This makes sx9500 driver usable on devicetree based platforms too.
Signed-off-by: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/iio/proximity/sx9500.txt | 22 ++++++++++++++++++++++
drivers/iio/proximity/sx9500.c | 7 +++++++
2 files changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/proximity/sx9500.txt
diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
new file mode 100644
index 0000000..90ede53
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
@@ -0,0 +1,22 @@
+Semtech's SX9500 capacitive proximity button device driver
+
+Required properties:
+ - compatible: must be "semtech,sx9500"
+ - reg: i2c address where to find the device
+ - interrupt-parent : should be the phandle for the interrupt controller
+ - interrupts : the sole interrupt generated by the device
+
+ Refer to interrupt-controller/interrupts.txt for generic
+ interrupt client node bindings.
+
+Example:
+
+sx9500@28 {
+ compatible = "semtech,sx9500";
+ reg = <0x28>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sx9500>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+};
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
index 66cd09a..a136b34 100644
--- a/drivers/iio/proximity/sx9500.c
+++ b/drivers/iio/proximity/sx9500.c
@@ -1025,6 +1025,12 @@ static const struct acpi_device_id sx9500_acpi_match[] = {
};
MODULE_DEVICE_TABLE(acpi, sx9500_acpi_match);
+static const struct of_device_id sx9500_of_match[] = {
+ { .compatible = "semtech,sx9500", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sx9500_of_match);
+
static const struct i2c_device_id sx9500_id[] = {
{"sx9500", 0},
{ },
@@ -1035,6 +1041,7 @@ static struct i2c_driver sx9500_driver = {
.driver = {
.name = SX9500_DRIVER_NAME,
.acpi_match_table = ACPI_PTR(sx9500_acpi_match),
+ .of_match_table = of_match_ptr(sx9500_of_match),
.pm = &sx9500_pm_ops,
},
.probe = sx9500_probe,
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
