On 18/04/16 15:31, Crestez Dan Leonard wrote:
> The proximity sensor relies on sending pulses to an external IR led and
> it is disabled by default on powerup. The driver will enable it with a
> default power setting.
>
> Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
Applied.
> ---
> drivers/iio/light/max44000.c | 45 ++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 43 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c
> index 5ed7934..dc63de2 100644
> --- a/drivers/iio/light/max44000.c
> +++ b/drivers/iio/light/max44000.c
> @@ -59,6 +59,11 @@
> */
> #define MAX44000_REG_CFG_RX_DEFAULT 0xf0
>
> +/* REG_TX bits */
> +#define MAX44000_LED_CURRENT_MASK 0xf
> +#define MAX44000_LED_CURRENT_MAX 11
> +#define MAX44000_LED_CURRENT_DEFAULT 6
> +
> #define MAX44000_ALSDATA_OVERFLOW 0x4000
>
> struct max44000_data {
> @@ -75,6 +80,11 @@ static const struct iio_chan_spec max44000_channels[] = {
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> },
> + {
> + .type = IIO_PROXIMITY,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> + },
> };
>
> static int max44000_read_alsval(struct max44000_data *data)
> @@ -104,11 +114,23 @@ static int max44000_read_alsval(struct max44000_data *data)
> return regval;
> }
>
> +static int max44000_write_led_current_raw(struct max44000_data *data, int val)
> +{
> + /* Maybe we should clamp the value instead? */
> + if (val < 0 || val > MAX44000_LED_CURRENT_MAX)
> + return -ERANGE;
> + if (val >= 8)
> + val += 4;
> + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_TX,
> + MAX44000_LED_CURRENT_MASK, val);
> +}
> +
> static int max44000_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int *val, int *val2, long mask)
> {
> struct max44000_data *data = iio_priv(indio_dev);
> + unsigned int regval;
> int ret;
>
> switch (mask) {
> @@ -123,6 +145,15 @@ static int max44000_read_raw(struct iio_dev *indio_dev,
> *val = ret;
> return IIO_VAL_INT;
>
> + case IIO_PROXIMITY:
> + mutex_lock(&data->lock);
> + ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val);
> + mutex_unlock(&data->lock);
> + if (ret < 0)
> + return ret;
> + *val = regval;
> + return IIO_VAL_INT;
> +
> default:
> return -EINVAL;
> }
> @@ -266,8 +297,18 @@ static int max44000_probe(struct i2c_client *client,
> return ret;
> }
>
> - /* Reset CFG bits to ALS-only mode and no interrupts */
> - reg = MAX44000_CFG_TRIM | MAX44000_CFG_MODE_ALS_GIR;
> + /*
> + * By default the LED pulse used for the proximity sensor is disabled.
> + * Set a middle value so that we get some sort of valid data by default.
> + */
> + ret = max44000_write_led_current_raw(data, MAX44000_LED_CURRENT_DEFAULT);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to write init config: %d\n", ret);
> + return ret;
> + }
> +
> + /* Reset CFG bits to ALS_PRX mode which allows easy reading of both values. */
> + reg = MAX44000_CFG_TRIM | MAX44000_CFG_MODE_ALS_PRX;
> ret = regmap_write(data->regmap, MAX44000_REG_CFG_MAIN, reg);
> if (ret < 0) {
> dev_err(&client->dev, "failed to write init config: %d\n", ret);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
