From: Tomislav Denis <tomislav.denis@xxxxxxx> Add a device tree binding documentation for DLH series pressure sensors. Signed-off-by: Tomislav Denis <tomislav.denis@xxxxxxx> --- .../bindings/iio/pressure/asc,dlh-i2c.yaml | 51 ++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/pressure/asc,dlh-i2c.yaml diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlh-i2c.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlh-i2c.yaml new file mode 100644 index 0000000..5de2277 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlh-i2c.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/dlh-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: All Sensors DLH series low voltage digital pressure sensors + +maintainers: + - Tomislav Denis <tomislav.denis@xxxxxxx> + +description: | + Bindings for the All Sensors DLH series pressure sensors. + + Specifications about the sensors can be found at: + http://www.allsensors.com/cad/DS-0355_Rev_B.PDF + +properties: + compatible: + enum: + - asc,dlhl60d + - asc,dlhl60g + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + description: interrupt mapping for EOC(data ready) pin + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pressure@29 { + compatible = "asc,dlhl60d"; + reg = <0x29>; + interrupt-parent = <&gpio0>; + interrupts = <10 IRQ_TYPE_EDGE_RISING>; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 39d6f0f..8f0eab0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -674,6 +674,7 @@ W: http://www.allsensors.com/ S: Maintained L: linux-iio@xxxxxxxxxxxxxxx F: drivers/iio/pressure/dlh-i2c.c +F: Documentation/devicetree/bindings/iio/pressure/dlh-i2c.yaml ALLEGRO DVT VIDEO IP CORE DRIVER M: Michael Tretter <m.tretter@xxxxxxxxxxxxxx> -- 2.7.4
