[PATCH v2 0/2] iio: ad5272: Add support for Analog Devices digital potentiometers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation and driver for the Analog Devices 5272.

Driver currently doesn't support programing the RDAC position to 
non-volatile memory. 

Changes from v1:
- Use sizeof for i2c buffer lens
- Condense code a little when setting up i2c buf
- check val2 in raw write
- Add reset function. Perform a software reset if
  gpio reset pin is not defined
- remove THIS_MODULE assignment
- change of data to use index as per i2c device table


Phil Reid (2):
  dt-bindings: ad5272: Add bindings for Analog Devices digital
    potentiometers
  iio: ad5272: Add support for Analog Devices digital potentiometers

 .../bindings/iio/potentiometer/ad5272.txt          |  27 +++
 drivers/iio/potentiometer/Kconfig                  |  10 +
 drivers/iio/potentiometer/Makefile                 |   1 +
 drivers/iio/potentiometer/ad5272.c                 | 227 +++++++++++++++++++++
 4 files changed, 265 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
 create mode 100644 drivers/iio/potentiometer/ad5272.c

-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux