[PATCH v3 28/28] staging: iio: tsl2583: move out of staging

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move tsl2580, tsl2581, tsl2583 driver out of staging into mainline.

Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
 .../ABI/testing/sysfs-bus-iio-light-tsl2583        |  20 +
 drivers/iio/light/Kconfig                          |   7 +
 drivers/iio/light/Makefile                         |   1 +
 drivers/iio/light/tsl2583.c                        | 909 +++++++++++++++++++++
 .../light/sysfs-bus-iio-light-tsl2583              |  20 -
 drivers/staging/iio/light/Kconfig                  |   7 -
 drivers/staging/iio/light/Makefile                 |   1 -
 drivers/staging/iio/light/tsl2583.c                | 909 ---------------------
 8 files changed, 937 insertions(+), 937 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
 create mode 100644 drivers/iio/light/tsl2583.c
 delete mode 100644 drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
 delete mode 100644 drivers/staging/iio/light/tsl2583.c

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583 b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
new file mode 100644
index 0000000..a2e1996
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583
@@ -0,0 +1,20 @@
+What:		/sys/bus/iio/devices/device[n]/in_illuminance_calibrate
+KernelVersion:	2.6.37
+Contact:	linux-iio@xxxxxxxxxxxxxxx
+Description:
+		This property causes an internal calibration of the als gain trim
+		value which is later used in calculating illuminance in lux.
+
+What:		/sys/bus/iio/devices/device[n]/in_illuminance_lux_table
+KernelVersion:	2.6.37
+Contact:	linux-iio@xxxxxxxxxxxxxxx
+Description:
+		This property gets/sets the table of coefficients
+		used in calculating illuminance in lux.
+
+What:		/sys/bus/iio/devices/device[n]/in_illuminance_input_target
+KernelVersion:	2.6.37
+Contact:	linux-iio@xxxxxxxxxxxxxxx
+Description:
+		This property is the known externally illuminance (in lux).
+		It is used in the process of calibrating the device accuracy.
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index d011720..298ea50 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -338,6 +338,13 @@ config SENSORS_TSL2563
 	 This driver can also be built as a module.  If so, the module
 	 will be called tsl2563.
 
+config TSL2583
+	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
+	depends on I2C
+	help
+	 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
+	 Access ALS data via iio, sysfs.
+
 config TSL4531
 	tristate "TAOS TSL4531 ambient light sensors"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 15f24c5..4de5200 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_SI1145)		+= si1145.o
 obj-$(CONFIG_STK3310)          += stk3310.o
 obj-$(CONFIG_TCS3414)		+= tcs3414.o
 obj-$(CONFIG_TCS3472)		+= tcs3472.o
+obj-$(CONFIG_TSL2583)		+= tsl2583.o
 obj-$(CONFIG_TSL4531)		+= tsl4531.o
 obj-$(CONFIG_US5182D)		+= us5182d.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
diff --git a/drivers/iio/light/tsl2583.c b/drivers/iio/light/tsl2583.c
new file mode 100644
index 0000000..b6da79b
--- /dev/null
+++ b/drivers/iio/light/tsl2583.c
@@ -0,0 +1,909 @@
+/*
+ * Device driver for monitoring ambient light intensity (lux)
+ * within the TAOS tsl258x family of devices (tsl2580, tsl2581, tsl2583).
+ *
+ * Copyright (c) 2011, TAOS Corporation.
+ * Copyright (c) 2016 Brian Masney <masneyb@xxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/mutex.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* Device Registers and Masks */
+#define TSL2583_CNTRL			0x00
+#define TSL2583_ALS_TIME		0X01
+#define TSL2583_INTERRUPT		0x02
+#define TSL2583_GAIN			0x07
+#define TSL2583_REVID			0x11
+#define TSL2583_CHIPID			0x12
+#define TSL2583_ALS_CHAN0LO		0x14
+#define TSL2583_ALS_CHAN0HI		0x15
+#define TSL2583_ALS_CHAN1LO		0x16
+#define TSL2583_ALS_CHAN1HI		0x17
+#define TSL2583_TMR_LO			0x18
+#define TSL2583_TMR_HI			0x19
+
+/* tsl2583 cmd reg masks */
+#define TSL2583_CMD_REG			0x80
+#define TSL2583_CMD_SPL_FN		0x60
+#define TSL2583_CMD_ALS_INT_CLR		0x01
+
+/* tsl2583 cntrl reg masks */
+#define TSL2583_CNTL_ADC_ENBL		0x02
+#define TSL2583_CNTL_PWR_OFF		0x00
+#define TSL2583_CNTL_PWR_ON		0x01
+
+/* tsl2583 status reg masks */
+#define TSL2583_STA_ADC_VALID		0x01
+#define TSL2583_STA_ADC_INTR		0x10
+
+/* Lux calculation constants */
+#define	TSL2583_LUX_CALC_OVER_FLOW	65535
+
+#define TSL2583_INTERRUPT_DISABLED	0x00
+
+#define TSL2583_CHIP_ID			0x90
+#define TSL2583_CHIP_ID_MASK		0xf0
+
+/* Per-device data */
+struct tsl2583_als_info {
+	u16 als_ch0;
+	u16 als_ch1;
+	u16 lux;
+};
+
+struct tsl2583_lux {
+	unsigned int ratio;
+	unsigned int ch0;
+	unsigned int ch1;
+};
+
+static const struct tsl2583_lux tsl2583_default_lux[] = {
+	{  9830,  8520, 15729 },
+	{ 12452, 10807, 23344 },
+	{ 14746,  6383, 11705 },
+	{ 17695,  4063,  6554 },
+	{     0,     0,     0 }  /* Termination segment */
+};
+
+#define TSL2583_MAX_LUX_TABLE_ENTRIES 11
+
+struct tsl2583_settings {
+	int als_time;
+	int als_gain;
+	int als_gain_trim;
+	int als_cal_target;
+
+	/*
+	 * This structure is intentionally large to accommodate updates via
+	 * sysfs. Sized to 11 = max 10 segments + 1 termination segment.
+	 * Assumption is that one and only one type of glass used.
+	 */
+	struct tsl2583_lux als_device_lux[TSL2583_MAX_LUX_TABLE_ENTRIES];
+};
+
+struct tsl2583_chip {
+	struct mutex als_mutex;
+	struct i2c_client *client;
+	struct tsl2583_als_info als_cur_info;
+	struct tsl2583_settings als_settings;
+	int als_time_scale;
+	int als_saturation;
+	bool suspended;
+};
+
+struct gainadj {
+	s16 ch0;
+	s16 ch1;
+	s16 mean;
+};
+
+/* Index = (0 - 3) Used to validate the gain selection index */
+static const struct gainadj gainadj[] = {
+	{ 1, 1, 1 },
+	{ 8, 8, 8 },
+	{ 16, 16, 16 },
+	{ 107, 115, 111 }
+};
+
+/*
+ * Provides initial operational parameter defaults.
+ * These defaults may be changed through the device's sysfs files.
+ */
+static void tsl2583_defaults(struct tsl2583_chip *chip)
+{
+	/*
+	 * The integration time must be a multiple of 50ms and within the
+	 * range [50, 600] ms.
+	 */
+	chip->als_settings.als_time = 100;
+
+	/*
+	 * This is an index into the gainadj table. Assume clear glass as the
+	 * default.
+	 */
+	chip->als_settings.als_gain = 0;
+
+	/* Default gain trim to account for aperture effects */
+	chip->als_settings.als_gain_trim = 1000;
+
+	/* Known external ALS reading used for calibration */
+	chip->als_settings.als_cal_target = 130;
+
+	/* Default lux table. */
+	memcpy(chip->als_settings.als_device_lux, tsl2583_default_lux,
+	       sizeof(tsl2583_default_lux));
+}
+
+/*
+ * Reads and calculates current lux value.
+ * The raw ch0 and ch1 values of the ambient light sensed in the last
+ * integration cycle are read from the device.
+ * Time scale factor array values are adjusted based on the integration time.
+ * The raw values are multiplied by a scale factor, and device gain is obtained
+ * using gain index. Limit checks are done next, then the ratio of a multiple
+ * of ch1 value, to the ch0 value, is calculated. The array als_device_lux[]
+ * declared above is then scanned to find the first ratio value that is just
+ * above the ratio we just calculated. The ch0 and ch1 multiplier constants in
+ * the array are then used along with the time scale factor array values, to
+ * calculate the lux.
+ */
+static int tsl2583_get_lux(struct iio_dev *indio_dev)
+{
+	u16 ch0, ch1; /* separated ch0/ch1 data from device */
+	u32 lux; /* raw lux calculated from device data */
+	u64 lux64;
+	u32 ratio;
+	u8 buf[5];
+	struct tsl2583_lux *p;
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int i, ret;
+
+	ret = i2c_smbus_read_byte_data(chip->client, TSL2583_CMD_REG);
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "%s: failed to read CMD_REG register\n",
+			__func__);
+		goto done;
+	}
+
+	/* is data new & valid */
+	if (!(ret & TSL2583_STA_ADC_INTR)) {
+		dev_err(&chip->client->dev, "%s: data not valid; returning last value\n",
+			__func__);
+		ret = chip->als_cur_info.lux; /* return LAST VALUE */
+		goto done;
+	}
+
+	for (i = 0; i < 4; i++) {
+		int reg = TSL2583_CMD_REG | (TSL2583_ALS_CHAN0LO + i);
+
+		ret = i2c_smbus_read_byte_data(chip->client, reg);
+		if (ret < 0) {
+			dev_err(&chip->client->dev, "%s: failed to read register %x\n",
+				__func__, reg);
+			goto done;
+		}
+		buf[i] = ret;
+	}
+
+	/*
+	 * Clear the pending interrupt status bit on the chip to allow the next
+	 * integration cycle to start. This has to be done even though this
+	 * driver currently does not support interrupts.
+	 */
+	ret = i2c_smbus_write_byte(chip->client,
+				   (TSL2583_CMD_REG | TSL2583_CMD_SPL_FN |
+				    TSL2583_CMD_ALS_INT_CLR));
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "%s: failed to clear the interrupt bit\n",
+			__func__);
+		goto done; /* have no data, so return failure */
+	}
+
+	/* extract ALS/lux data */
+	ch0 = le16_to_cpup((const __le16 *)&buf[0]);
+	ch1 = le16_to_cpup((const __le16 *)&buf[2]);
+
+	chip->als_cur_info.als_ch0 = ch0;
+	chip->als_cur_info.als_ch1 = ch1;
+
+	if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation))
+		goto return_max;
+
+	if (!ch0) {
+		/* have no data, so return 0 */
+		ret = 0;
+		chip->als_cur_info.lux = 0;
+		goto done;
+	}
+
+	/* calculate ratio */
+	ratio = (ch1 << 15) / ch0;
+
+	/* convert to unscaled lux using the pointer to the table */
+	for (p = (struct tsl2583_lux *)chip->als_settings.als_device_lux;
+	     p->ratio != 0 && p->ratio < ratio; p++)
+		;
+
+	if (p->ratio == 0) {
+		lux = 0;
+	} else {
+		u32 ch0lux, ch1lux;
+
+		ch0lux = ((ch0 * p->ch0) +
+			  (gainadj[chip->als_settings.als_gain].ch0 >> 1))
+			 / gainadj[chip->als_settings.als_gain].ch0;
+		ch1lux = ((ch1 * p->ch1) +
+			  (gainadj[chip->als_settings.als_gain].ch1 >> 1))
+			 / gainadj[chip->als_settings.als_gain].ch1;
+
+		/* note: lux is 31 bit max at this point */
+		if (ch1lux > ch0lux) {
+			dev_dbg(&chip->client->dev, "%s: No Data - Returning 0\n",
+				__func__);
+			ret = 0;
+			chip->als_cur_info.lux = 0;
+			goto done;
+		}
+
+		lux = ch0lux - ch1lux;
+	}
+
+	/* adjust for active time scale */
+	if (chip->als_time_scale == 0)
+		lux = 0;
+	else
+		lux = (lux + (chip->als_time_scale >> 1)) /
+			chip->als_time_scale;
+
+	/*
+	 * Adjust for active gain scale.
+	 * The tsl2583_default_lux tables above have a factor of 8192 built in,
+	 * so we need to shift right.
+	 * User-specified gain provides a multiplier.
+	 * Apply user-specified gain before shifting right to retain precision.
+	 * Use 64 bits to avoid overflow on multiplication.
+	 * Then go back to 32 bits before division to avoid using div_u64().
+	 */
+	lux64 = lux;
+	lux64 = lux64 * chip->als_settings.als_gain_trim;
+	lux64 >>= 13;
+	lux = lux64;
+	lux = (lux + 500) / 1000;
+
+	if (lux > TSL2583_LUX_CALC_OVER_FLOW) { /* check for overflow */
+return_max:
+		lux = TSL2583_LUX_CALC_OVER_FLOW;
+	}
+
+	/* Update the structure with the latest VALID lux. */
+	chip->als_cur_info.lux = lux;
+	ret = lux;
+
+done:
+	return ret;
+}
+
+/*
+ * Obtain single reading and calculate the als_gain_trim (later used
+ * to derive actual lux).
+ * Return updated gain_trim value.
+ */
+static int tsl2583_als_calibrate(struct iio_dev *indio_dev)
+{
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	unsigned int gain_trim_val;
+	int ret;
+	int lux_val;
+
+	ret = i2c_smbus_read_byte_data(chip->client,
+				       TSL2583_CMD_REG | TSL2583_CNTRL);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed to read from the CNTRL register\n",
+			__func__);
+		return ret;
+	}
+
+	if ((ret & (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON))
+			!= (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON)) {
+		dev_err(&chip->client->dev,
+			"%s: Device is not powered on and/or ADC is not enabled\n",
+			__func__);
+		return -EINVAL;
+	} else if ((ret & TSL2583_STA_ADC_VALID) != TSL2583_STA_ADC_VALID) {
+		dev_err(&chip->client->dev,
+			"%s: The two ADC channels have not completed an integration cycle\n",
+			__func__);
+		return -ENODATA;
+	}
+
+	lux_val = tsl2583_get_lux(indio_dev);
+	if (lux_val < 0) {
+		dev_err(&chip->client->dev, "%s: failed to get lux\n",
+			__func__);
+		return lux_val;
+	}
+
+	gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target)
+			* chip->als_settings.als_gain_trim) / lux_val);
+	if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
+		dev_err(&chip->client->dev,
+			"%s: trim_val of %d is not within the range [250, 4000]\n",
+			__func__, gain_trim_val);
+		return -ENODATA;
+	}
+
+	chip->als_settings.als_gain_trim = (int)gain_trim_val;
+
+	return 0;
+}
+
+static int tsl2583_set_als_time(struct tsl2583_chip *chip)
+{
+	int als_count, als_time, ret;
+	u8 val;
+
+	/* determine als integration register */
+	als_count = (chip->als_settings.als_time * 100 + 135) / 270;
+	if (!als_count)
+		als_count = 1; /* ensure at least one cycle */
+
+	/* convert back to time (encompasses overrides) */
+	als_time = (als_count * 27 + 5) / 10;
+
+	val = 256 - als_count;
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2583_CMD_REG | TSL2583_ALS_TIME,
+					val);
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "%s: failed to set the als time to %d\n",
+			__func__, val);
+		return ret;
+	}
+
+	/* set chip struct re scaling and saturation */
+	chip->als_saturation = als_count * 922; /* 90% of full scale */
+	chip->als_time_scale = (als_time + 25) / 50;
+
+	return ret;
+}
+
+static int tsl2583_set_als_gain(struct tsl2583_chip *chip)
+{
+	int ret;
+
+	/* Set the gain based on als_settings struct */
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2583_CMD_REG | TSL2583_GAIN,
+					chip->als_settings.als_gain);
+	if (ret < 0)
+		dev_err(&chip->client->dev,
+			"%s: failed to set the gain to %d\n", __func__,
+			chip->als_settings.als_gain);
+
+	return ret;
+}
+
+static int tsl2583_set_power_state(struct tsl2583_chip *chip, u8 state)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2583_CMD_REG | TSL2583_CNTRL, state);
+	if (ret < 0)
+		dev_err(&chip->client->dev,
+			"%s: failed to set the power state to %d\n", __func__,
+			state);
+
+	return ret;
+}
+
+/*
+ * Turn the device on.
+ * Configuration must be set before calling this function.
+ */
+static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev)
+{
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	/* Power on the device; ADC off. */
+	ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2583_CMD_REG | TSL2583_INTERRUPT,
+					TSL2583_INTERRUPT_DISABLED);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed to disable interrupts\n", __func__);
+		return ret;
+	}
+
+	ret = tsl2583_set_als_time(chip);
+	if (ret < 0)
+		return ret;
+
+	ret = tsl2583_set_als_gain(chip);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(3000, 3500);
+
+	ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON |
+					    TSL2583_CNTL_ADC_ENBL);
+	if (ret < 0)
+		return ret;
+
+	chip->suspended = false;
+
+	return ret;
+}
+
+/* Sysfs Interface Functions */
+
+static ssize_t in_illuminance_input_target_show(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->als_mutex);
+	ret = sprintf(buf, "%d\n", chip->als_settings.als_cal_target);
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static ssize_t in_illuminance_input_target_store(struct device *dev,
+						 struct device_attribute *attr,
+						 const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int value;
+
+	if (kstrtoint(buf, 0, &value) || !value)
+		return -EINVAL;
+
+	mutex_lock(&chip->als_mutex);
+	chip->als_settings.als_cal_target = value;
+	mutex_unlock(&chip->als_mutex);
+
+	return len;
+}
+
+static ssize_t in_illuminance_calibrate_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int value, ret;
+
+	if (kstrtoint(buf, 0, &value) || value != 1)
+		return -EINVAL;
+
+	mutex_lock(&chip->als_mutex);
+
+	if (chip->suspended) {
+		ret = -EBUSY;
+		goto done;
+	}
+
+	ret = tsl2583_als_calibrate(indio_dev);
+	if (ret < 0)
+		goto done;
+
+	ret = len;
+done:
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static ssize_t in_illuminance_lux_table_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	unsigned int i;
+	int offset = 0;
+
+	for (i = 0; i < ARRAY_SIZE(chip->als_settings.als_device_lux); i++) {
+		offset += sprintf(buf + offset, "%u,%u,%u,",
+				  chip->als_settings.als_device_lux[i].ratio,
+				  chip->als_settings.als_device_lux[i].ch0,
+				  chip->als_settings.als_device_lux[i].ch1);
+		if (chip->als_settings.als_device_lux[i].ratio == 0) {
+			/*
+			 * We just printed the first "0" entry.
+			 * Now get rid of the extra "," and break.
+			 */
+			offset--;
+			break;
+		}
+	}
+
+	offset += sprintf(buf + offset, "\n");
+
+	return offset;
+}
+
+static ssize_t in_illuminance_lux_table_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
+	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3];
+	int ret = -EINVAL;
+	unsigned int n;
+
+	mutex_lock(&chip->als_mutex);
+
+	get_options(buf, ARRAY_SIZE(value), value);
+
+	/*
+	 * We now have an array of ints starting at value[1], and
+	 * enumerated by value[0].
+	 * We expect each group of three ints is one table entry,
+	 * and the last table entry is all 0.
+	 */
+	n = value[0];
+	if ((n % 3) || n < 6 || n > max_ints) {
+		dev_err(dev,
+			"%s: The number of entries in the lux table must be a multiple of 3 and within the range [6, %d]\n",
+			__func__, max_ints);
+		goto done;
+	}
+	if ((value[n - 2] | value[n - 1] | value[n]) != 0) {
+		dev_err(dev, "%s: The last 3 entries in the lux table must be zeros.\n",
+			__func__);
+		goto done;
+	}
+
+	memcpy(chip->als_settings.als_device_lux, &value[1],
+	       value[0] * sizeof(unsigned int));
+
+	ret = len;
+
+done:
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static IIO_CONST_ATTR(in_illuminance_calibscale_available, "1 8 16 111");
+static IIO_CONST_ATTR(in_illuminance_integration_time_available,
+		      "0.000050 0.000100 0.000150 0.000200 0.000250 0.000300 0.000350 0.000400 0.000450 0.000500 0.000550 0.000600 0.000650");
+static IIO_DEVICE_ATTR_RW(in_illuminance_input_target, 0);
+static IIO_DEVICE_ATTR_WO(in_illuminance_calibrate, 0);
+static IIO_DEVICE_ATTR_RW(in_illuminance_lux_table, 0);
+
+static struct attribute *sysfs_attrs_ctrl[] = {
+	&iio_const_attr_in_illuminance_calibscale_available.dev_attr.attr,
+	&iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr,
+	&iio_dev_attr_in_illuminance_input_target.dev_attr.attr,
+	&iio_dev_attr_in_illuminance_calibrate.dev_attr.attr,
+	&iio_dev_attr_in_illuminance_lux_table.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tsl2583_attribute_group = {
+	.attrs = sysfs_attrs_ctrl,
+};
+
+static const struct iio_chan_spec tsl2583_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	},
+	{
+		.type = IIO_LIGHT,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	},
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_CALIBBIAS) |
+				      BIT(IIO_CHAN_INFO_CALIBSCALE) |
+				      BIT(IIO_CHAN_INFO_INT_TIME),
+	},
+};
+
+static int tsl2583_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	mutex_lock(&chip->als_mutex);
+
+	if (chip->suspended) {
+		ret = -EBUSY;
+		goto read_done;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (chan->type == IIO_LIGHT) {
+			ret = tsl2583_get_lux(indio_dev);
+			if (ret < 0)
+				goto read_done;
+
+			/*
+			 * From page 20 of the TSL2581, TSL2583 data
+			 * sheet (TAOS134 − MARCH 2011):
+			 *
+			 * One of the photodiodes (channel 0) is
+			 * sensitive to both visible and infrared light,
+			 * while the second photodiode (channel 1) is
+			 * sensitive primarily to infrared light.
+			 */
+			if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
+				*val = chip->als_cur_info.als_ch0;
+			else
+				*val = chip->als_cur_info.als_ch1;
+
+			ret = IIO_VAL_INT;
+		}
+		break;
+	case IIO_CHAN_INFO_PROCESSED:
+		if (chan->type == IIO_LIGHT) {
+			ret = tsl2583_get_lux(indio_dev);
+			if (ret < 0)
+				goto read_done;
+
+			*val = ret;
+			ret = IIO_VAL_INT;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (chan->type == IIO_LIGHT) {
+			*val = chip->als_settings.als_gain_trim;
+			ret = IIO_VAL_INT;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_LIGHT) {
+			*val = gainadj[chip->als_settings.als_gain].mean;
+			ret = IIO_VAL_INT;
+		}
+		break;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (chan->type == IIO_LIGHT) {
+			*val = 0;
+			*val2 = chip->als_settings.als_time;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+		}
+		break;
+	default:
+		break;
+	}
+
+read_done:
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static int tsl2583_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	mutex_lock(&chip->als_mutex);
+
+	if (chip->suspended) {
+		ret = -EBUSY;
+		goto write_done;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (chan->type == IIO_LIGHT) {
+			chip->als_settings.als_gain_trim = val;
+			ret = 0;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_LIGHT) {
+			unsigned int i;
+
+			for (i = 0; i < ARRAY_SIZE(gainadj); i++) {
+				if (gainadj[i].mean == val) {
+					chip->als_settings.als_gain = i;
+					ret = tsl2583_set_als_gain(chip);
+					break;
+				}
+			}
+		}
+		break;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (chan->type == IIO_LIGHT && !val && val2 >= 50 &&
+		    val2 <= 650 && !(val2 % 50)) {
+			chip->als_settings.als_time = val2;
+			ret = tsl2583_set_als_time(chip);
+		}
+		break;
+	default:
+		break;
+	}
+
+write_done:
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static const struct iio_info tsl2583_info = {
+	.attrs = &tsl2583_attribute_group,
+	.driver_module = THIS_MODULE,
+	.read_raw = tsl2583_read_raw,
+	.write_raw = tsl2583_write_raw,
+};
+
+static int tsl2583_probe(struct i2c_client *clientp,
+			 const struct i2c_device_id *idp)
+{
+	int ret;
+	struct tsl2583_chip *chip;
+	struct iio_dev *indio_dev;
+
+	if (!i2c_check_functionality(clientp->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&clientp->dev, "%s: i2c smbus byte data functionality is unsupported\n",
+			__func__);
+		return -EOPNOTSUPP;
+	}
+
+	indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+	chip->client = clientp;
+	i2c_set_clientdata(clientp, indio_dev);
+
+	mutex_init(&chip->als_mutex);
+	chip->suspended = true;
+
+	ret = i2c_smbus_read_byte_data(clientp,
+				       TSL2583_CMD_REG | TSL2583_CHIPID);
+	if (ret < 0) {
+		dev_err(&clientp->dev,
+			"%s: failed to read the chip ID register\n", __func__);
+		return ret;
+	}
+
+	if ((ret & TSL2583_CHIP_ID_MASK) != TSL2583_CHIP_ID) {
+		dev_err(&clientp->dev, "%s: received an unknown chip ID %x\n",
+			__func__, ret);
+		return -EINVAL;
+	}
+
+	indio_dev->info = &tsl2583_info;
+	indio_dev->channels = tsl2583_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tsl2583_channels);
+	indio_dev->dev.parent = &clientp->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = chip->client->name;
+
+	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
+	if (ret) {
+		dev_err(&clientp->dev, "%s: iio registration failed\n",
+			__func__);
+		return ret;
+	}
+
+	/* Load up the V2 defaults (these are hard coded defaults for now) */
+	tsl2583_defaults(chip);
+
+	/* Make sure the chip is on */
+	ret = tsl2583_chip_init_and_power_on(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	dev_info(&clientp->dev, "Light sensor found.\n");
+
+	return 0;
+}
+
+static int __maybe_unused tsl2583_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->als_mutex);
+
+	ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF);
+	chip->suspended = true;
+
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static int __maybe_unused tsl2583_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct tsl2583_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->als_mutex);
+
+	ret = tsl2583_chip_init_and_power_on(indio_dev);
+
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(tsl2583_pm_ops, tsl2583_suspend, tsl2583_resume);
+
+static struct i2c_device_id tsl2583_idtable[] = {
+	{ "tsl2580", 0 },
+	{ "tsl2581", 1 },
+	{ "tsl2583", 2 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, tsl2583_idtable);
+
+static const struct of_device_id tsl2583_of_match[] = {
+	{ .compatible = "amstaos,tsl2580", },
+	{ .compatible = "amstaos,tsl2581", },
+	{ .compatible = "amstaos,tsl2583", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tsl2583_of_match);
+
+/* Driver definition */
+static struct i2c_driver tsl2583_driver = {
+	.driver = {
+		.name = "tsl2583",
+		.pm = &tsl2583_pm_ops,
+		.of_match_table = tsl2583_of_match,
+	},
+	.id_table = tsl2583_idtable,
+	.probe = tsl2583_probe,
+};
+module_i2c_driver(tsl2583_driver);
+
+MODULE_AUTHOR("J. August Brenner <jbrenner@xxxxxxxxxxx>");
+MODULE_AUTHOR("Brian Masney <masneyb@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("TAOS tsl2583 ambient light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
deleted file mode 100644
index a2e1996..0000000
--- a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
+++ /dev/null
@@ -1,20 +0,0 @@
-What:		/sys/bus/iio/devices/device[n]/in_illuminance_calibrate
-KernelVersion:	2.6.37
-Contact:	linux-iio@xxxxxxxxxxxxxxx
-Description:
-		This property causes an internal calibration of the als gain trim
-		value which is later used in calculating illuminance in lux.
-
-What:		/sys/bus/iio/devices/device[n]/in_illuminance_lux_table
-KernelVersion:	2.6.37
-Contact:	linux-iio@xxxxxxxxxxxxxxx
-Description:
-		This property gets/sets the table of coefficients
-		used in calculating illuminance in lux.
-
-What:		/sys/bus/iio/devices/device[n]/in_illuminance_input_target
-KernelVersion:	2.6.37
-Contact:	linux-iio@xxxxxxxxxxxxxxx
-Description:
-		This property is the known externally illuminance (in lux).
-		It is used in the process of calibrating the device accuracy.
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index dbf22d3..4fbf629 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -13,13 +13,6 @@ config SENSORS_ISL29028
 	 Proximity value via iio. The ISL29028 provides the concurrent sensing
 	 of ambient light and proximity.
 
-config TSL2583
-	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
-	depends on I2C
-	help
-	 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
-	 Access ALS data via iio, sysfs.
-
 config TSL2x7x
 	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
 	depends on I2C
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index 6480856..f8693e9 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -3,5 +3,4 @@
 #
 
 obj-$(CONFIG_SENSORS_ISL29028)	+= isl29028.o
-obj-$(CONFIG_TSL2583)	+= tsl2583.o
 obj-$(CONFIG_TSL2x7x)	+= tsl2x7x_core.o
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
deleted file mode 100644
index b6da79b..0000000
--- a/drivers/staging/iio/light/tsl2583.c
+++ /dev/null
@@ -1,909 +0,0 @@
-/*
- * Device driver for monitoring ambient light intensity (lux)
- * within the TAOS tsl258x family of devices (tsl2580, tsl2581, tsl2583).
- *
- * Copyright (c) 2011, TAOS Corporation.
- * Copyright (c) 2016 Brian Masney <masneyb@xxxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/mutex.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-
-/* Device Registers and Masks */
-#define TSL2583_CNTRL			0x00
-#define TSL2583_ALS_TIME		0X01
-#define TSL2583_INTERRUPT		0x02
-#define TSL2583_GAIN			0x07
-#define TSL2583_REVID			0x11
-#define TSL2583_CHIPID			0x12
-#define TSL2583_ALS_CHAN0LO		0x14
-#define TSL2583_ALS_CHAN0HI		0x15
-#define TSL2583_ALS_CHAN1LO		0x16
-#define TSL2583_ALS_CHAN1HI		0x17
-#define TSL2583_TMR_LO			0x18
-#define TSL2583_TMR_HI			0x19
-
-/* tsl2583 cmd reg masks */
-#define TSL2583_CMD_REG			0x80
-#define TSL2583_CMD_SPL_FN		0x60
-#define TSL2583_CMD_ALS_INT_CLR		0x01
-
-/* tsl2583 cntrl reg masks */
-#define TSL2583_CNTL_ADC_ENBL		0x02
-#define TSL2583_CNTL_PWR_OFF		0x00
-#define TSL2583_CNTL_PWR_ON		0x01
-
-/* tsl2583 status reg masks */
-#define TSL2583_STA_ADC_VALID		0x01
-#define TSL2583_STA_ADC_INTR		0x10
-
-/* Lux calculation constants */
-#define	TSL2583_LUX_CALC_OVER_FLOW	65535
-
-#define TSL2583_INTERRUPT_DISABLED	0x00
-
-#define TSL2583_CHIP_ID			0x90
-#define TSL2583_CHIP_ID_MASK		0xf0
-
-/* Per-device data */
-struct tsl2583_als_info {
-	u16 als_ch0;
-	u16 als_ch1;
-	u16 lux;
-};
-
-struct tsl2583_lux {
-	unsigned int ratio;
-	unsigned int ch0;
-	unsigned int ch1;
-};
-
-static const struct tsl2583_lux tsl2583_default_lux[] = {
-	{  9830,  8520, 15729 },
-	{ 12452, 10807, 23344 },
-	{ 14746,  6383, 11705 },
-	{ 17695,  4063,  6554 },
-	{     0,     0,     0 }  /* Termination segment */
-};
-
-#define TSL2583_MAX_LUX_TABLE_ENTRIES 11
-
-struct tsl2583_settings {
-	int als_time;
-	int als_gain;
-	int als_gain_trim;
-	int als_cal_target;
-
-	/*
-	 * This structure is intentionally large to accommodate updates via
-	 * sysfs. Sized to 11 = max 10 segments + 1 termination segment.
-	 * Assumption is that one and only one type of glass used.
-	 */
-	struct tsl2583_lux als_device_lux[TSL2583_MAX_LUX_TABLE_ENTRIES];
-};
-
-struct tsl2583_chip {
-	struct mutex als_mutex;
-	struct i2c_client *client;
-	struct tsl2583_als_info als_cur_info;
-	struct tsl2583_settings als_settings;
-	int als_time_scale;
-	int als_saturation;
-	bool suspended;
-};
-
-struct gainadj {
-	s16 ch0;
-	s16 ch1;
-	s16 mean;
-};
-
-/* Index = (0 - 3) Used to validate the gain selection index */
-static const struct gainadj gainadj[] = {
-	{ 1, 1, 1 },
-	{ 8, 8, 8 },
-	{ 16, 16, 16 },
-	{ 107, 115, 111 }
-};
-
-/*
- * Provides initial operational parameter defaults.
- * These defaults may be changed through the device's sysfs files.
- */
-static void tsl2583_defaults(struct tsl2583_chip *chip)
-{
-	/*
-	 * The integration time must be a multiple of 50ms and within the
-	 * range [50, 600] ms.
-	 */
-	chip->als_settings.als_time = 100;
-
-	/*
-	 * This is an index into the gainadj table. Assume clear glass as the
-	 * default.
-	 */
-	chip->als_settings.als_gain = 0;
-
-	/* Default gain trim to account for aperture effects */
-	chip->als_settings.als_gain_trim = 1000;
-
-	/* Known external ALS reading used for calibration */
-	chip->als_settings.als_cal_target = 130;
-
-	/* Default lux table. */
-	memcpy(chip->als_settings.als_device_lux, tsl2583_default_lux,
-	       sizeof(tsl2583_default_lux));
-}
-
-/*
- * Reads and calculates current lux value.
- * The raw ch0 and ch1 values of the ambient light sensed in the last
- * integration cycle are read from the device.
- * Time scale factor array values are adjusted based on the integration time.
- * The raw values are multiplied by a scale factor, and device gain is obtained
- * using gain index. Limit checks are done next, then the ratio of a multiple
- * of ch1 value, to the ch0 value, is calculated. The array als_device_lux[]
- * declared above is then scanned to find the first ratio value that is just
- * above the ratio we just calculated. The ch0 and ch1 multiplier constants in
- * the array are then used along with the time scale factor array values, to
- * calculate the lux.
- */
-static int tsl2583_get_lux(struct iio_dev *indio_dev)
-{
-	u16 ch0, ch1; /* separated ch0/ch1 data from device */
-	u32 lux; /* raw lux calculated from device data */
-	u64 lux64;
-	u32 ratio;
-	u8 buf[5];
-	struct tsl2583_lux *p;
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	int i, ret;
-
-	ret = i2c_smbus_read_byte_data(chip->client, TSL2583_CMD_REG);
-	if (ret < 0) {
-		dev_err(&chip->client->dev, "%s: failed to read CMD_REG register\n",
-			__func__);
-		goto done;
-	}
-
-	/* is data new & valid */
-	if (!(ret & TSL2583_STA_ADC_INTR)) {
-		dev_err(&chip->client->dev, "%s: data not valid; returning last value\n",
-			__func__);
-		ret = chip->als_cur_info.lux; /* return LAST VALUE */
-		goto done;
-	}
-
-	for (i = 0; i < 4; i++) {
-		int reg = TSL2583_CMD_REG | (TSL2583_ALS_CHAN0LO + i);
-
-		ret = i2c_smbus_read_byte_data(chip->client, reg);
-		if (ret < 0) {
-			dev_err(&chip->client->dev, "%s: failed to read register %x\n",
-				__func__, reg);
-			goto done;
-		}
-		buf[i] = ret;
-	}
-
-	/*
-	 * Clear the pending interrupt status bit on the chip to allow the next
-	 * integration cycle to start. This has to be done even though this
-	 * driver currently does not support interrupts.
-	 */
-	ret = i2c_smbus_write_byte(chip->client,
-				   (TSL2583_CMD_REG | TSL2583_CMD_SPL_FN |
-				    TSL2583_CMD_ALS_INT_CLR));
-	if (ret < 0) {
-		dev_err(&chip->client->dev, "%s: failed to clear the interrupt bit\n",
-			__func__);
-		goto done; /* have no data, so return failure */
-	}
-
-	/* extract ALS/lux data */
-	ch0 = le16_to_cpup((const __le16 *)&buf[0]);
-	ch1 = le16_to_cpup((const __le16 *)&buf[2]);
-
-	chip->als_cur_info.als_ch0 = ch0;
-	chip->als_cur_info.als_ch1 = ch1;
-
-	if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation))
-		goto return_max;
-
-	if (!ch0) {
-		/* have no data, so return 0 */
-		ret = 0;
-		chip->als_cur_info.lux = 0;
-		goto done;
-	}
-
-	/* calculate ratio */
-	ratio = (ch1 << 15) / ch0;
-
-	/* convert to unscaled lux using the pointer to the table */
-	for (p = (struct tsl2583_lux *)chip->als_settings.als_device_lux;
-	     p->ratio != 0 && p->ratio < ratio; p++)
-		;
-
-	if (p->ratio == 0) {
-		lux = 0;
-	} else {
-		u32 ch0lux, ch1lux;
-
-		ch0lux = ((ch0 * p->ch0) +
-			  (gainadj[chip->als_settings.als_gain].ch0 >> 1))
-			 / gainadj[chip->als_settings.als_gain].ch0;
-		ch1lux = ((ch1 * p->ch1) +
-			  (gainadj[chip->als_settings.als_gain].ch1 >> 1))
-			 / gainadj[chip->als_settings.als_gain].ch1;
-
-		/* note: lux is 31 bit max at this point */
-		if (ch1lux > ch0lux) {
-			dev_dbg(&chip->client->dev, "%s: No Data - Returning 0\n",
-				__func__);
-			ret = 0;
-			chip->als_cur_info.lux = 0;
-			goto done;
-		}
-
-		lux = ch0lux - ch1lux;
-	}
-
-	/* adjust for active time scale */
-	if (chip->als_time_scale == 0)
-		lux = 0;
-	else
-		lux = (lux + (chip->als_time_scale >> 1)) /
-			chip->als_time_scale;
-
-	/*
-	 * Adjust for active gain scale.
-	 * The tsl2583_default_lux tables above have a factor of 8192 built in,
-	 * so we need to shift right.
-	 * User-specified gain provides a multiplier.
-	 * Apply user-specified gain before shifting right to retain precision.
-	 * Use 64 bits to avoid overflow on multiplication.
-	 * Then go back to 32 bits before division to avoid using div_u64().
-	 */
-	lux64 = lux;
-	lux64 = lux64 * chip->als_settings.als_gain_trim;
-	lux64 >>= 13;
-	lux = lux64;
-	lux = (lux + 500) / 1000;
-
-	if (lux > TSL2583_LUX_CALC_OVER_FLOW) { /* check for overflow */
-return_max:
-		lux = TSL2583_LUX_CALC_OVER_FLOW;
-	}
-
-	/* Update the structure with the latest VALID lux. */
-	chip->als_cur_info.lux = lux;
-	ret = lux;
-
-done:
-	return ret;
-}
-
-/*
- * Obtain single reading and calculate the als_gain_trim (later used
- * to derive actual lux).
- * Return updated gain_trim value.
- */
-static int tsl2583_als_calibrate(struct iio_dev *indio_dev)
-{
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	unsigned int gain_trim_val;
-	int ret;
-	int lux_val;
-
-	ret = i2c_smbus_read_byte_data(chip->client,
-				       TSL2583_CMD_REG | TSL2583_CNTRL);
-	if (ret < 0) {
-		dev_err(&chip->client->dev,
-			"%s: failed to read from the CNTRL register\n",
-			__func__);
-		return ret;
-	}
-
-	if ((ret & (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON))
-			!= (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON)) {
-		dev_err(&chip->client->dev,
-			"%s: Device is not powered on and/or ADC is not enabled\n",
-			__func__);
-		return -EINVAL;
-	} else if ((ret & TSL2583_STA_ADC_VALID) != TSL2583_STA_ADC_VALID) {
-		dev_err(&chip->client->dev,
-			"%s: The two ADC channels have not completed an integration cycle\n",
-			__func__);
-		return -ENODATA;
-	}
-
-	lux_val = tsl2583_get_lux(indio_dev);
-	if (lux_val < 0) {
-		dev_err(&chip->client->dev, "%s: failed to get lux\n",
-			__func__);
-		return lux_val;
-	}
-
-	gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target)
-			* chip->als_settings.als_gain_trim) / lux_val);
-	if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
-		dev_err(&chip->client->dev,
-			"%s: trim_val of %d is not within the range [250, 4000]\n",
-			__func__, gain_trim_val);
-		return -ENODATA;
-	}
-
-	chip->als_settings.als_gain_trim = (int)gain_trim_val;
-
-	return 0;
-}
-
-static int tsl2583_set_als_time(struct tsl2583_chip *chip)
-{
-	int als_count, als_time, ret;
-	u8 val;
-
-	/* determine als integration register */
-	als_count = (chip->als_settings.als_time * 100 + 135) / 270;
-	if (!als_count)
-		als_count = 1; /* ensure at least one cycle */
-
-	/* convert back to time (encompasses overrides) */
-	als_time = (als_count * 27 + 5) / 10;
-
-	val = 256 - als_count;
-	ret = i2c_smbus_write_byte_data(chip->client,
-					TSL2583_CMD_REG | TSL2583_ALS_TIME,
-					val);
-	if (ret < 0) {
-		dev_err(&chip->client->dev, "%s: failed to set the als time to %d\n",
-			__func__, val);
-		return ret;
-	}
-
-	/* set chip struct re scaling and saturation */
-	chip->als_saturation = als_count * 922; /* 90% of full scale */
-	chip->als_time_scale = (als_time + 25) / 50;
-
-	return ret;
-}
-
-static int tsl2583_set_als_gain(struct tsl2583_chip *chip)
-{
-	int ret;
-
-	/* Set the gain based on als_settings struct */
-	ret = i2c_smbus_write_byte_data(chip->client,
-					TSL2583_CMD_REG | TSL2583_GAIN,
-					chip->als_settings.als_gain);
-	if (ret < 0)
-		dev_err(&chip->client->dev,
-			"%s: failed to set the gain to %d\n", __func__,
-			chip->als_settings.als_gain);
-
-	return ret;
-}
-
-static int tsl2583_set_power_state(struct tsl2583_chip *chip, u8 state)
-{
-	int ret;
-
-	ret = i2c_smbus_write_byte_data(chip->client,
-					TSL2583_CMD_REG | TSL2583_CNTRL, state);
-	if (ret < 0)
-		dev_err(&chip->client->dev,
-			"%s: failed to set the power state to %d\n", __func__,
-			state);
-
-	return ret;
-}
-
-/*
- * Turn the device on.
- * Configuration must be set before calling this function.
