There are two separate files describing the tsl2583 sysfs attributes. Combine the two files into one. Updated the name of the sysfs attributes to match the current ABI. Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> Suggested-by: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx> --- .../Documentation/light/sysfs-bus-iio-light-tsl2583 | 16 +++++++++++++++- .../iio/Documentation/sysfs-bus-iio-light-tsl2583 | 20 -------------------- 2 files changed, 15 insertions(+), 21 deletions(-) delete mode 100644 drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 index 470f7ad..a2e1996 100644 --- a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 +++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 @@ -1,6 +1,20 @@ -What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate +What: /sys/bus/iio/devices/device[n]/in_illuminance_calibrate KernelVersion: 2.6.37 Contact: linux-iio@xxxxxxxxxxxxxxx Description: This property causes an internal calibration of the als gain trim value which is later used in calculating illuminance in lux. + +What: /sys/bus/iio/devices/device[n]/in_illuminance_lux_table +KernelVersion: 2.6.37 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + This property gets/sets the table of coefficients + used in calculating illuminance in lux. + +What: /sys/bus/iio/devices/device[n]/in_illuminance_input_target +KernelVersion: 2.6.37 +Contact: linux-iio@xxxxxxxxxxxxxxx +Description: + This property is the known externally illuminance (in lux). + It is used in the process of calibrating the device accuracy. diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 deleted file mode 100644 index 660781d..0000000 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583 +++ /dev/null @@ -1,20 +0,0 @@ -What: /sys/bus/iio/devices/device[n]/lux_table -KernelVersion: 2.6.37 -Contact: linux-iio@xxxxxxxxxxxxxxx -Description: - This property gets/sets the table of coefficients - used in calculating illuminance in lux. - -What: /sys/bus/iio/devices/device[n]/illuminance0_calibrate -KernelVersion: 2.6.37 -Contact: linux-iio@xxxxxxxxxxxxxxx -Description: - This property causes an internal calibration of the als gain trim - value which is later used in calculating illuminance in lux. - -What: /sys/bus/iio/devices/device[n]/illuminance0_input_target -KernelVersion: 2.6.37 -Contact: linux-iio@xxxxxxxxxxxxxxx -Description: - This property is the known externally illuminance (in lux). - It is used in the process of calibrating the device accuracy. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
