On 03/11/16 12:56, Brian Masney wrote: > in taos_defaults() > > The comments in taos_defaults() appear after the line of code > that they apply to. This patch moves the comments so that they appear > before the code. Some of the comments were updated to be more > informative. > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> Nice tidying up. Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > drivers/staging/iio/light/tsl2583.c | 19 +++++++++++++------ > 1 file changed, 13 insertions(+), 6 deletions(-) > > diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c > index 388440b..709f446 100644 > --- a/drivers/staging/iio/light/tsl2583.c > +++ b/drivers/staging/iio/light/tsl2583.c > @@ -143,16 +143,23 @@ static const struct gainadj gainadj[] = { > */ > static void taos_defaults(struct tsl2583_chip *chip) > { > - /* Operational parameters */ > + /* > + * The integration time must be a multiple of 50ms and within the > + * range [50, 600] ms. > + */ > chip->taos_settings.als_time = 100; > - /* must be a multiple of 50mS */ > + > + /* > + * This is an index into the gainadj table. Assume clear glass as the > + * default. > + */ > chip->taos_settings.als_gain = 0; > - /* this is actually an index into the gain table */ > - /* assume clear glass as default */ > + > + /* Default gain trim to account for aperture effects */ > chip->taos_settings.als_gain_trim = 1000; > - /* default gain trim to account for aperture effects */ > - chip->taos_settings.als_cal_target = 130; > + > /* Known external ALS reading used for calibration */ > + chip->taos_settings.als_cal_target = 130; > } > > /* > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html