On Sun, 11 Feb 2018 11:09:40 +0000
Harald Geyer <harald@xxxxxxxxx> wrote:
> The old code was based on a DHT11 datasheet which specifies a measurement
> range of 20%-90% RH. Turns out the sensor actually reports values outside
> this range, so we should support it as far as possible.
>
> Reported-by: Edward Attfield <edward@xxxxxxxxxxx>
> Signed-off-by: Harald Geyer <harald@xxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as
testing for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/humidity/dht11.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
> index df6bab4..1a9f8f4 100644
> --- a/drivers/iio/humidity/dht11.c
> +++ b/drivers/iio/humidity/dht11.c
> @@ -159,7 +159,7 @@ static int dht11_decode(struct dht11 *dht11, int offset)
> }
>
> dht11->timestamp = ktime_get_boot_ns();
> - if (hum_int < 20) { /* DHT22 */
> + if (hum_int < 4) { /* DHT22: 100000 = (3*256+232)*100 */
> dht11->temperature = (((temp_int & 0x7f) << 8) + temp_dec) *
> ((temp_int & 0x80) ? -100 : 100);
> dht11->humidity = ((hum_int << 8) + hum_dec) * 100;
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
