On Thu, Jul 12, 2018 at 06:36:00PM +0300, Stefan Popa wrote: > This patch adds support for the adxl372 FIFO. In order to accomplish this, > triggered buffers were used. > > The number of FIFO samples which trigger the watermark interrupt can be > configured by using the buffer watermark, while the format depends on the > selected channels.The FIFO data along with the timestamp is pushed to the > IIO device's buffer. > > Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx> > --- > .../devicetree/bindings/iio/accel/adxl372.txt | 7 + This belongs in patch 2. Bindings should reflect the h/w, not driver features. > drivers/iio/accel/adxl372.c | 346 ++++++++++++++++++++- > 2 files changed, 352 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt > index fea4baf..73d7e03 100644 > --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt > +++ b/Documentation/devicetree/bindings/iio/accel/adxl372.txt > @@ -7,10 +7,17 @@ Required properties: > - reg: SPI chip select number for the device > - spi-max-frequency: Max SPI frequency to use > > +Optional properties: > + - interrupt-parent: phandle to the parent interrupt controller Don't need to put this in the binding. > + - interrupts: interrupt mapping for GPIO IRQ, it should by configured with > + flag IRQ_TYPE_EDGE_FALLING > + > Example: > > accelerometer@0 { > compatible = "adi,adxl372"; > reg = <0>; > spi-max-frequency = <1000000>; > + interrupt-parent = <&gpio>; > + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; > }; -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html