- */
-static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev)
-{
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	int ret;
-
-	/* Power on the device; ADC off. */
-	ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON);
-	if (ret < 0)
-		return ret;
-
-	ret = i2c_smbus_write_byte_data(chip->client,
-					TSL2583_CMD_REG | TSL2583_INTERRUPT,
-					TSL2583_INTERRUPT_DISABLED);
-	if (ret < 0) {
-		dev_err(&chip->client->dev,
-			"%s: failed to disable interrupts\n", __func__);
-		return ret;
-	}
-
-	ret = tsl2583_set_als_time(chip);
-	if (ret < 0)
-		return ret;
-
-	ret = tsl2583_set_als_gain(chip);
-	if (ret < 0)
-		return ret;
-
-	usleep_range(3000, 3500);
-
-	ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON |
-					    TSL2583_CNTL_ADC_ENBL);
-	if (ret < 0)
-		return ret;
-
-	chip->suspended = false;
-
-	return ret;
-}
-
-/* Sysfs Interface Functions */
-
-static ssize_t in_illuminance_input_target_show(struct device *dev,
-						struct device_attribute *attr,
-						char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	int ret;
-
-	mutex_lock(&chip->als_mutex);
-	ret = sprintf(buf, "%d\n", chip->als_settings.als_cal_target);
-	mutex_unlock(&chip->als_mutex);
-
-	return ret;
-}
-
-static ssize_t in_illuminance_input_target_store(struct device *dev,
-						 struct device_attribute *attr,
-						 const char *buf, size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	int value;
-
-	if (kstrtoint(buf, 0, &value) || !value)
-		return -EINVAL;
-
-	mutex_lock(&chip->als_mutex);
-	chip->als_settings.als_cal_target = value;
-	mutex_unlock(&chip->als_mutex);
-
-	return len;
-}
-
-static ssize_t in_illuminance_calibrate_store(struct device *dev,
-					      struct device_attribute *attr,
-					      const char *buf, size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	int value, ret;
-
-	if (kstrtoint(buf, 0, &value) || value != 1)
-		return -EINVAL;
-
-	mutex_lock(&chip->als_mutex);
-
-	if (chip->suspended) {
-		ret = -EBUSY;
-		goto done;
-	}
-
-	ret = tsl2583_als_calibrate(indio_dev);
-	if (ret < 0)
-		goto done;
-
-	ret = len;
-done:
-	mutex_unlock(&chip->als_mutex);
-
-	return ret;
-}
-
-static ssize_t in_illuminance_lux_table_show(struct device *dev,
-					     struct device_attribute *attr,
-					     char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	unsigned int i;
-	int offset = 0;
-
-	for (i = 0; i < ARRAY_SIZE(chip->als_settings.als_device_lux); i++) {
-		offset += sprintf(buf + offset, "%u,%u,%u,",
-				  chip->als_settings.als_device_lux[i].ratio,
-				  chip->als_settings.als_device_lux[i].ch0,
-				  chip->als_settings.als_device_lux[i].ch1);
-		if (chip->als_settings.als_device_lux[i].ratio == 0) {
-			/*
-			 * We just printed the first "0" entry.
-			 * Now get rid of the extra "," and break.
-			 */
-			offset--;
-			break;
-		}
-	}
-
-	offset += sprintf(buf + offset, "\n");
-
-	return offset;
-}
-
-static ssize_t in_illuminance_lux_table_store(struct device *dev,
-					      struct device_attribute *attr,
-					      const char *buf, size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
-	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3];
-	int ret = -EINVAL;
-	unsigned int n;
-
-	mutex_lock(&chip->als_mutex);
-
-	get_options(buf, ARRAY_SIZE(value), value);
-
-	/*
-	 * We now have an array of ints starting at value[1], and
-	 * enumerated by value[0].
-	 * We expect each group of three ints is one table entry,
-	 * and the last table entry is all 0.
-	 */
-	n = value[0];
-	if ((n % 3) || n < 6 || n > max_ints) {
-		dev_err(dev,
-			"%s: The number of entries in the lux table must be a multiple of 3 and within the range [6, %d]\n",
-			__func__, max_ints);
-		goto done;
-	}
-	if ((value[n - 2] | value[n - 1] | value[n]) != 0) {
-		dev_err(dev, "%s: The last 3 entries in the lux table must be zeros.\n",
-			__func__);
-		goto done;
-	}
-
-	memcpy(chip->als_settings.als_device_lux, &value[1],
-	       value[0] * sizeof(unsigned int));
-
-	ret = len;
-
-done:
-	mutex_unlock(&chip->als_mutex);
-
-	return ret;
-}
-
-static IIO_CONST_ATTR(in_illuminance_calibscale_available, "1 8 16 111");
-static IIO_CONST_ATTR(in_illuminance_integration_time_available,
-		      "0.000050 0.000100 0.000150 0.000200 0.000250 0.000300 0.000350 0.000400 0.000450 0.000500 0.000550 0.000600 0.000650");
-static IIO_DEVICE_ATTR_RW(in_illuminance_input_target, 0);
-static IIO_DEVICE_ATTR_WO(in_illuminance_calibrate, 0);
-static IIO_DEVICE_ATTR_RW(in_illuminance_lux_table, 0);
-
-static struct attribute *sysfs_attrs_ctrl[] = {
-	&iio_const_attr_in_illuminance_calibscale_available.dev_attr.attr,
-	&iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr,
-	&iio_dev_attr_in_illuminance_input_target.dev_attr.attr,
-	&iio_dev_attr_in_illuminance_calibrate.dev_attr.attr,
-	&iio_dev_attr_in_illuminance_lux_table.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group tsl2583_attribute_group = {
-	.attrs = sysfs_attrs_ctrl,
-};
-
-static const struct iio_chan_spec tsl2583_channels[] = {
-	{
-		.type = IIO_LIGHT,
-		.modified = 1,
-		.channel2 = IIO_MOD_LIGHT_IR,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-	},
-	{
-		.type = IIO_LIGHT,
-		.modified = 1,
-		.channel2 = IIO_MOD_LIGHT_BOTH,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-	},
-	{
-		.type = IIO_LIGHT,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
-				      BIT(IIO_CHAN_INFO_CALIBBIAS) |
-				      BIT(IIO_CHAN_INFO_CALIBSCALE) |
-				      BIT(IIO_CHAN_INFO_INT_TIME),
-	},
-};
-
-static int tsl2583_read_raw(struct iio_dev *indio_dev,
-			    struct iio_chan_spec const *chan,
-			    int *val, int *val2, long mask)
-{
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	int ret = -EINVAL;
-
-	mutex_lock(&chip->als_mutex);
-
-	if (chip->suspended) {
-		ret = -EBUSY;
-		goto read_done;
-	}
-
-	switch (mask) {
-	case IIO_CHAN_INFO_RAW:
-		if (chan->type == IIO_LIGHT) {
-			ret = tsl2583_get_lux(indio_dev);
-			if (ret < 0)
-				goto read_done;
-
-			/*
-			 * From page 20 of the TSL2581, TSL2583 data
-			 * sheet (TAOS134 − MARCH 2011):
-			 *
-			 * One of the photodiodes (channel 0) is
-			 * sensitive to both visible and infrared light,
-			 * while the second photodiode (channel 1) is
-			 * sensitive primarily to infrared light.
-			 */
-			if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
-				*val = chip->als_cur_info.als_ch0;
-			else
-				*val = chip->als_cur_info.als_ch1;
-
-			ret = IIO_VAL_INT;
-		}
-		break;
-	case IIO_CHAN_INFO_PROCESSED:
-		if (chan->type == IIO_LIGHT) {
-			ret = tsl2583_get_lux(indio_dev);
-			if (ret < 0)
-				goto read_done;
-
-			*val = ret;
-			ret = IIO_VAL_INT;
-		}
-		break;
-	case IIO_CHAN_INFO_CALIBBIAS:
-		if (chan->type == IIO_LIGHT) {
-			*val = chip->als_settings.als_gain_trim;
-			ret = IIO_VAL_INT;
-		}
-		break;
-	case IIO_CHAN_INFO_CALIBSCALE:
-		if (chan->type == IIO_LIGHT) {
-			*val = gainadj[chip->als_settings.als_gain].mean;
-			ret = IIO_VAL_INT;
-		}
-		break;
-	case IIO_CHAN_INFO_INT_TIME:
-		if (chan->type == IIO_LIGHT) {
-			*val = 0;
-			*val2 = chip->als_settings.als_time;
-			ret = IIO_VAL_INT_PLUS_MICRO;
-		}
-		break;
-	default:
-		break;
-	}
-
-read_done:
-	mutex_unlock(&chip->als_mutex);
-
-	return ret;
-}
-
-static int tsl2583_write_raw(struct iio_dev *indio_dev,
-			     struct iio_chan_spec const *chan,
-			     int val, int val2, long mask)
-{
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	int ret = -EINVAL;
-
-	mutex_lock(&chip->als_mutex);
-
-	if (chip->suspended) {
-		ret = -EBUSY;
-		goto write_done;
-	}
-
-	switch (mask) {
-	case IIO_CHAN_INFO_CALIBBIAS:
-		if (chan->type == IIO_LIGHT) {
-			chip->als_settings.als_gain_trim = val;
-			ret = 0;
-		}
-		break;
-	case IIO_CHAN_INFO_CALIBSCALE:
-		if (chan->type == IIO_LIGHT) {
-			unsigned int i;
-
-			for (i = 0; i < ARRAY_SIZE(gainadj); i++) {
-				if (gainadj[i].mean == val) {
-					chip->als_settings.als_gain = i;
-					ret = tsl2583_set_als_gain(chip);
-					break;
-				}
-			}
-		}
-		break;
-	case IIO_CHAN_INFO_INT_TIME:
-		if (chan->type == IIO_LIGHT && !val && val2 >= 50 &&
-		    val2 <= 650 && !(val2 % 50)) {
-			chip->als_settings.als_time = val2;
-			ret = tsl2583_set_als_time(chip);
-		}
-		break;
-	default:
-		break;
-	}
-
-write_done:
-	mutex_unlock(&chip->als_mutex);
-
-	return ret;
-}
-
-static const struct iio_info tsl2583_info = {
-	.attrs = &tsl2583_attribute_group,
-	.driver_module = THIS_MODULE,
-	.read_raw = tsl2583_read_raw,
-	.write_raw = tsl2583_write_raw,
-};
-
-static int tsl2583_probe(struct i2c_client *clientp,
-			 const struct i2c_device_id *idp)
-{
-	int ret;
-	struct tsl2583_chip *chip;
-	struct iio_dev *indio_dev;
-
-	if (!i2c_check_functionality(clientp->adapter,
-				     I2C_FUNC_SMBUS_BYTE_DATA)) {
-		dev_err(&clientp->dev, "%s: i2c smbus byte data functionality is unsupported\n",
-			__func__);
-		return -EOPNOTSUPP;
-	}
-
-	indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip));
-	if (!indio_dev)
-		return -ENOMEM;
-
-	chip = iio_priv(indio_dev);
-	chip->client = clientp;
-	i2c_set_clientdata(clientp, indio_dev);
-
-	mutex_init(&chip->als_mutex);
-	chip->suspended = true;
-
-	ret = i2c_smbus_read_byte_data(clientp,
-				       TSL2583_CMD_REG | TSL2583_CHIPID);
-	if (ret < 0) {
-		dev_err(&clientp->dev,
-			"%s: failed to read the chip ID register\n", __func__);
-		return ret;
-	}
-
-	if ((ret & TSL2583_CHIP_ID_MASK) != TSL2583_CHIP_ID) {
-		dev_err(&clientp->dev, "%s: received an unknown chip ID %x\n",
-			__func__, ret);
-		return -EINVAL;
-	}
-
-	indio_dev->info = &tsl2583_info;
-	indio_dev->channels = tsl2583_channels;
-	indio_dev->num_channels = ARRAY_SIZE(tsl2583_channels);
-	indio_dev->dev.parent = &clientp->dev;
-	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->name = chip->client->name;
-
-	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
-	if (ret) {
-		dev_err(&clientp->dev, "%s: iio registration failed\n",
-			__func__);
-		return ret;
-	}
-
-	/* Load up the V2 defaults (these are hard coded defaults for now) */
-	tsl2583_defaults(chip);
-
-	/* Make sure the chip is on */
-	ret = tsl2583_chip_init_and_power_on(indio_dev);
-	if (ret < 0)
-		return ret;
-
-	dev_info(&clientp->dev, "Light sensor found.\n");
-
-	return 0;
-}
-
-static int __maybe_unused tsl2583_suspend(struct device *dev)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	int ret;
-
-	mutex_lock(&chip->als_mutex);
-
-	ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF);
-	chip->suspended = true;
-
-	mutex_unlock(&chip->als_mutex);
-
-	return ret;
-}
-
-static int __maybe_unused tsl2583_resume(struct device *dev)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
-	struct tsl2583_chip *chip = iio_priv(indio_dev);
-	int ret;
-
-	mutex_lock(&chip->als_mutex);
-
-	ret = tsl2583_chip_init_and_power_on(indio_dev);
-
-	mutex_unlock(&chip->als_mutex);
-
-	return ret;
-}
-
-static SIMPLE_DEV_PM_OPS(tsl2583_pm_ops, tsl2583_suspend, tsl2583_resume);
-
-static struct i2c_device_id tsl2583_idtable[] = {
-	{ "tsl2580", 0 },
-	{ "tsl2581", 1 },
-	{ "tsl2583", 2 },
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, tsl2583_idtable);
-
-static const struct of_device_id tsl2583_of_match[] = {
-	{ .compatible = "amstaos,tsl2580", },
-	{ .compatible = "amstaos,tsl2581", },
-	{ .compatible = "amstaos,tsl2583", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, tsl2583_of_match);
-
-/* Driver definition */
-static struct i2c_driver tsl2583_driver = {
-	.driver = {
-		.name = "tsl2583",
-		.pm = &tsl2583_pm_ops,
-		.of_match_table = tsl2583_of_match,
-	},
-	.id_table = tsl2583_idtable,
-	.probe = tsl2583_probe,
-};
-module_i2c_driver(tsl2583_driver);
-
-MODULE_AUTHOR("J. August Brenner <jbrenner@xxxxxxxxxxx>");
-MODULE_AUTHOR("Brian Masney <masneyb@xxxxxxxxxxxxx>");
-MODULE_DESCRIPTION("TAOS tsl2583 ambient light sensor driver");
-MODULE_LICENSE("GPL");
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux