On 24/11/16 05:31, Rama Krishna Phani A wrote:
> Several ADC channels are supported in PMIC which can be used to
> measure voltage, temperature, current etc. Different scaling can be
> applied on the obtained voltage to report in physical units. Scaling
> functionality can be different per channel. Add scaling support per
> channel. Every channel present in adc has an unique conversion formula
> for obtained voltage. Add support to report in Raw as well as in
> processed format. Scaling is applied when processed read is requested
> and is not applied when a Raw read is requested.
>
> Signed-off-by: Rama Krishna Phani A <rphani@xxxxxxxxxxxxxx>
I obviously didn't make it clear enough in last review.
If you can't return a value in response to reading a sysfs attribute, the
attribute should not exist. See below for a suggestion on this.
Jonathan
> ---
> drivers/iio/adc/qcom-spmi-vadc.c | 435 +++++++++++++++++++++++++++++----------
> 1 file changed, 326 insertions(+), 109 deletions(-)
>
> diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
> index 93c0639..a4e5405 100644
> --- a/drivers/iio/adc/qcom-spmi-vadc.c
> +++ b/drivers/iio/adc/qcom-spmi-vadc.c
> @@ -84,7 +84,7 @@
> #define VADC_MAX_ADC_CODE 0xa800
>
> #define VADC_ABSOLUTE_RANGE_UV 625000
> -#define VADC_RATIOMETRIC_RANGE_UV 1800000
> +#define VADC_RATIOMETRIC_RANGE 1800
>
> #define VADC_DEF_PRESCALING 0 /* 1:1 */
> #define VADC_DEF_DECIMATION 0 /* 512 */
> @@ -100,9 +100,23 @@
>
> #define KELVINMIL_CELSIUSMIL 273150
>
> +#define PMI_CHG_SCALE_1 -138890
> +#define PMI_CHG_SCALE_2 391750000000
> +
> #define VADC_CHAN_MIN VADC_USBIN
> #define VADC_CHAN_MAX VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM
>
> +/**
> + * struct vadc_map_pt - Map the graph representation for ADC channel
> + * @x: Represent the ADC digitized code.
> + * @y: Represent the physical data which can be temperature, voltage,
> + * resistance.
> + */
> +struct vadc_map_pt {
> + s32 x;
> + s32 y;
> +};
> +
> /*
> * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
> * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
> @@ -148,6 +162,9 @@ struct vadc_prescale_ratio {
> * start of conversion.
> * @avg_samples: ability to provide single result from the ADC
> * that is an average of multiple measurements.
> + * @scale_fn: Represents the scaling function to convert voltage
> + * physical units desired by the client for the channel.
> + * Referenced from enum vadc_scale_fn_type.
> */
> struct vadc_channel_prop {
> unsigned int channel;
> @@ -156,6 +173,7 @@ struct vadc_channel_prop {
> unsigned int prescale;
> unsigned int hw_settle_time;
> unsigned int avg_samples;
> + unsigned int scale_fn;
> };
>
> /**
> @@ -186,6 +204,37 @@ struct vadc_priv {
> struct mutex lock;
> };
>
> +/**
> + * struct vadc_scale_fn - Scaling function prototype
> + * @scale: Function pointer to one of the scaling functions
> + * which takes the adc properties, channel properties,
> + * and returns the physical result.
> + */
> +struct vadc_scale_fn {
> + int (*scale)(struct vadc_priv *, const struct vadc_channel_prop *,
> + u16, int *);
> +};
> +
> +/**
> + * enum vadc_scale_fn_type - Scaling function to convert ADC code to
> + * physical scaled units for the channel.
> + * SCALE_DEFAULT: Default scaling to convert raw adc code to voltage (uV).
> + * SCALE_THERM_100K_PULLUP: Returns temperature in millidegC.
> + * Uses a mapping table with 100K pullup.
> + * SCALE_PMIC_THERM: Returns result in milli degree's Centigrade.
> + * SCALE_XOTHERM: Returns XO thermistor voltage in millidegC.
> + * SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp
> + * SCALE_NONE: Do not use this scaling type.
> + */
> +enum vadc_scale_fn_type {
> + SCALE_DEFAULT = 0,
> + SCALE_THERM_100K_PULLUP,
> + SCALE_PMIC_THERM,
> + SCALE_XOTHERM,
> + SCALE_PMI_CHG_TEMP,
> + SCALE_NONE,
> +};
> +
> static const struct vadc_prescale_ratio vadc_prescale_ratios[] = {
> {.num = 1, .den = 1},
> {.num = 1, .den = 3},
> @@ -197,6 +246,44 @@ struct vadc_priv {
> {.num = 1, .den = 10}
> };
>
> +/* Voltage to temperature */
> +static const struct vadc_map_pt adcmap_100k_104ef_104fb[] = {
> + {1758, -40},
> + {1742, -35},
> + {1719, -30},
> + {1691, -25},
> + {1654, -20},
> + {1608, -15},
> + {1551, -10},
> + {1483, -5},
> + {1404, 0},
> + {1315, 5},
> + {1218, 10},
> + {1114, 15},
> + {1007, 20},
> + {900, 25},
> + {795, 30},
> + {696, 35},
> + {605, 40},
> + {522, 45},
> + {448, 50},
> + {383, 55},
> + {327, 60},
> + {278, 65},
> + {237, 70},
> + {202, 75},
> + {172, 80},
> + {146, 85},
> + {125, 90},
> + {107, 95},
> + {92, 100},
> + {79, 105},
> + {68, 110},
> + {59, 115},
> + {51, 120},
> + {44, 125}
> +};
> +
> static int vadc_read(struct vadc_priv *vadc, u16 offset, u8 *data)
> {
> return regmap_bulk_read(vadc->regmap, vadc->base + offset, data, 1);
> @@ -418,7 +505,7 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
> u16 read_1, read_2;
> int ret;
>
> - vadc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE_UV;
> + vadc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE;
> vadc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV;
>
> prop = vadc_get_channel(vadc, VADC_REF_1250MV);
> @@ -468,6 +555,51 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
> return ret;
> }
>
> +static int vadc_map_voltage_temp(const struct vadc_map_pt *pts,
> + u32 tablesize, s32 input, s64 *output)
> +{
> + bool descending = 1;
> + u32 i = 0;
> +
> + if (!pts)
> + return -EINVAL;
> +
> + /* Check if table is descending or ascending */
> + if (tablesize > 1) {
> + if (pts[0].x < pts[1].x)
> + descending = 0;
> + }
> +
> + while (i < tablesize) {
> + if ((descending) && (pts[i].x < input)) {
> + /* table entry is less than measured*/
> + /* value and table is descending, stop */
> + break;
> + } else if ((!descending) &&
> + (pts[i].x > input)) {
> + /* table entry is greater than measured*/
> + /*value and table is ascending, stop */
> + break;
> + }
> + i++;
> + }
> +
> + if (i == 0) {
> + *output = pts[0].y;
> + } else if (i == tablesize) {
> + *output = pts[tablesize - 1].y;
> + } else {
> + /* result is between search_index and search_index-1 */
> + /* interpolate linearly */
> + *output = (((s32)((pts[i].y - pts[i - 1].y) *
> + (input - pts[i - 1].x)) /
> + (pts[i].x - pts[i - 1].x)) +
> + pts[i - 1].y);
> + }
> +
> + return 0;
> +}
> +
> static void vadc_scale_calib(struct vadc_priv *vadc, u16 adc_code,
> const struct vadc_channel_prop *prop,
> s64 *scale_voltage)
> @@ -502,6 +634,77 @@ static int vadc_scale_volt(struct vadc_priv *vadc,
> return 0;
> }
>
> +static int vadc_scale_therm(struct vadc_priv *vadc,
> + const struct vadc_channel_prop *prop, u16 adc_code,
> + int *result_mdec)
> +{
> + s64 voltage = 0, result = 0;
> +
> + vadc_scale_calib(vadc, adc_code, prop, &voltage);
> +
> + if (prop->calibration == VADC_CALIB_ABSOLUTE)
> + voltage /= 1000;
> +
> + vadc_map_voltage_temp(adcmap_100k_104ef_104fb,
> + ARRAY_SIZE(adcmap_100k_104ef_104fb),
> + voltage, &result);
> + result *= 1000;
> + *result_mdec = result;
> +
> + return 0;
> +}
> +
