Oi Fabio,
Thanks for the review.
On Mon 04 Feb 2019 at 18:16, Fabio Estevam wrote:
Hi Rui,
On Mon, Feb 4, 2019 at 3:25 PM Rui Miguel Silva
<rui.silva@xxxxxxxxxx> wrote:
Add device tree bindings for the FXAS2100x gyroscope.
Please name it after the real part number: FXAS21002.
Yeah, right now it supports the FXAS21002 but if someone wants to
support for example the FXAS21000 it will be easier and the naming
just there, the main differences are ranges. But as we here are
starting with the FXAS210002, I tend to agree.
Signed-off-by: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
---
.../bindings/iio/gyroscope/fxas2100x.txt | 14
++++++++++++++
1 file changed, 14 insertions(+)
create mode 100644
Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt
diff --git
a/Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt
b/Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt
new file mode 100644
index 000000000000..2aeef9aafec4
--- /dev/null
+++
b/Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt
@@ -0,0 +1,14 @@
+* NXP FXAS2100X Gyroscope device tree bindings
+
+http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
+
+Required properties:
+ - compatible : should be "nxp,fxas2100x"
We usually don't put x in the end. Better put the real part
number
instead: "nxp,fxas21002"
Yeah, agree.
+ - reg : the I2C address of the sensor
Please describe the VDD and VDDIO regulators as well in the
dt-bindings and also add support for enabling them in the
driver.
Will do.
---
Cheers,
Rui
