On Mon, 8 Jan 2018 07:47:36 +0100 Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> wrote: > The labels and branching order of the error path of 'aspeed_adc_probe()' > are broken. > Re-order the labels and goto statements. > > Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> Applied to the fixes-togreg-post-rc1 branch of iio.git. The patch doesn't apply that far back so I'm going to assume you are right and that it was a merge conflict that went wrong. Anyhow, will go in sometime after rc1. Thanks, Jonathan > --- > Not sure where it comes from. > Merge conflict incorrectly fixed? > --- > drivers/iio/adc/aspeed_adc.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c > index 327a49ba1991..9515ca165dfd 100644 > --- a/drivers/iio/adc/aspeed_adc.c > +++ b/drivers/iio/adc/aspeed_adc.c > @@ -243,7 +243,7 @@ static int aspeed_adc_probe(struct platform_device *pdev) > ASPEED_ADC_INIT_POLLING_TIME, > ASPEED_ADC_INIT_TIMEOUT); > if (ret) > - goto scaler_error; > + goto poll_timeout_error; > } > > /* Start all channels in normal mode. */ > @@ -274,9 +274,10 @@ static int aspeed_adc_probe(struct platform_device *pdev) > writel(ASPEED_OPERATION_MODE_POWER_DOWN, > data->base + ASPEED_REG_ENGINE_CONTROL); > clk_disable_unprepare(data->clk_scaler->clk); > -reset_error: > - reset_control_assert(data->rst); > clk_enable_error: > +poll_timeout_error: > + reset_control_assert(data->rst); > +reset_error: > clk_hw_unregister_divider(data->clk_scaler); > scaler_error: > clk_hw_unregister_divider(data->clk_prescaler); -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