> +static int vadc_scale_die_temp(struct vadc_priv *vadc,
> + const struct vadc_channel_prop *prop,
> + u16 adc_code, int *result_mdec)
> +{
> + const struct vadc_prescale_ratio *prescale;
> + s64 voltage = 0;
> +
> + vadc_scale_calib(vadc, adc_code, prop, &voltage);
> +
> + if (voltage > 0) {
> + prescale = &vadc_prescale_ratios[prop->prescale];
> + voltage = voltage * prescale->den;
> + voltage /= (prescale->num * 2);
> + } else {
> + voltage = 0;
> + }
> +
> + voltage -= KELVINMIL_CELSIUSMIL;
> + *result_mdec = voltage;
> +
> + return 0;
> +}
> +
> +static int vadc_scale_chg_temp(struct vadc_priv *vadc,
> + const struct vadc_channel_prop *prop,
> + u16 adc_code, int *result_mdec)
> +{
> + const struct vadc_prescale_ratio *prescale;
> + s64 voltage = 0, result = 0;
> +
> + vadc_scale_calib(vadc, adc_code, prop, &voltage);
> +
> + prescale = &vadc_prescale_ratios[prop->prescale];
> + voltage = voltage * prescale->den;
> + voltage = div64_s64(voltage, prescale->num);
> + voltage = ((PMI_CHG_SCALE_1) * (voltage * 2));
> + voltage = (voltage + PMI_CHG_SCALE_2);
> + result = div64_s64(voltage, 1000000);
> + *result_mdec = result;
> +
> + return 0;
> +}
> +
> +static int vadc_scale(struct vadc_priv *vadc,
> + const struct vadc_channel_prop *prop, u16 adc_code,
> + int *scale)
> +{
> + dev_err(vadc->dev, "Need a scale function\n");
> + return 0;
> +}
> +
> static int vadc_decimation_from_dt(u32 value)
> {
> if (!is_power_of_2(value) || value < VADC_DECIMATION_MIN ||
> @@ -547,6 +750,15 @@ static int vadc_avg_samples_from_dt(u32 value)
> return __ffs64(value);
> }
>
> +static struct vadc_scale_fn scale_fn[] = {
> + [SCALE_DEFAULT] = {vadc_scale_volt},
> + [SCALE_THERM_100K_PULLUP] = {vadc_scale_therm},
> + [SCALE_PMIC_THERM] = {vadc_scale_die_temp},
> + [SCALE_XOTHERM] = {vadc_scale_therm},
> + [SCALE_PMI_CHG_TEMP] = {vadc_scale_chg_temp},
> + [SCALE_NONE] = {vadc_scale},
> +};
> +
> static int vadc_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan, int *val, int *val2,
> long mask)
> @@ -563,7 +775,7 @@ static int vadc_read_raw(struct iio_dev *indio_dev,
> if (ret)
> break;
>
> - vadc_scale_volt(vadc, prop, adc_code, val);
> + scale_fn[prop->scale_fn].scale(vadc, prop, adc_code, val);
>
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_RAW:
> @@ -606,23 +818,27 @@ struct vadc_channels {
> unsigned int prescale_index;
> enum iio_chan_type type;
> long info_mask;
> + unsigned int scale_fn;
> };
>
> -#define VADC_CHAN(_dname, _type, _mask, _pre) \
> +#define VADC_CHAN(_dname, _type, _mask, _pre, _scale) \
> [VADC_##_dname] = { \
> .datasheet_name = __stringify(_dname), \
> .prescale_index = _pre, \
> .type = _type, \
> - .info_mask = _mask \
> + .info_mask = _mask, \
> + .scale_fn = _scale \
> }, \
>
> -#define VADC_CHAN_TEMP(_dname, _pre) \
> - VADC_CHAN(_dname, IIO_TEMP, BIT(IIO_CHAN_INFO_PROCESSED), _pre) \
> +#define VADC_CHAN_TEMP(_dname, _pre, _scale) \
> + VADC_CHAN(_dname, IIO_TEMP, \
> + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_PROCESSED), \
> + _pre, _scale) \
>
> -#define VADC_CHAN_VOLT(_dname, _pre) \
> +#define VADC_CHAN_VOLT(_dname, _pre, _scale) \
> VADC_CHAN(_dname, IIO_VOLTAGE, \
> BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_PROCESSED),\
> - _pre) \
> + _pre, _scale) \
In the SCALE_NONE case you are still creating the sysfs attributes to provide
processed. Just have a variant of this macro that doesn't do this.
