We added a sysfs ABI for getting/setting the type of a thermocouple. This
driver supports chips that support specific fixed thermocouple types; we
cannot set it, but still we can add this sysfs attribute in RO mode to
read-back the thermocouple type.
This driver supports actually several chips:
- max6675
- max31855[k/j/n/s/t/e/r]asa family
Max6675 supports only K-type thermocouples, so we can just report that.
Each chip in max31855 family supports just one specific thermocouple type
(in the obvious way: i.e. max31855jasa supports J-type). This driver did
accept a generic SPI ID and OF compatible "max31855" which does not give
any clue about which chip is really involved (and unfortunately it seems
we have no way to detect it).
This patch introduces a new set of, more specific, SPI IDs and OF
compatible strings to better match the chip type.
The old, generic, "max31855" binding is kept for compatibility reasons, but
this patch aims to deprecate it, so, should we hit it, a warning is spit.
In such case the reported thermocouple type in sysfs is '?', because we
have no way to know.
Regarding the implementation: the thermocouple type information is stored
in the driver private data and I've kept only two maxim_thermocouple_chip
types in order to avoid a lot of duplications (seven chip types with just
a different thermocouple type).
RFT because I have no real HW to test this.
Cc: Hartmut Knaack <knaack.h@xxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
Cc: Colin Ian King <colin.king@xxxxxxxxxxxxx>
Cc: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
Cc: Matt Weber <matthew.weber@xxxxxxxxxxxxxxxxxxx>
Cc: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
Cc: Chuhong Yuan <hslester96@xxxxxxxxx>
Cc: Daniel Gomez <dagmcr@xxxxxxxxx>
Cc: linux-iio@xxxxxxxxxxxxxxx
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Andrea Merello <andrea.merello@xxxxxxxxx>
---
drivers/iio/temperature/maxim_thermocouple.c | 44 ++++++++++++++++++--
1 file changed, 41 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c
index d1360605209c..9906b31fe863 100644
--- a/drivers/iio/temperature/maxim_thermocouple.c
+++ b/drivers/iio/temperature/maxim_thermocouple.c
@@ -14,6 +14,7 @@
#include <linux/of_device.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
@@ -24,13 +25,25 @@
enum {
MAX6675,
MAX31855,
+ MAX31855K,
+ MAX31855J,
+ MAX31855N,
+ MAX31855S,
+ MAX31855T,
+ MAX31855E,
+ MAX31855R,
+};
+
+const char maxim_tc_types[] = {
+ 'K', '?', 'K', 'J', 'N', 'S', 'T', 'E', 'R'
};
static const struct iio_chan_spec max6675_channels[] = {
{ /* thermocouple temperature */
.type = IIO_TEMP,
.info_mask_separate =
- BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE),
.scan_index = 0,
.scan_type = {
.sign = 's',
@@ -48,7 +61,8 @@ static const struct iio_chan_spec max31855_channels[] = {
.type = IIO_TEMP,
.address = 2,
.info_mask_separate =
- BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE),
.scan_index = 0,
.scan_type = {
.sign = 's',
@@ -110,6 +124,7 @@ struct maxim_thermocouple_data {
const struct maxim_thermocouple_chip *chip;
u8 buffer[16] ____cacheline_aligned;
+ char tc_type;
};
static int maxim_thermocouple_read(struct maxim_thermocouple_data *data,
@@ -196,6 +211,10 @@ static int maxim_thermocouple_read_raw(struct iio_dev *indio_dev,
ret = IIO_VAL_INT;
}
break;
+ case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+ *val = data->tc_type;
+ ret = IIO_VAL_CHAR;
+ break;
}
return ret;
@@ -210,8 +229,9 @@ static int maxim_thermocouple_probe(struct spi_device *spi)
const struct spi_device_id *id = spi_get_device_id(spi);
struct iio_dev *indio_dev;
struct maxim_thermocouple_data *data;
+ const int chip_type = (id->driver_data == MAX6675) ? MAX6675 : MAX31855;
const struct maxim_thermocouple_chip *chip =
- &maxim_thermocouple_chips[id->driver_data];
+ &maxim_thermocouple_chips[chip_type];
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data));
@@ -229,6 +249,7 @@ static int maxim_thermocouple_probe(struct spi_device *spi)
data = iio_priv(indio_dev);
data->spi = spi;
data->chip = chip;
+ data->tc_type = maxim_tc_types[id->driver_data];
ret = devm_iio_triggered_buffer_setup(&spi->dev,
indio_dev, NULL,
@@ -236,12 +257,22 @@ static int maxim_thermocouple_probe(struct spi_device *spi)
if (ret)
return ret;
+ if (id->driver_data == MAX31855)
+ dev_warn(&spi->dev, "generic max31855 ID is deprecated\nplease use more specific part type");
+
return devm_iio_device_register(&spi->dev, indio_dev);
}
static const struct spi_device_id maxim_thermocouple_id[] = {
{"max6675", MAX6675},
{"max31855", MAX31855},
+ {"max31855k", MAX31855K},
+ {"max31855j", MAX31855J},
+ {"max31855n", MAX31855N},
+ {"max31855s", MAX31855S},
+ {"max31855t", MAX31855T},
+ {"max31855e", MAX31855E},
+ {"max31855r", MAX31855R},
{},
};
MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id);
@@ -249,6 +280,13 @@ MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id);
static const struct of_device_id maxim_thermocouple_of_match[] = {
{ .compatible = "maxim,max6675" },
{ .compatible = "maxim,max31855" },
+ { .compatible = "maxim,max31855k" },
+ { .compatible = "maxim,max31855j" },
+ { .compatible = "maxim,max31855n" },
+ { .compatible = "maxim,max31855s" },
+ { .compatible = "maxim,max31855t" },
+ { .compatible = "maxim,max31855e" },
+ { .compatible = "maxim,max31855r" },
{ },
};
MODULE_DEVICE_TABLE(of, maxim_thermocouple_of_match);
--
2.17.1
