Re: [PATCH v4 0/4] Add support for cros-ec-sensors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/08/16 13:49, Lee Jones wrote:
> On Mon, 15 Aug 2016, Jonathan Cameron wrote:
> 
>> On 01/08/16 10:54, Enric Balletbo i Serra wrote:
>>> Hi,
>>>
>>> This is the four patchset to add support for the sensors behind the ChromeOS
>>> Embedded Controller.
>>>
>>> This version has only the patches to support common functions and 3d
>>> contiguous sensors like Accelerometers, Gyroscope and Magnetometer that are
>>> presented by the ChromeOS EC Sensor hub. The patches were tested on an Oak board.
>>>
>>> The code was checked out from the ChromeOS v3.18 tree and forward ported to
>>> mainline solving all the conflicts and build issues. I splitted the code in
>>> single patches that have sense by themselves in order to avoid the chances
>>> to fail.
>>>
>>> Note that the patches depends on this [1] to apply and work.
>>>
>>> [1] https://lkml.org/lkml/2016/7/1/188
>> Given this dependency I'm assuming the best route for these is via
>> the MFD tree...
>>
>> Lee, shout if you want them to go a different route.
> 
> IIO looks like a more suitable route.  Please provide me with a
> pull-request base off of an immutable tag.
Hi Lee,

As far as I can tell the precursor patch above hasn't gone in your
tree yet which leaves me unable to take this through IIO for now.

Maybe I'm missing something!

Jonathan
> 
>>> Waiting for your reviews and feedback.
>>>
>>> Changes since v3 (requested by Guenter Roeck)
>>>   - Convert structure to a simple array
>>>   - Remove PM declarations
>>>   - Remove unnecessary initializations
>>>   - cros_ec_sensors_cmd_read_u16: Conversion should only be done if ret >= 0
>>>   - Remove unnecessary else
>>>   - Add Reviewed-by tag for two last patches.
>>>
>>> Changes since v2 (requested by Guenter Roeck and Jonhatan Cameron)
>>>   - Rebased and fix build error.
>>>   - Include a list of possible values in the description of location attr.
>>>   - Fix some typos.
>>>   - Remove id sysfs entry.
>>>   - Skip filling by zero structure parameters that already zero'd.
>>>   - Order includes alphabetically.
>>>   - Propagate error codes.
>>>
>>> Changes since v1 (requested by Peter Meerwald-Stadler and Jonhatan Cameron)
>>>   - Check kernel-doc documentation and 
>>>   - Bring some patches together.
>>>   - Fix some spelling mistakes.
>>>   - Include ABI documentation.
>>>   - Be more careful with buffer sizes (sprintf -> snprintf)
>>>   - Add cros_ec_sensors prefix to all function.
>>>   - Check return values on some functions.
>>>
>>> Best regards,
>>>
>>> Enric Balletbo i Serra (3):
>>>   iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC
>>>     Sensor Hub.
>>>   iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
>>>   platform/chrome: cros_ec_dev - Register cros-ec sensors
>>>
>>> Vincent Palatin (1):
>>>   platform/chrome: Introduce a new function to check EC features.
>>>
>>>  Documentation/ABI/testing/sysfs-bus-iio-cros-ec    |  18 +
>>>  drivers/iio/common/Kconfig                         |   1 +
>>>  drivers/iio/common/Makefile                        |   1 +
>>>  drivers/iio/common/cros_ec_sensors/Kconfig         |  22 +
>>>  drivers/iio/common/cros_ec_sensors/Makefile        |   6 +
>>>  .../iio/common/cros_ec_sensors/cros_ec_sensors.c   | 322 +++++++++++++++
>>>  .../common/cros_ec_sensors/cros_ec_sensors_core.c  | 450 +++++++++++++++++++++
>>>  .../common/cros_ec_sensors/cros_ec_sensors_core.h  | 175 ++++++++
>>>  drivers/platform/chrome/cros_ec_dev.c              | 159 ++++++++
>>>  include/linux/mfd/cros_ec.h                        |  10 +
>>>  include/linux/mfd/cros_ec_commands.h               | 183 ++++++++-
>>>  11 files changed, 1342 insertions(+), 5 deletions(-)
>>>  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-cros-ec
>>>  create mode 100644 drivers/iio/common/cros_ec_sensors/Kconfig
>>>  create mode 100644 drivers/iio/common/cros_ec_sensors/Makefile
>>>  create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
>>>  create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
>>>  create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h
>>>
>>
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux