Re: [PATCH] iio/adc/palmas: Use common error handling code in palmas_gpadc_calibrate()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 26 Oct 2017 08:08:49 +0200
SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx> wrote:

> From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
> Date: Thu, 26 Oct 2017 07:58:03 +0200
> 
> * Add a jump target so that a specific error message is stored only once
>   at the end of this function implementation.
> 
> * Adjust condition checks.
> 
> This issue was detected by using the Coccinelle software.
> 
> Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>

Markus,

You need to a apply a check in these cases. If the code is harder
to read afterwards and hence more prone to bugs being introduced
now or in future, it is not a good change.

As such I won't be taking this sort of change.

Jonathan
> ---
>  drivers/iio/adc/palmas_gpadc.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
> index 69b9affeef1e..5e6566692d46 100644
> --- a/drivers/iio/adc/palmas_gpadc.c
> +++ b/drivers/iio/adc/palmas_gpadc.c
> @@ -304,17 +304,13 @@ static int palmas_gpadc_calibrate(struct palmas_gpadc *adc, int adc_chan)
>  
>  	ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
>  				adc->adc_info[adc_chan].trim1_reg, &d1);
> -	if (ret < 0) {
> -		dev_err(adc->dev, "TRIM read failed: %d\n", ret);
> -		goto scrub;
> -	}
> +	if (ret)
> +		goto report_failure;
>  
>  	ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
>  				adc->adc_info[adc_chan].trim2_reg, &d2);
> -	if (ret < 0) {
> -		dev_err(adc->dev, "TRIM read failed: %d\n", ret);
> -		goto scrub;
> -	}
> +	if (ret)
> +		goto report_failure;
>  
>  	/* gain error calculation */
>  	k = (1000 + (1000 * (d2 - d1)) / (x2 - x1));
> @@ -329,6 +325,10 @@ static int palmas_gpadc_calibrate(struct palmas_gpadc *adc, int adc_chan)
>  
>  scrub:
>  	return ret;
> +
> +report_failure:

This makes for complex code flow where it is not needed. As such I am
not going to even think about taking this sort of patch.

> +	dev_err(adc->dev, "TRIM read failed: %d\n", ret);
> +	goto scrub;
>  }
>  
>  static int palmas_gpadc_start_conversion(struct palmas_gpadc *adc, int adc_chan)

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux