Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
.../bindings/iio/multiplexer/iio-mux.txt | 40 ++++++++++++++++++++++
MAINTAINERS | 6 ++++
2 files changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
diff --git a/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
new file mode 100644
index 000000000000..8080cf790d82
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
@@ -0,0 +1,40 @@
+IIO multiplexer bindings
+
+If a multiplexer is used to select which hardware signal is fed to
+e.g. an ADC channel, these bindings describe that situation.
+
+Required properties:
+- compatible : "iio-mux"
+- io-channels : Channel node of the parent channel that has multiplexed
+ input.
+- io-channel-names : Should be "parent".
+- #address-cells = <1>;
+- #size-cells = <0>;
+- mux-controls : Mux controller node to use for operating the mux
+- channels : List of strings, labeling the mux controller states.
+
+The multiplexer state as described in ../misc/mux-controller.txt
+
+For each non-empty string in the channels property, an iio channel will
+be created. The number of this iio channel is the same as the index into
+the list of strings in the channels property, and also matches the mux
+controller state.
+
+Example:
+ mux: mux-controller {
+ compatible = "mux-gpio";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+ <&pioA 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ adc-mux {
+ compatible = "iio-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ mux-controls = <&mux>;
+
+ channels = "sync", "in", system-regulator";
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index dc7498682752..77045ae15865 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6234,6 +6234,12 @@ F: Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
F: Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
F: drivers/iio/adc/envelope-detector.c
+IIO MULTIPLEXER
+M: Peter Rosin <peda@xxxxxxxxxx>
+L: linux-iio@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
+
IIO SUBSYSTEM AND DRIVERS
M: Jonathan Cameron <jic23@xxxxxxxxxx>
R: Hartmut Knaack <knaack.h@xxxxxx>
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
