thermocouple
- Add read only access to thermocouple type using new ABI, includes
adding more specific compatibles to reflect which variant of the
chip is being used.
* mpu6050
- Provide option to support the PMU9150 in package magnetometer directly
rather than via auxiliary bus.
* stm32_adc
- Add overrun interrupt checks to detect if this happens.
* st_lsm6dsx
- Enable the sensor-hub support for lsm6dsm. Includes various reworks to
allow this.
Cleanups and minor fixes
* Subsystem wide
- Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
- Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
* ad7266
- Convert to GPIO descriptors.
* ad7303
- Avoid a dance with checking if the regulator is supplied by just
using the optional request interface.
* ad7887
- Simplify channel specification assignment to enable adding more devices.
* ad7923
- Drop some unused and largely pointless defines of BOB_N==N variety.
- Tidy up checkpatch warnings.
- Add missing of_device_id table.
* adf4350
- Convert to GPIO descriptors.
* ak8975
- Convert to GPIO descriptors.
* ADIS library and drivers
- Expand scope of txrx_lock to cover all state and rename as state_lock
- Add unlocked read / write to allow grouping of consecutive calls under
single lock / unlock.
- Add unlocked check_status, reset to allow grouping under single
lock / unlock.
- Remove remaining uses of core mlock for local state protection.
mlock should never be used directly as it protects tightly defined
core IIO device management state.
* adis16240
- Enforce only supported SPI mode on driver load + add DT binding doc.
* atlas-ph-sensor
- Rename to atlas-sensor given it now covers things beyond ph sensors.
* bma180
- Use local dev variable to tidy up code.
- Use c99 style explicity .member assignment to make driver more readable.
* bmp280
- Drop ACPI support. No evidence this was used and appropriate ID is not
registered.
- Allow ACPI to bind device via PRP0001
* dmaengine buffer
- Use dma_request_chan instead of dma_request_slave_channel_reason as that
ABI is going away.
- Add module info to avoid tainting the kernel.
* hts221
- Avoid magic number defines when only used to fill structure elements
that are self describing.
* lm3533
- Drop a stray semicolon.
* max9611
- Cleanup enum handling to be more resilient to future changes.
* mpu6050
- Delete MPU9150 from supported SPI devices as doesn't provide SPI.
- Select I2C_MUX again after kbuild issue fixed elsewhere.
* stm32-timer
- Drop an unnecessary register update.
* ssp_sensors
- Convert to GPIO descriptors.
* st_sensors
- drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
anyway.
- Make default platform data structures __maybe_unsued.
- Fill in some missing kernel-doc function parameters.
* st_lsm6dsx
- white space fixes.
- Mark some constants that aren't always used as __maybe_unused.
- Drop of ID table guards as they just pervent use under ACPI.
- Switch to device properties to allow ACPI usage.
* st_uvis25
- Drop acpi.h include as no ACPI APIs used.
* ti-ads1015
- Drop legacy platform data as no one seems to be using it.
- Use the device property API instead of OF specific.
* ti-ads7950
- typo fix in error message.
