This patch set converts several sysfs attributes from directly being
created by the driver to be created by iio_chan_spec and iio_event_spec.
There is also a patch to shorten the length of a variable to fix an
issue that I encountered with some lines that were over 80 characters
with this refactoring.
Driver tested using a TSL2771 hooked up to a Raspberry Pi 2.
List of sysfs attributes before and after my changes:
raspberrypi:/sys/bus/iio/devices/iio:device0$ find . -type f | sort
./dev
./events/in_intensity0_thresh_falling_en
./events/in_intensity0_thresh_falling_value
./events/in_intensity0_thresh_period
./events/in_intensity0_thresh_rising_en
./events/in_intensity0_thresh_rising_value
./events/in_proximity0_thresh_falling_en
./events/in_proximity0_thresh_falling_value
./events/in_proximity0_thresh_period
./events/in_proximity0_thresh_rising_en
./events/in_proximity0_thresh_rising_value
./in_illuminance0_calibrate
./in_illuminance0_calibscale_available
./in_illuminance0_input
./in_illuminance0_integration_time
./in_illuminance0_integration_time_available
./in_illuminance0_lux_table
./in_illuminance0_target_input
./in_intensity0_calibbias
./in_intensity0_calibscale
./in_intensity0_raw
./in_intensity1_raw
./in_proximity0_calibrate
./in_proximity0_raw
./name
./power/autosuspend_delay_ms
./power/control
./power/runtime_active_time
./power/runtime_status
./power/runtime_suspended_time
./uevent
Brian Masney (3):
staging: iio: tsl2x7x: rename tsl2x7x_settings variable to settings
staging: iio: tsl2x7x: migrate in_illuminance0_integration_time sysfs
attribute to iio_chan_spec
staging: iio: tsl2x7x: migrate *_thresh_period sysfs attributes to
iio_event_spec
drivers/staging/iio/light/tsl2x7x.c | 418 ++++++++++++------------------------
1 file changed, 141 insertions(+), 277 deletions(-)
--
2.13.5
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
