On Fri, 5 Jan 2018 17:21:32 +0200
<alexandru.ardelean@xxxxxxxxxx> wrote:
> From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
>
Say what the patch does before going into details of why
you have done it the way you have.
> Admittedly, this will always use up to
> sizeof(struct ad7192_platform_data) bytes (~12 bytes at most)
> on the stack, during the probing of the device.
>
> But this will maintain most of the other
> init code unchanged.
>
I'm hopeful that you are going to also do any remaining work necessary
to get this out of staging once and for all?
Anyhow, comments inline.
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> ---
> drivers/staging/iio/adc/ad7192.c | 27 +++++++++++++++++++++++++--
> 1 file changed, 25 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
> index cadfb96734ed..fca988330588 100644
> --- a/drivers/staging/iio/adc/ad7192.c
> +++ b/drivers/staging/iio/adc/ad7192.c
> @@ -610,18 +610,41 @@ static const struct iio_chan_spec ad7193_channels[] = {
> IIO_CHAN_SOFT_TIMESTAMP(14),
> };
>
> +static void ad7192_parse_dt(struct device_node *np,
> + struct ad7192_platform_data *pdata)
> +{
> + of_property_read_u16(np, "adi,reference-voltage-mv", &pdata->vref_mv);
> + of_property_read_u8(np, "adi,clock-source-select", &pdata->clock_source_sel);
> + of_property_read_u32(np, "adi,external-clock-Hz", &pdata->ext_clk_hz);
> + pdata->refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable");
> + pdata->rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable");
> + pdata->sinc3_en = of_property_read_bool(np, "adi,sinc3-filter-enable");
> + pdata->chop_en = of_property_read_bool(np, "adi,chop-enable");
> + pdata->buf_en = of_property_read_bool(np, "adi,buffer-enable");
> + pdata->unipolar_en = of_property_read_bool(np, "adi,unipolar-enable");
> + pdata->burnout_curr_en = of_property_read_bool(np, "adi,burnout-currents-enable");
Error checking? No particular reason a devicetree must be right and have all of
these.
> +}
> +
> static int ad7192_probe(struct spi_device *spi)
> {
> const struct ad7192_platform_data *pdata = dev_get_platdata(&spi->dev);
> + const struct device_node *of_node = dev_of_node(&spi->dev);
> + struct ad7192_platform_data lpdata;
> struct ad7192_state *st;
> struct iio_dev *indio_dev;
> int ret, voltage_uv = 0;
>
> - if (!pdata) {
> - dev_err(&spi->dev, "no platform data?\n");
> + if (!pdata && !of_node) {
> + dev_err(&spi->dev, "no platform data or device tree configuration?\n");
> return -ENODEV;
> }
>
> + if (!pdata) {
> + memset(&lpdata, 0, sizeof(lpdata));
> + pdata = &lpdata;
> + ad7192_parse_dt(of_node, pdata);
> + }
> +
> if (!spi->irq) {
> dev_err(&spi->dev, "no IRQ?\n");
> return -ENODEV;
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