----------------------------------------------------------------
Alexandru Ardelean (11):
iio: imu: adis: rename txrx_lock -> state_lock
iio: imu: adis: add unlocked read/write function versions
iio: imu: adis[16480]: group RW into a single lock in adis_enable_irq()
iio: imu: adis: create an unlocked version of adis_check_status()
iio: imu: adis: create an unlocked version of adis_reset()
iio: imu: adis: protect initial startup routine with state lock
iio: imu: adis: group single conversion under a single state lock
iio: imu: adis16400: rework locks using ADIS library's state lock
iio: gyro: adis16136: rework locks using ADIS library's state lock
iio: imu: adis16480: use state lock for filter freq set
iio: gyro: adis16260: replace mlock with ADIS lib's state_lock
Alexandru Tachici (1):
iio: dac: ad7303: use regulator get optional to check for ext supply
Andrea Merello (9):
iio: max31856: add option for setting mains filter rejection frequency
Documentation: ABI: document IIO in_temp_filter_notch_center_frequency file
iio: max31856: add support for configuring the HW averaging
iio: core: add char type for sysfs attributes
iio: core: add thermocouple_type standard attribute
Documentation: ABI: document IIO thermocouple_type file
iio: max31856: add support for runtime-configuring the thermocouple type
iio: maxim_thermocouple: add thermocouple_type sysfs attribute
dt-bindings: iio: maxim_thermocouple: document new 'compatible' strings
Andreas Klinger (4):
dt-bindings: add vendor prefix parallax
dt-bindings: add parallax ping sensors
MAINTAINERS: add maintainer for ping iio sensors
iio: ping: add parallax ping sensors
Andy Shevchenko (14):
iio: adc: ti-ads1015: Get rid of legacy platform data
iio: adc: ti-ads1015: Make use of device property API
iio: st_lsm6dsx: Mark predefined constants with __maybe_unused
iio: st_lsm6dsx: Drop unneeded OF code
iio: st_lsm6dsx: Make use of device properties
iio: light: st_uvis25: Drop unneeded header inclusion
iio: accel: st_accel: Drop unnecessary #else branch for ACPI
iio: pressure: st_press: Drop unnecessary #else branch for ACPI
iio: gyro: st_gyro: Mark gyro_pdata with __maybe_unused
iio: accel: st_accel: Mark default_accel_pdata with __maybe_unused
iio: pressure: st_press: Mark default_press_pdata with __maybe_unused
iio: st_sensors: Describe function parameters in kernel-doc
iio: pressure: bmp280: Drop ACPI support
iio: pressure: bmp280: Allow device to be enumerated from ACPI
Beniamin Bia (4):
dt-binding: iio: Add documentation for AD7091R5
MAINTAINERS: add entry for AD7091R5 driver
iio: adc: ad7887: Cleanup channel assignment
iio: adc: Move AD7091R5 entry in a alphabetical order in Makefile
Chen Zhou (1):
iio: light: remove unneeded semicolon
Christophe JAILLET (1):
iio: adc: ti-ads7950: Fix a typo in an error message
Dan Robertson (3):
dt-bindings: iio: accel: bma400: add bindings
iio: accel: Add driver for the BMA400
iio: accel: bma400: basic regulator support
Daniel Junho (4):
iio: adc: ad7923: Remove the unused defines
iio: adc: ad7923: Fix checkpatch warning
iio: adc: ad7923: Add of_device_id table
iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928
Fabrice Gasnier (2):
iio: trigger: stm32-timer: remove unnecessary update event
iio: adc: stm32-adc: Add check on overrun interrupt
Geert Uytterhoeven (1):
iio: adc: max9611: Make enum relations more future proof
Jean-Baptiste Maneyrol (2):
iio: imu: inv_mpu6050: delete not existing MPU9150 spi support
iio: imu: inv_mpu6050: add support of MPU9150 magnetometer
Krzysztof Kozlowski (1):
iio: Fix Kconfig indentation
Lars-Peter Clausen (3):
iio: buffer-dmaengine: Add module information
iio: buffer-dmaengine: Report buffer length requirements
iio: buffer: rename 'read_first_n' callback to 'read'
Linus Walleij (16):
