Hi Rui, On Mon, Feb 4, 2019 at 3:25 PM Rui Miguel Silva <rui.silva@xxxxxxxxxx> wrote: > > Add device tree bindings for the FXAS2100x gyroscope. Please name it after the real part number: FXAS21002. > > Signed-off-by: Rui Miguel Silva <rui.silva@xxxxxxxxxx> > --- > .../bindings/iio/gyroscope/fxas2100x.txt | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt > > diff --git a/Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt b/Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt > new file mode 100644 > index 000000000000..2aeef9aafec4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/gyroscope/fxas2100x.txt > @@ -0,0 +1,14 @@ > +* NXP FXAS2100X Gyroscope device tree bindings > + > +http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C > + > +Required properties: > + - compatible : should be "nxp,fxas2100x" We usually don't put x in the end. Better put the real part number instead: "nxp,fxas21002" > + - reg : the I2C address of the sensor Please describe the VDD and VDDIO regulators as well in the dt-bindings and also add support for enabling them in the driver.
