This is just a masquerading register write function, so use the
register write function instead.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/iio/accel/kxsd9-spi.c | 10 ----------
drivers/iio/accel/kxsd9.c | 4 ++--
drivers/iio/accel/kxsd9.h | 2 --
3 files changed, 2 insertions(+), 14 deletions(-)
diff --git a/drivers/iio/accel/kxsd9-spi.c b/drivers/iio/accel/kxsd9-spi.c
index 0789695c89e1..332b7664233e 100644
--- a/drivers/iio/accel/kxsd9-spi.c
+++ b/drivers/iio/accel/kxsd9-spi.c
@@ -25,15 +25,6 @@ static int kxsd9_spi_writereg(struct kxsd9_transport *tr, u8 address, u8 val)
return spi_write(spi, tr->tx, 2);
}
-static int kxsd9_spi_write2(struct kxsd9_transport *tr, u8 b1, u8 b2)
-{
- struct spi_device *spi = tr->trdev;
-
- tr->tx[0] = b1;
- tr->tx[1] = b2;
- return spi_write(spi, tr->tx, 2);
-}
-
static int kxsd9_spi_readval(struct kxsd9_transport *tr, u8 address)
{
struct spi_device *spi = tr->trdev;
@@ -70,7 +61,6 @@ static int kxsd9_spi_probe(struct spi_device *spi)
transport->trdev = spi;
transport->readreg = kxsd9_spi_readreg;
transport->writereg = kxsd9_spi_writereg;
- transport->write2 = kxsd9_spi_write2;
transport->readval = kxsd9_spi_readval;
spi->mode = SPI_MODE_0;
spi_setup(spi);
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index efa9ba665f6e..7c94a0d3464a 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -184,10 +184,10 @@ static int kxsd9_power_up(struct kxsd9_state *st)
{
int ret;
- ret = st->transport->write2(st->transport, 0x0d, 0x40);
+ ret = st->transport->writereg(st->transport, KXSD9_REG_CTRL_B, 0x40);
if (ret)
return ret;
- return st->transport->write2(st->transport, 0x0c, 0x9b);
+ return st->transport->writereg(st->transport, KXSD9_REG_CTRL_C, 0x9b);
};
static const struct iio_info kxsd9_info = {
diff --git a/drivers/iio/accel/kxsd9.h b/drivers/iio/accel/kxsd9.h
index c260a54e00fe..32f86c9b33c7 100644
--- a/drivers/iio/accel/kxsd9.h
+++ b/drivers/iio/accel/kxsd9.h
@@ -11,7 +11,6 @@ struct kxsd9_transport;
* @trdev: transport device such as SPI or I2C
* @readreg(): function to read a byte from an address in the device
* @writereg(): function to write a byte to an address in the device
- * @write2(): function to write two consecutive bytes to the device
* @readval(): function to read a 16bit value from the device
* @rx: cache aligned read buffer
* @tx: cache aligned write buffer
@@ -20,7 +19,6 @@ struct kxsd9_transport {
void *trdev;
int (*readreg) (struct kxsd9_transport *tr, u8 address);
int (*writereg) (struct kxsd9_transport *tr, u8 address, u8 val);
- int (*write2) (struct kxsd9_transport *tr, u8 b1, u8 b2);
int (*readval) (struct kxsd9_transport *tr, u8 address);
u8 rx[KXSD9_STATE_RX_SIZE] ____cacheline_aligned;
u8 tx[KXSD9_STATE_TX_SIZE];
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