iio: imu: inv_mpu6050: Select I2C_MUX again
iio: ak8975: Convert to use GPIO descriptor
iio: as3935: Drop GPIO includes
iio: si1145: Drop GPIO include
iio: ad2s1200: Drop legacy include
iio: apds9960: Drop GPIO includes
iio: itg3200: Drop GPIO include
iio: adf4350: Convert to use GPIO descriptor
iio: ad5592r: Drop surplus GPIO header
iio: ad7266: Convert to use GPIO descriptors
iio: atlas-ph-sensor: Drop GPIO include
iio: ssp_sensors: Convert to use GPIO descriptors
iio: accel: bma180: Add dev helper variable
iio: accel: bma180: Basic regulator support
iio: accel: bma180: Use explicit member assignment
iio: accel: bma180: BMA254 support
Lorenzo Bianconi (8):
iio: imu: st_lsm6dsx: fix checkpatch warning
iio: humidity: hts221: move register definitions to sensor structs
iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
iio: imu: st_lsm6dsx: check if master_enable is located in primary page
iio: imu: st_lsm6dsx: check if pull_up is located in primary page
iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
Marco Felsch (1):
iio: adc: ad799x: add pm_ops to disable the device completely
Matt Ranostay (1):
iio: chemical: atlas-ph-sensor: rename atlas-ph-sensor to atlas-sensor
Olivier Moysan (1):
dt-bindings: iio: adc: convert sd modulator to json-schema
Paul Cercueil (2):
iio: adc: Add support for AD7091R5 ADC
iio: adc: ad7091r5: Add scale and external VREF support
Peter Ujfalusi (1):
iio: buffer-dmaengine: Use dma_request_chan() directly for channel request
Rodrigo Carvalho (2):
staging: iio: accel: adis16240: enforce SPI mode on probe function
dt-bindings: iio: accel: add binding documentation for ADIS16240
Tomislav Denis (3):
iio: pressure: Add driver for DLH pressure sensors
dt-bindings: Add asc vendor
bindings: iio: pressure: Add documentation for dlh driver
Uwe Kleine-König (3):
iio: adc: ltc2496: provide device tree binding document
iio: adc: ltc2497: split protocol independent part in a separate module
iio: adc: new driver to support Linear technology's ltc2496
Documentation/ABI/testing/sysfs-bus-iio | 13 +
Documentation/ABI/testing/sysfs-bus-iio-dma-buffer | 19 +
.../bindings/iio/accel/adi,adis16240.yaml | 49 ++
.../devicetree/bindings/iio/accel/bma180.txt | 7 +-
.../bindings/iio/accel/bosch,bma400.yaml | 54 ++
.../devicetree/bindings/iio/adc/adi,ad7091r5.yaml | 54 ++
.../devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 47 ++
.../bindings/iio/adc/sigma-delta-modulator.txt | 13 -
.../bindings/iio/adc/sigma-delta-modulator.yaml | 37 +
.../bindings/iio/pressure/asc,dlhl60d.yaml | 51 ++
.../bindings/iio/proximity/parallax-ping.yaml | 51 ++
.../iio/temperature/maxim_thermocouple.txt | 7 +-
.../devicetree/bindings/vendor-prefixes.yaml | 4 +
MAINTAINERS | 32 +-
drivers/iio/accel/Kconfig | 20 +-
drivers/iio/accel/Makefile | 2 +
drivers/iio/accel/bma180.c | 225 +++++-
drivers/iio/accel/bma400.h | 99 +++
drivers/iio/accel/bma400_core.c | 852 +++++++++++++++++++++
drivers/iio/accel/bma400_i2c.c | 61 ++
drivers/iio/accel/st_accel.h | 2 +-
drivers/iio/accel/st_accel_i2c.c | 2 -
drivers/iio/adc/Kconfig | 17 +
drivers/iio/adc/Makefile | 4 +-
drivers/iio/adc/ad7091r-base.c | 298 +++++++
drivers/iio/adc/ad7091r-base.h | 26 +
drivers/iio/adc/ad7091r5.c | 113 +++
drivers/iio/adc/ad7266.c | 29 +-
drivers/iio/adc/ad7887.c | 82 +-
drivers/iio/adc/ad7923.c | 64 +-
drivers/iio/adc/ad799x.c | 66 +-
drivers/iio/adc/ltc2496.c | 108 +++
drivers/iio/adc/ltc2497-core.c | 243 ++++++
drivers/iio/adc/ltc2497.c | 234 +-----
drivers/iio/adc/ltc2497.h | 18 +
drivers/iio/adc/max9611.c | 36 +-
drivers/iio/adc/stm32-adc-core.c | 14 +-
drivers/iio/adc/stm32-adc-core.h | 9 +
drivers/iio/adc/stm32-adc.c | 55 +-
drivers/iio/adc/ti-ads1015.c | 73 +-
drivers/iio/adc/ti-ads7950.c | 2 +-
drivers/iio/buffer/industrialio-buffer-dma.c | 2 +-
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 30 +-
drivers/iio/buffer/kfifo_buf.c | 5 +-
drivers/iio/chemical/Makefile | 2 +-
.../chemical/{atlas-ph-sensor.c => atlas-sensor.c} | 11 +-
drivers/iio/common/ssp_sensors/ssp.h | 14 +-
drivers/iio/common/ssp_sensors/ssp_dev.c | 29 +-
drivers/iio/common/ssp_sensors/ssp_spi.c | 8 +-
drivers/iio/common/st_sensors/st_sensors_trigger.c | 3 +
drivers/iio/dac/ad5592r-base.c | 1 -
drivers/iio/dac/ad7303.c | 25 +-
drivers/iio/frequency/adf4350.c | 30 +-
drivers/iio/gyro/Kconfig | 32 +-
drivers/iio/gyro/adis16136.c | 31 +-
drivers/iio/gyro/adis16260.c | 6 +-
drivers/iio/gyro/itg3200_core.c | 1 -
drivers/iio/gyro/st_gyro.h | 2 +-
drivers/iio/humidity/hts221_core.c | 19 +-
drivers/iio/iio_core.h | 8 +-
drivers/iio/imu/adis.c | 94 +--
drivers/iio/imu/adis16400.c | 51 +-
drivers/iio/imu/adis16480.c | 17 +-
drivers/iio/imu/adis_buffer.c | 4 +-
drivers/iio/imu/inv_mpu6050/Kconfig | 9 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 57 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +
drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 80 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 1 -
drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 1 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 30 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 27 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 110 ++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 3 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 76 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 3 +-
drivers/iio/industrialio-buffer.c | 10 +-
drivers/iio/industrialio-core.c | 25 +-
drivers/iio/light/apds9960.c | 2 -
drivers/iio/light/lm3533-als.c | 2 +-
drivers/iio/light/si1145.c | 1 -
drivers/iio/light/st_uvis25_i2c.c | 1 -
drivers/iio/magnetometer/ak8975.c | 54 +-
drivers/iio/pressure/Kconfig | 12 +
drivers/iio/pressure/Makefile | 1 +
drivers/iio/pressure/bmp280-i2c.c | 18 +-
drivers/iio/pressure/dlhl60d.c | 375 +++++++++
drivers/iio/pressure/st_pressure.h | 2 +-
drivers/iio/pressure/st_pressure_i2c.c | 2 -
drivers/iio/proximity/Kconfig | 15 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/as3935.c | 3 -
drivers/iio/proximity/ping.c | 335 ++++++++
drivers/iio/resolver/ad2s1200.c | 1 -
drivers/iio/temperature/max31856.c | 134 +++-
drivers/iio/temperature/maxim_thermocouple.c | 44 +-
drivers/iio/trigger/stm32-timer-trigger.c | 3 -
drivers/staging/iio/accel/adis16240.c | 7 +
include/Kbuild | 1 -
include/linux/iio/buffer_impl.h | 6 +-
include/linux/iio/frequency/adf4350.h | 4 -
include/linux/iio/imu/adis.h | 150 +++-
include/linux/iio/magnetometer/ak8975.h | 2 -
include/linux/iio/types.h | 2 +
include/linux/platform_data/ad7266.h | 3 -
include/linux/platform_data/ads1015.h | 23 -
106 files changed, 4394 insertions(+), 861 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dma-buffer
create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
create mode 100644 Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
create mode 100644 Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
create mode 100644 drivers/iio/accel/bma400.h
create mode 100644 drivers/iio/accel/bma400_core.c
create mode 100644 drivers/iio/accel/bma400_i2c.c
create mode 100644 drivers/iio/adc/ad7091r-base.c
create mode 100644 drivers/iio/adc/ad7091r-base.h
create mode 100644 drivers/iio/adc/ad7091r5.c
create mode 100644 drivers/iio/adc/ltc2496.c
create mode 100644 drivers/iio/adc/ltc2497-core.c
create mode 100644 drivers/iio/adc/ltc2497.h
rename drivers/iio/chemical/{atlas-ph-sensor.c => atlas-sensor.c} (98%)
create mode 100644 drivers/iio/pressure/dlhl60d.c
create mode 100644 drivers/iio/proximity/ping.c
delete mode 100644 include/linux/platform_data/ads1015.h
