[PATCH 3/3] iio: chemical: atlas-ph-sensor: add ORP feature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
---
 .../bindings/iio/chemical/atlas,orp-sm.txt         | 22 +++++++++
 drivers/iio/chemical/Kconfig                       |  1 +
 drivers/iio/chemical/atlas-ph-sensor.c             | 53 +++++++++++++++++++++-
 3 files changed, 75 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt

diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
new file mode 100644
index 000000000000..5d8b687d5edc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
@@ -0,0 +1,22 @@
+* Atlas Scientific ORP-SM OEM sensor
+
+https://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf
+
+Required properties:
+
+  - compatible: must be "atlas,orp-sm"
+  - reg: the I2C address of the sensor
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client
+  node bindings.
+
+Example:
+
+atlas@66 {
+	compatible = "atlas,orp-sm";
+	reg = <0x66>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 2>;
+};
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index 4bcc025e8c8a..cea7f9857a1f 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -16,6 +16,7 @@ config ATLAS_PH_SENSOR
 	 Atlas Scientific OEM SM sensors:
 	    * pH SM sensor
 	    * EC SM sensor
+	    * ORP SM sensor
 
 	 To compile this driver as module, choose M here: the
 	 module will be called atlas-ph-sensor.
diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
index a5993729cc47..46aa373718d6 100644
--- a/drivers/iio/chemical/atlas-ph-sensor.c
+++ b/drivers/iio/chemical/atlas-ph-sensor.c
@@ -66,12 +66,17 @@
 #define ATLAS_REG_TDS_DATA		0x1c
 #define ATLAS_REG_PSS_DATA		0x20
 
+#define ATLAS_REG_ORP_CALIB_STATUS	0x0d
+#define ATLAS_REG_ORP_DATA		0x0e
+
 #define ATLAS_PH_INT_TIME_IN_US		450000
 #define ATLAS_EC_INT_TIME_IN_US		650000
+#define ATLAS_ORP_INT_TIME_IN_US	450000
 
 enum {
 	ATLAS_PH_SM,
 	ATLAS_EC_SM,
+	ATLAS_ORP_SM,
 };
 
 struct atlas_data {
@@ -159,6 +164,23 @@ static const struct iio_chan_spec atlas_ec_channels[] = {
 	},
 };
 
+static const struct iio_chan_spec atlas_orp_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.address = ATLAS_REG_ORP_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
 static int atlas_check_ph_calibration(struct atlas_data *data)
 {
 	struct device *dev = &data->client->dev;
@@ -224,6 +246,22 @@ static int atlas_check_ec_calibration(struct atlas_data *data)
 	return 0;
 }
 
+static int atlas_check_orp_calibration(struct atlas_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, ATLAS_REG_ORP_CALIB_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (!val)
+		dev_warn(dev, "device has not been calibrated\n");
+
+	return 0;
+};
+
 struct atlas_device {
 	const struct iio_chan_spec *channels;
 	int num_channels;
@@ -248,7 +286,13 @@ static struct atlas_device atlas_devices[] = {
 				.calibration = &atlas_check_ec_calibration,
 				.delay = ATLAS_EC_INT_TIME_IN_US,
 	},
-
+	[ATLAS_ORP_SM] = {
+				.channels = atlas_orp_channels,
+				.num_channels = 2,
+				.data_reg = ATLAS_REG_ORP_DATA,
+				.calibration = &atlas_check_orp_calibration,
+				.delay = ATLAS_ORP_INT_TIME_IN_US,
+	},
 };
 
 static int atlas_set_powermode(struct atlas_data *data, int on)
@@ -386,6 +430,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 		case IIO_PH:
 		case IIO_CONCENTRATION:
 		case IIO_ELECTRICALCONDUCTIVITY:
+		case IIO_VOLTAGE:
 			ret = iio_device_claim_direct_mode(indio_dev);
 			if (ret)
 				return ret;
@@ -426,6 +471,10 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 			*val = 0; /* 0.000000001 */
 			*val2 = 1000;
 			return IIO_VAL_INT_PLUS_NANO;
+		case IIO_VOLTAGE:
+			*val = 1; /* 0.1 */
+			*val2 = 10;
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -461,6 +510,7 @@ static const struct iio_info atlas_info = {
 static const struct i2c_device_id atlas_id[] = {
 	{ "atlas-ph-sm", ATLAS_PH_SM},
 	{ "atlas-ec-sm", ATLAS_EC_SM},
+	{ "atlas-orp-sm", ATLAS_ORP_SM},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, atlas_id);
@@ -468,6 +518,7 @@ MODULE_DEVICE_TABLE(i2c, atlas_id);
 static const struct of_device_id atlas_dt_ids[] = {
 	{ .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, },
 	{ .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, },
+	{ .compatible = "atlas,orp-sm", .data = (void *)ATLAS_ORP_SM, },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, atlas_dt_ids);
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux