On 29/11/16 15:51, William Breathitt Gray wrote:
> The set_to_preset_on_index sysfs attribute provides a boolean
> configuration option to enable a preset operation on the respective
> channel's counter when Index occurs. However, the corresponding
> configuration bit on the Input/Output Control register must be set low
> to enable the preset operation.
>
> This patch inverts the internal driver boolean logic exposed via the
> set_to_preset_on_index attribute in order to correctly configure the
> device which expects an active low bit.
>
> Fixes: 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8")
> Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
Applied to the fixes-togreg-post-rc1 branch and marked for stable.
Thanks,
Jonathan
> ---
> drivers/iio/counter/104-quad-8.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/counter/104-quad-8.c b/drivers/iio/counter/104-quad-8.c
> index 2d2ee35..9847221 100644
> --- a/drivers/iio/counter/104-quad-8.c
> +++ b/drivers/iio/counter/104-quad-8.c
> @@ -233,7 +233,7 @@ static ssize_t quad8_read_set_to_preset_on_index(struct iio_dev *indio_dev,
> const struct quad8_iio *const priv = iio_priv(indio_dev);
>
> return snprintf(buf, PAGE_SIZE, "%u\n",
> - priv->preset_enable[chan->channel]);
> + !priv->preset_enable[chan->channel]);
> }
>
> static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
> @@ -250,6 +250,9 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
> if (ret)
> return ret;
>
> + /* Preset enable is active low in Input/Output Control register */
> + preset_enable = !preset_enable;
> +
> priv->preset_enable[chan->channel] = preset_enable;
>
> ior_cfg = priv->ab_enable[chan->channel] |
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
