On 28/11/16 21:55, William Breathitt Gray wrote:
> The Input/Output Control register (IOR) is offset by 1 from the
> respective channel data register. This patch fixes off-by-one errors
> when attempting to write to a channel IOR where the base address was not
> properly offset.
>
> Fixes: 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8")
> Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
Applied to the fixes-togreg-post-rc1 branch and marked for stable.
Will push out when I next have a net connection and remember!
Jonathan
> ---
> drivers/iio/counter/104-quad-8.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/counter/104-quad-8.c b/drivers/iio/counter/104-quad-8.c
> index 2d2ee35..412d283 100644
> --- a/drivers/iio/counter/104-quad-8.c
> +++ b/drivers/iio/counter/104-quad-8.c
> @@ -153,7 +153,7 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
> ior_cfg = val | priv->preset_enable[chan->channel] << 1;
>
> /* Load I/O control configuration */
> - outb(0x40 | ior_cfg, base_offset);
> + outb(0x40 | ior_cfg, base_offset + 1);
>
> return 0;
> case IIO_CHAN_INFO_SCALE:
> @@ -241,7 +241,7 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
> size_t len)
> {
> struct quad8_iio *const priv = iio_priv(indio_dev);
> - const int base_offset = priv->base + 2 * chan->channel;
> + const int base_offset = priv->base + 2 * chan->channel + 1;
> bool preset_enable;
> int ret;
> unsigned int ior_cfg;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
