Documentation for ADM1177 was added. Signed-off-by: Beniamin Bia <beniamin.bia@xxxxxxxxxx> --- .../bindings/iio/adc/adi,adm1177.yaml | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml b/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml new file mode 100644 index 000000000000..69a0230e59f5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,adm1177.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,adm1177.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor + +maintainers: + - Michael Hennerich <michael.hennerich@xxxxxxxxxx> + - Beniamin Bia <beniamin.bia@xxxxxxxxxx> + +description: | + Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor + https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf + +properties: + compatible: + enum: + - adi,adm1177 + + reg: + maxItems: 1 + + avcc-supply: + description: + Phandle to the Avcc power supply + + adi,r-sense-micro-ohms: + description: + The value of curent sense resistor in microohms. + + adi,shutdown-threshold-microamp: + description: + Specifies the current level at which an over current alert occurs. + maximum: 255 + + adi,vrange-high-enable: + description: + Specifies which internal voltage divider to be used. A 1 selects + a 7:2 voltage divider while a 0 selects a 14:1 voltage divider. + type: boolean +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@b4 { + compatible = "adi,adm1177"; + reg = <0xb4>; + }; + }; +... -- 2.17.1
