On Fri, 2016-09-02 at 11:53 -0300, Fabio Estevam wrote:
> On Fri, Sep 2, 2016 at 11:49 AM, Christoph Fritz
> <chf.fritz@xxxxxxxxxxxxxx> wrote:
>
> > +sx9500@28 {
> > + compatible = "semtech,sx9500";
> > + reg = <0x28>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_sx9500>;
> > + interrupt-parent = <&gpio2>;
> > + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> > + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
>
> Datasheet says the reset is active low.
Here on my board I'm using the reset pin as an open-drain with external
pullup, so GPIO_ACTIVE_HIGH is valid.
As this is an example, I don't care if it says _HIGH or _LOW.
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
