On 04/25/2016 11:11 PM, Jonathan Cameron wrote: > On 25/04/16 21:59, Crestez Dan Leonard wrote: >> On 04/25/2016 10:33 PM, Jonathan Cameron wrote: >>> On 22/04/16 04:43, Yong Li wrote: >>>> When load the driver using the below command: >>>> echo tmp006 0x40 > /sys/bus/i2c/devices/i2c-0/new_device >>>> >>>> In sysfs, the i2c name is tmp006, however the iio name is 0-0040, >>>> they are inconsistent. With this patch, >>>> the iio name will be the same as the i2c device name >>>> >>>> Signed-off-by: Yong Li <sdliyong@xxxxxxxxx> >>> Peter, this looks right to me, but could you take a quick look as I guess >>> there might be a reason you did this in an unusual way originally? >>> >> Is there a "correct" or "usual" way to set indio_dev->name? Some quick grepping shows no clear standard: >> >> $ git grep -h 'indio_dev->name =' drivers/iio/ | wc -l >> 148 >> $ git grep -h 'indio_dev->name =' drivers/iio/ | grep id | wc -l >> 52 >> $ git grep -h 'indio_dev->name =' drivers/iio/ | grep dev_name | wc -l >> 20 >> $ git grep -h 'indio_dev->name =' drivers/iio/ | grep -i drv | wc -l >> 19 >> $ git grep -h 'indio_dev->name =' drivers/iio/ | grep -i driver | wc -l >> 15 >> >> It seems that many devices use dev_name(&i2c_client->dev) or >> otherwise some sort of "ABC123_DRIVER_NAME" constant. >> >> It's also not clear what this "name" field is for. Is it more than >> just a cosmetic sysfs attribute? It seems to me that names don't have >> to be unique so it would be wrong to use them for identification. >> > It's a convenience field really as there is no clear standard for where else > to find out what a part actually is (i.e. if it is an i2c part you can look > in the name attribute i2c supplies - but otherwise you are on your own). I'd like to argue that it is supposed to be the device type allowing the application to identify which kind of device they are talking to. In which case the dev_name() initialization is wrong. Unfortunately there seem quite a few drivers which use it, especially the the SoC ADC drivers. But we can't really change this for existing drivers since there might be applications relying on the name. We should pay more attention to this for new driver submissions and make sure we don't get any more of this. As a side note if you want to know the dev_name() of the parent device you can do a readlink() on the iio device in /sys/bus/iio/devices/. The second last entry in the path name is the name of the parent device. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