That way we don't end up with a sysfs attribute that always results in
an error!
#define VADC_CHAN_VOLT_NO_KNOWN_SCALEE(_dname, _pre) \
VADC_CHAN(_dname, IIO_VOLTAGE, BIT(IIO_CHAN_INFO_RAW), _pre);
>
> /*
> * The array represents all possible ADC channels found in the supported PMICs.
> @@ -630,106 +846,106 @@ struct vadc_channels {
> * gaps in the array should be treated as reserved channels.
> */
> static const struct vadc_channels vadc_chans[] = {
> - VADC_CHAN_VOLT(USBIN, 4)
> - VADC_CHAN_VOLT(DCIN, 4)
> - VADC_CHAN_VOLT(VCHG_SNS, 3)
> - VADC_CHAN_VOLT(SPARE1_03, 1)
> - VADC_CHAN_VOLT(USB_ID_MV, 1)
> - VADC_CHAN_VOLT(VCOIN, 1)
> - VADC_CHAN_VOLT(VBAT_SNS, 1)
> - VADC_CHAN_VOLT(VSYS, 1)
> - VADC_CHAN_TEMP(DIE_TEMP, 0)
> - VADC_CHAN_VOLT(REF_625MV, 0)
> - VADC_CHAN_VOLT(REF_1250MV, 0)
> - VADC_CHAN_VOLT(CHG_TEMP, 0)
> - VADC_CHAN_VOLT(SPARE1, 0)
> - VADC_CHAN_VOLT(SPARE2, 0)
> - VADC_CHAN_VOLT(GND_REF, 0)
> - VADC_CHAN_VOLT(VDD_VADC, 0)
> -
> - VADC_CHAN_VOLT(P_MUX1_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX2_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX3_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX4_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX5_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX6_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX7_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX8_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX9_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX10_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX11_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX12_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX13_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX14_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX15_1_1, 0)
> - VADC_CHAN_VOLT(P_MUX16_1_1, 0)
> -
> - VADC_CHAN_VOLT(P_MUX1_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX2_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX3_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX4_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX5_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX6_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX7_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX8_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX9_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX10_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX11_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX12_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX13_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX14_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX15_1_3, 1)
> - VADC_CHAN_VOLT(P_MUX16_1_3, 1)
> -
> - VADC_CHAN_VOLT(LR_MUX1_BAT_THERM, 0)
> - VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX3_XO_THERM, 0)
> - VADC_CHAN_VOLT(LR_MUX4_AMUX_THM1, 0)
> - VADC_CHAN_VOLT(LR_MUX5_AMUX_THM2, 0)
> - VADC_CHAN_VOLT(LR_MUX6_AMUX_THM3, 0)
> - VADC_CHAN_VOLT(LR_MUX7_HW_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX8_AMUX_THM4, 0)
> - VADC_CHAN_VOLT(LR_MUX9_AMUX_THM5, 0)
> - VADC_CHAN_VOLT(LR_MUX10_USB_ID, 0)
> - VADC_CHAN_VOLT(AMUX_PU1, 0)
> - VADC_CHAN_VOLT(AMUX_PU2, 0)
> - VADC_CHAN_VOLT(LR_MUX3_BUF_XO_THERM, 0)
> -
> - VADC_CHAN_VOLT(LR_MUX1_PU1_BAT_THERM, 0)
> - VADC_CHAN_VOLT(LR_MUX2_PU1_BAT_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX3_PU1_XO_THERM, 0)
> - VADC_CHAN_VOLT(LR_MUX4_PU1_AMUX_THM1, 0)
> - VADC_CHAN_VOLT(LR_MUX5_PU1_AMUX_THM2, 0)
> - VADC_CHAN_VOLT(LR_MUX6_PU1_AMUX_THM3, 0)
> - VADC_CHAN_VOLT(LR_MUX7_PU1_AMUX_HW_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX8_PU1_AMUX_THM4, 0)
> - VADC_CHAN_VOLT(LR_MUX9_PU1_AMUX_THM5, 0)
