This patch adds basic support for Analog Devices ADXL372 SPI-Bus Three-Axis Digital Accelerometer. The device is probed and configured the with some initial default values. With this basic driver, it is possible to read raw acceleration data. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL372.pdf Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx> --- MAINTAINERS | 6 + drivers/iio/accel/Kconfig | 11 + drivers/iio/accel/Makefile | 1 + drivers/iio/accel/adxl372.c | 483 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 501 insertions(+) create mode 100644 drivers/iio/accel/adxl372.c diff --git a/MAINTAINERS b/MAINTAINERS index 60b1028..2ba47bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -543,6 +543,12 @@ W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/input/misc/adxl34x.c +ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER +M: Stefan Popa <stefan.popa@xxxxxxxxxx> +W: http://ez.analog.com/community/linux-device-drivers +S: Supported +F: drivers/iio/accel/adxl372.c + AF9013 MEDIA DRIVER M: Antti Palosaari <crope@xxxxxx> L: linux-media@xxxxxxxxxxxxxxx diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 62ae7e5..1b496ef 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -60,6 +60,17 @@ config ADXL345_SPI will be called adxl345_spi and you will also get adxl345_core for the core module. +config ADXL372 + tristate "Analog Devices ADXL372 3-Axis Accelerometer Driver" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to add support for the Analog Devices ADXL372 triaxial + acceleration sensor. + To compile this driver as a module, choose M here: the + module will be called adxl372. + config BMA180 tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver" depends on I2C diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 636d4d1..5758ffc 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_ADIS16209) += adis16209.o obj-$(CONFIG_ADXL345) += adxl345_core.o obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o +obj-$(CONFIG_ADXL372) += adxl372.o obj-$(CONFIG_BMA180) += bma180.o obj-$(CONFIG_BMA220) += bma220_spi.o obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c new file mode 100644 index 0000000..62ce238 --- /dev/null +++ b/drivers/iio/accel/adxl372.c @@ -0,0 +1,483 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ADXL372 3-Axis Digital Accelerometer SPI driver + * + * Copyright 2018 Analog Devices Inc. + */ + +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/spi/spi.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +/* ADXL372 registers definition */ +#define ADXL372_DEVID 0x00 +#define ADXL372_DEVID_MST 0x01 +#define ADXL372_PARTID 0x02 +#define ADXL372_REVID 0x03 +#define ADXL372_STATUS_1 0x04 +#define ADXL372_STATUS_2 0x05 +#define ADXL372_FIFO_ENTRIES_2 0x06 +#define ADXL372_FIFO_ENTRIES_1 0x07 +#define ADXL372_X_DATA_H 0x08 +#define ADXL372_X_DATA_L 0x09 +#define ADXL372_Y_DATA_H 0x0A +#define ADXL372_Y_DATA_L 0x0B +#define ADXL372_Z_DATA_H 0x0C +#define ADXL372_Z_DATA_L 0x0D +#define ADXL372_X_MAXPEAK_H 0x15 +#define ADXL372_X_MAXPEAK_L 0x16 +#define ADXL372_Y_MAXPEAK_H 0x17 +#define ADXL372_Y_MAXPEAK_L 0x18 +#define ADXL372_Z_MAXPEAK_H 0x19 +#define ADXL372_Z_MAXPEAK_L 0x1A +#define ADXL372_OFFSET_X 0x20 +#define ADXL372_OFFSET_Y 0x21 +#define ADXL372_OFFSET_Z 0x22 +#define ADXL372_X_THRESH_ACT_H 0x23 +#define ADXL372_X_THRESH_ACT_L 0x24 +#define ADXL372_Y_THRESH_ACT_H 0x25 +#define ADXL372_Y_THRESH_ACT_L 0x26 +#define ADXL372_Z_THRESH_ACT_H 0x27 +#define ADXL372_Z_THRESH_ACT_L 0x28 +#define ADXL372_TIME_ACT 0x29 +#define ADXL372_X_THRESH_INACT_H 0x2A +#define ADXL372_X_THRESH_INACT_L 0x2B +#define ADXL372_Y_THRESH_INACT_H 0x2C +#define ADXL372_Y_THRESH_INACT_L 0x2D +#define ADXL372_Z_THRESH_INACT_H 0x2E +#define ADXL372_Z_THRESH_INACT_L 0x2F +#define ADXL372_TIME_INACT_H 0x30 +#define ADXL372_TIME_INACT_L 0x31 +#define ADXL372_X_THRESH_ACT2_H 0x32 +#define ADXL372_X_THRESH_ACT2_L 0x33 +#define ADXL372_Y_THRESH_ACT2_H 0x34 +#define ADXL372_Y_THRESH_ACT2_L 0x35 +#define ADXL372_Z_THRESH_ACT2_H 0x36 +#define ADXL372_Z_THRESH_ACT2_L 0x37 +#define ADXL372_HPF 0x38 +#define ADXL372_FIFO_SAMPLES 0x39 +#define ADXL372_FIFO_CTL 0x3A +#define ADXL372_INT1_MAP 0x3B +#define ADXL372_INT2_MAP 0x3C +#define ADXL372_TIMING 0x3D +#define ADXL372_MEASURE 0x3E +#define ADXL372_POWER_CTL 0x3F +#define ADXL372_SELF_TEST 0x40 +#define ADXL372_RESET 0x41 +#define ADXL372_FIFO_DATA 0x42 + +#define ADXL372_DEVID_VAL 0xAD +#define ADXL372_PARTID_VAL 0xFA +#define ADXL372_RESET_CODE 0x52 + +#define ADXL372_RD_FLAG_MSK(x) ((((x) & 0xFF) << 1) | 0x01) +#define ADXL372_WR_FLAG_MSK(x) (((x) & 0xFF) << 1) + +/* ADXL372_POWER_CTL */ +#define ADXL372_POWER_CTL_MODE_MSK GENMASK_ULL(1, 0) +#define ADXL372_POWER_CTL_MODE(x) (((x) & 0x3) << 0) + +/* ADXL372_MEASURE */ +#define ADXL372_MEASURE_LINKLOOP_MSK GENMASK_ULL(5, 4) +#define ADXL372_MEASURE_LINKLOOP_MODE(x) (((x) & 0x3) << 4) +#define ADXL372_MEASURE_BANDWIDTH_MSK GENMASK_ULL(2, 0) +#define ADXL372_MEASURE_BANDWIDTH_MODE(x) (((x) & 0x7) << 0) + +/* ADXL372_TIMING */ +#define ADXL372_TIMING_ODR_MSK GENMASK_ULL(7, 5) +#define ADXL372_TIMING_ODR_MODE(x) (((x) & 0x7) << 5) + +/* ADXL372_FIFO_CTL */ +#define ADXL372_FIFO_CTL_FORMAT_MSK GENMASK(5, 3) +#define ADXL372_FIFO_CTL_FORMAT_MODE(x) (((x) & 0x7) << 3) +#define ADXL372_FIFO_CTL_MODE_MSK GENMASK(2, 1) +#define ADXL372_FIFO_CTL_MODE_MODE(x) (((x) & 0x3) << 1) +#define ADXL372_FIFO_CTL_SAMPLES_MSK BIT(1) +#define ADXL372_FIFO_CTL_SAMPLES_MODE(x) (((x) > 0xFF) ? 1 : 0) + +/* ADXL372_STATUS_1 */ +#define ADXL372_STATUS_1_DATA_RDY(x) (((x) >> 0) & 0x1) +#define ADXL372_STATUS_1_FIFO_RDY(x) (((x) >> 1) & 0x1) +#define ADXL372_STATUS_1_FIFO_FULL(x) (((x) >> 2) & 0x1) +#define ADXL372_STATUS_1_FIFO_OVR(x) (((x) >> 3) & 0x1) +#define ADXL372_STATUS_1_USR_NVM_BUSY(x) (((x) >> 5) & 0x1) +#define ADXL372_STATUS_1_AWAKE(x) (((x) >> 6) & 0x1) +#define ADXL372_STATUS_1_ERR_USR_REGS(x) (((x) >> 7) & 0x1) + +/* ADXL372_INT1_MAP */ +#define ADXL372_INT1_MAP_DATA_RDY_MSK BIT(0) +#define ADXL372_INT1_MAP_DATA_RDY_MODE(x) (((x) & 0x1) << 0) +#define ADXL372_INT1_MAP_FIFO_RDY_MSK BIT(1) +#define ADXL372_INT1_MAP_FIFO_RDY_MODE(x) (((x) & 0x1) << 1) +#define ADXL372_INT1_MAP_FIFO_FULL_MSK BIT(2) +#define ADXL372_INT1_MAP_FIFO_FULL_MODE(x) (((x) & 0x1) << 2) +#define ADXL372_INT1_MAP_FIFO_OVR_MSK BIT(3) +#define ADXL372_INT1_MAP_FIFO_OVR_MODE(x) (((x) & 0x1) << 3) +#define ADXL372_INT1_MAP_INACT_MSK BIT(4) +#define ADXL372_INT1_MAP_INACT_MODE(x) (((x) & 0x1) << 4) +#define ADXL372_INT1_MAP_ACT_MSK BIT(5) +#define ADXL372_INT1_MAP_ACT_MODE(x) (((x) & 0x1) << 5) +#define ADXL372_INT1_MAP_AWAKE_MSK BIT(6) +#define ADXL372_INT1_MAP_AWAKE_MODE(x) (((x) & 0x1) << 6) +#define ADXL372_INT1_MAP_LOW_MSK BIT(7) +#define ADXL372_INT1_MAP_LOW_MODE(x) (((x) & 0x1) << 7) + +/* + * At +/- 200g with 12-bit resolution, scale is computed as: + * (200 + 200) * 9.81 / (2^12 - 1) = 0.958241 + */ +#define ADXL372_USCALE 958241 + +enum adxl372_op_mode { + ADXL372_STANDBY, + ADXL372_WAKE_UP, + ADXL372_INSTANT_ON, + ADXL372_FULL_BW_MEASUREMENT, +}; + +enum adxl372_act_proc_mode { + ADXL372_DEFAULT, + ADXL372_LINKED, + ADXL372_LOOPED, +}; + +enum adxl372_th_activity { + ADXL372_ACTIVITY, + ADXL372_ACTIVITY2, + ADXL372_INACTIVITY, +}; + +enum adxl372_odr { + ADXL372_ODR_400HZ, + ADXL372_ODR_800HZ, + ADXL372_ODR_1600HZ, + ADXL372_ODR_3200HZ, + ADXL372_ODR_6400HZ, +}; + +enum adxl372_bandwidth { + ADXL372_BW_200HZ, + ADXL372_BW_400HZ, + ADXL372_BW_800HZ, + ADXL372_BW_1600HZ, + ADXL372_BW_3200HZ, +}; + +#define ADXL372_ACCEL_CHANNEL(index, reg, axis) { \ + .type = IIO_ACCEL, \ + .address = reg, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 12, \ + .storagebits = 16, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec adxl372_channels[] = { + ADXL372_ACCEL_CHANNEL(0, ADXL372_X_DATA_H, X), + ADXL372_ACCEL_CHANNEL(1, ADXL372_Y_DATA_H, Y), + ADXL372_ACCEL_CHANNEL(2, ADXL372_Z_DATA_H, Z), +}; + +struct adxl372_state { + struct spi_device *spi; + struct regmap *regmap; + enum adxl372_op_mode op_mode; + enum adxl372_act_proc_mode act_proc_mode; + enum adxl372_odr odr; + enum adxl372_bandwidth bw; +}; + +static int adxl372_read_axis(struct adxl372_state *st, u8 addr) +{ + __be16 regval; + int ret; + + ret = regmap_bulk_read(st->regmap, ADXL372_RD_FLAG_MSK(addr), + ®val, sizeof(regval)); + if (ret < 0) + return ret; + + return be16_to_cpu(regval); +} + +static int adxl372_set_op_mode(struct adxl372_state *st, + enum adxl372_op_mode op_mode) +{ + int ret; + + ret = regmap_update_bits(st->regmap, ADXL372_POWER_CTL, + ADXL372_POWER_CTL_MODE_MSK, + ADXL372_POWER_CTL_MODE(op_mode)); + if (ret < 0) + return ret; + + st->op_mode = op_mode; + + return ret; +} + +static int adxl372_set_odr(struct adxl372_state *st, + enum adxl372_odr odr) +{ + int ret; + + ret = regmap_update_bits(st->regmap, ADXL372_TIMING, + ADXL372_TIMING_ODR_MSK, + ADXL372_TIMING_ODR_MODE(odr)); + if (ret < 0) + return ret; + + st->odr = odr; + + return ret; +} + +static int adxl372_set_bandwidth(struct adxl372_state *st, + enum adxl372_bandwidth bw) +{ + int ret; + + ret = regmap_update_bits(st->regmap, ADXL372_MEASURE, + ADXL372_MEASURE_BANDWIDTH_MSK, + ADXL372_MEASURE_BANDWIDTH_MODE(bw)); + if (ret < 0) + return ret; + + st->bw = bw; + + return ret; +} + +static int adxl372_set_act_proc_mode(struct adxl372_state *st, + enum adxl372_act_proc_mode mode) +{ + int ret; + + ret = regmap_update_bits(st->regmap, + ADXL372_MEASURE, + ADXL372_MEASURE_LINKLOOP_MSK, + ADXL372_MEASURE_LINKLOOP_MODE(mode)); + if (ret < 0) + return ret; + + st->act_proc_mode = mode; + + return ret; +} + +static int adxl372_set_activity_threshold(struct adxl372_state *st, + enum adxl372_th_activity act, + bool ref_en, bool enable, + unsigned int threshold) +{ + unsigned char buf[6]; + unsigned char th_reg_high_val, th_reg_low_val, th_reg_high_addr; + + /* scale factor is 100 mg/code */ + th_reg_high_val = (threshold / 100) >> 3; + th_reg_low_val = ((threshold / 100) << 5) | (ref_en << 1) | enable; + + switch (act) { + case ADXL372_ACTIVITY: + th_reg_high_addr = ADXL372_X_THRESH_ACT_H; + break; + case ADXL372_ACTIVITY2: + th_reg_high_addr = ADXL372_X_THRESH_ACT2_H; + break; + case ADXL372_INACTIVITY: + th_reg_high_addr = ADXL372_X_THRESH_INACT_H; + break; + } + + buf[0] = th_reg_high_val; + buf[1] = th_reg_low_val; + buf[2] = th_reg_high_val; + buf[3] = th_reg_low_val; + buf[4] = th_reg_high_val; + buf[5] = th_reg_low_val; + + return regmap_bulk_write(st->regmap, + ADXL372_WR_FLAG_MSK(th_reg_high_addr), + buf, ARRAY_SIZE(buf)); +} + +static int adxl372_setup(struct adxl372_state *st) +{ + unsigned int regval; + int ret; + + ret = regmap_read(st->regmap, ADXL372_RD_FLAG_MSK(ADXL372_DEVID), + ®val); + if (ret < 0) + return ret; + + if (regval != ADXL372_DEVID_VAL) { + dev_err(&st->spi->dev, "Invalid chip id %x\n", regval); + return -ENODEV; + } + + ret = adxl372_set_op_mode(st, ADXL372_STANDBY); + if (ret < 0) + return ret; + + /* Set threshold for activity detection to 500mg */ + ret = adxl372_set_activity_threshold(st, ADXL372_ACTIVITY, + true, true, 500); + if (ret < 0) + return ret; + + /* Set threshold for inactivity detection to 500mg */ + ret = adxl372_set_activity_threshold(st, ADXL372_INACTIVITY, + true, true, 500); + if (ret < 0) + return ret; + + /* Set activity processing in Looped mode */ + ret = adxl372_set_act_proc_mode(st, ADXL372_LOOPED); + if (ret < 0) + return ret; + + ret = adxl372_set_odr(st, ADXL372_ODR_6400HZ); + if (ret < 0) + return ret; + + ret = adxl372_set_bandwidth(st, ADXL372_BW_3200HZ); + if (ret < 0) + return ret; + + /* Set activity timer */ + ret = regmap_write(st->regmap, + ADXL372_WR_FLAG_MSK(ADXL372_TIME_ACT), 1); + if (ret < 0) + return ret; + + /* Set inactivity timer to 1s */ + ret = regmap_write(st->regmap, + ADXL372_WR_FLAG_MSK(ADXL372_TIME_INACT_L), 0x28); + if (ret < 0) + return ret; + + /* Set the mode of operation to full bandwidth measurement mode */ + return adxl372_set_op_mode(st, ADXL372_FULL_BW_MEASUREMENT); +} + +static int adxl372_reg_access(struct iio_dev *indio_dev, + unsigned int reg, + unsigned int writeval, + unsigned int *readval) +{ + struct adxl372_state *st = iio_priv(indio_dev); + + if (readval) + return regmap_read(st->regmap, ADXL372_RD_FLAG_MSK(reg), + readval); + else + return regmap_write(st->regmap, ADXL372_WR_FLAG_MSK(reg), + writeval); +} + +static int adxl372_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long info) +{ + struct adxl372_state *st = iio_priv(indio_dev); + int ret; + + switch (info) { + case IIO_CHAN_INFO_RAW: + ret = adxl372_read_axis(st, chan->address); + if (ret < 0) + return ret; + + *val = sign_extend32(ret >> chan->scan_type.shift, + chan->scan_type.realbits - 1); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = ADXL372_USCALE; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static const struct iio_info adxl372_info = { + .read_raw = adxl372_read_raw, + .debugfs_reg_access = &adxl372_reg_access, +}; + +static const struct regmap_config adxl372_spi_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .read_flag_mask = BIT(0), +}; + +static int adxl372_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adxl372_state *st; + struct regmap *regmap; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + spi_set_drvdata(spi, indio_dev); + + st->spi = spi; + + regmap = devm_regmap_init_spi(spi, &adxl372_spi_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + st->regmap = regmap; + + indio_dev->channels = adxl372_channels; + indio_dev->num_channels = ARRAY_SIZE(adxl372_channels); + indio_dev->dev.parent = &spi->dev; + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->info = &adxl372_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = adxl372_setup(st); + if (ret < 0) { + dev_err(&st->spi->dev, "ADXL372 setup failed\n"); + return ret; + } + + return devm_iio_device_register(&st->spi->dev, indio_dev); +} + +static const struct spi_device_id adxl372_id[] = { + { "adxl372", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, adxl372_id); + +static struct spi_driver adxl372_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, + .probe = adxl372_probe, + .id_table = adxl372_id, +}; + +module_spi_driver(adxl372_driver); + +MODULE_AUTHOR("Stefan Popa <stefan.popa@xxxxxxxxxx>"); +MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