> - VADC_CHAN_VOLT(LR_MUX10_PU1_AMUX_USB_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX3_BUF_PU1_XO_THERM, 0)
> -
> - VADC_CHAN_VOLT(LR_MUX1_PU2_BAT_THERM, 0)
> - VADC_CHAN_VOLT(LR_MUX2_PU2_BAT_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX3_PU2_XO_THERM, 0)
> - VADC_CHAN_VOLT(LR_MUX4_PU2_AMUX_THM1, 0)
> - VADC_CHAN_VOLT(LR_MUX5_PU2_AMUX_THM2, 0)
> - VADC_CHAN_VOLT(LR_MUX6_PU2_AMUX_THM3, 0)
> - VADC_CHAN_VOLT(LR_MUX7_PU2_AMUX_HW_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX8_PU2_AMUX_THM4, 0)
- VADC_CHAN_VOLT(LR_MUX9_PU2_AMUX_THM5, 0)
> - VADC_CHAN_VOLT(LR_MUX10_PU2_AMUX_USB_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX3_BUF_PU2_XO_THERM, 0)
> -
> - VADC_CHAN_VOLT(LR_MUX1_PU1_PU2_BAT_THERM, 0)
> - VADC_CHAN_VOLT(LR_MUX2_PU1_PU2_BAT_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX3_PU1_PU2_XO_THERM, 0)
> - VADC_CHAN_VOLT(LR_MUX4_PU1_PU2_AMUX_THM1, 0)
> - VADC_CHAN_VOLT(LR_MUX5_PU1_PU2_AMUX_THM2, 0)
> - VADC_CHAN_VOLT(LR_MUX6_PU1_PU2_AMUX_THM3, 0)
> - VADC_CHAN_VOLT(LR_MUX7_PU1_PU2_AMUX_HW_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX8_PU1_PU2_AMUX_THM4, 0)
> - VADC_CHAN_VOLT(LR_MUX9_PU1_PU2_AMUX_THM5, 0)
> - VADC_CHAN_VOLT(LR_MUX10_PU1_PU2_AMUX_USB_ID, 0)
> - VADC_CHAN_VOLT(LR_MUX3_BUF_PU1_PU2_XO_THERM, 0)
> + VADC_CHAN_VOLT(USBIN, 4, SCALE_DEFAULT)
> + VADC_CHAN_VOLT(DCIN, 4, SCALE_DEFAULT)
> + VADC_CHAN_VOLT(VCHG_SNS, 3, SCALE_NONE)
> + VADC_CHAN_VOLT(SPARE1_03, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(USB_ID_MV, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(VCOIN, 1, SCALE_DEFAULT)
> + VADC_CHAN_VOLT(VBAT_SNS, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(VSYS, 1, SCALE_DEFAULT)
> + VADC_CHAN_TEMP(DIE_TEMP, 0, SCALE_PMIC_THERM)
> + VADC_CHAN_VOLT(REF_625MV, 0, SCALE_DEFAULT)
> + VADC_CHAN_VOLT(REF_1250MV, 0, SCALE_DEFAULT)
> + VADC_CHAN_VOLT(CHG_TEMP, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(SPARE1, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(SPARE2, 0, SCALE_PMI_CHG_TEMP)
> + VADC_CHAN_VOLT(GND_REF, 0, SCALE_DEFAULT)
> + VADC_CHAN_VOLT(VDD_VADC, 0, SCALE_DEFAULT)
> +
> + VADC_CHAN_VOLT(P_MUX1_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX2_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX3_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX4_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX5_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX6_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX7_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX8_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX9_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX10_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX11_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX12_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX13_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX14_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX15_1_1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX16_1_1, 0, SCALE_NONE)
> +
> + VADC_CHAN_VOLT(P_MUX1_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX2_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX3_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX4_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX5_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX6_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX7_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX8_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX9_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX10_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX11_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX12_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX13_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX14_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX15_1_3, 1, SCALE_NONE)
> + VADC_CHAN_VOLT(P_MUX16_1_3, 1, SCALE_NONE)
> +
> + VADC_CHAN_VOLT(LR_MUX1_BAT_THERM, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX3_XO_THERM, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX4_AMUX_THM1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX5_AMUX_THM2, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX6_AMUX_THM3, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX7_HW_ID, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX8_AMUX_THM4, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX9_AMUX_THM5, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX10_USB_ID, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(AMUX_PU1, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(AMUX_PU2, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX3_BUF_XO_THERM, 0, SCALE_NONE)
> +
> + VADC_CHAN_TEMP(LR_MUX1_PU1_BAT_THERM, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX2_PU1_BAT_ID, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX3_PU1_XO_THERM, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX4_PU1_AMUX_THM1, 0, SCALE_THERM_100K_PULLUP)
> + VADC_CHAN_TEMP(LR_MUX5_PU1_AMUX_THM2, 0, SCALE_THERM_100K_PULLUP)
> + VADC_CHAN_TEMP(LR_MUX6_PU1_AMUX_THM3, 0, SCALE_THERM_100K_PULLUP)
> + VADC_CHAN_VOLT(LR_MUX7_PU1_AMUX_HW_ID, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX8_PU1_AMUX_THM4, 0, SCALE_THERM_100K_PULLUP)
> + VADC_CHAN_TEMP(LR_MUX9_PU1_AMUX_THM5, 0, SCALE_THERM_100K_PULLUP)
> + VADC_CHAN_VOLT(LR_MUX10_PU1_AMUX_USB_ID, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX3_BUF_PU1_XO_THERM, 0, SCALE_XOTHERM)
> +
> + VADC_CHAN_TEMP(LR_MUX1_PU2_BAT_THERM, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX2_PU2_BAT_ID, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX3_PU2_XO_THERM, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX4_PU2_AMUX_THM1, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX5_PU2_AMUX_THM2, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX6_PU2_AMUX_THM3, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX7_PU2_AMUX_HW_ID, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX8_PU2_AMUX_THM4, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX9_PU2_AMUX_THM5, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX10_PU2_AMUX_USB_ID, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX3_BUF_PU2_XO_THERM, 0, SCALE_NONE)
> +
> + VADC_CHAN_TEMP(LR_MUX1_PU1_PU2_BAT_THERM, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX2_PU1_PU2_BAT_ID, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX3_PU1_PU2_XO_THERM, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX4_PU1_PU2_AMUX_THM1, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX5_PU1_PU2_AMUX_THM2, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX6_PU1_PU2_AMUX_THM3, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX7_PU1_PU2_AMUX_HW_ID, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX8_PU1_PU2_AMUX_THM4, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX9_PU1_PU2_AMUX_THM5, 0, SCALE_NONE)
> + VADC_CHAN_VOLT(LR_MUX10_PU1_PU2_AMUX_USB_ID, 0, SCALE_NONE)
> + VADC_CHAN_TEMP(LR_MUX3_BUF_PU1_PU2_XO_THERM, 0, SCALE_NONE)
> };
>
> static int vadc_get_dt_channel_data(struct device *dev,
> @@ -848,6 +1064,7 @@ static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
> return ret;
> }
>
> + prop.scale_fn = vadc_chans[prop.channel].scale_fn;
> vadc->chan_props[index] = prop;
>
> vadc_chan = &vadc_chans[prop.channel];
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
