Changes since v2: * Drop reg_defaults from regmap_config * Use REGCACHE_RBTREE * Implement readable/writable/volatile reg with switches * Use test_bit when checking the scan mask * Add _INT_TIME info_mask in patch 4 rather than 2 * Cleaner spacing in max44000_remove Changes since v1: * Remove max44000_data.client * Maintain alphabetical order in kconfig/makefile * Avoid pointless inlines * Remove explicit CONFIG_OF because no special handling is done * Set storagebits = 16 for proximity channel and avoid VLAs * Expand MAX44000_REGMASK for readability/reviewability * Clear irq bits at the end of the probe function * Only write important bits on probe rather than everything Crestez Dan Leonard (5): max44000: Initial support max44000: Initial support for proximity reading max44000: Support controlling LED current output max44000: Expose ambient sensor scaling max44000: Initial triggered buffer support drivers/iio/light/Kconfig | 11 + drivers/iio/light/Makefile | 1 + drivers/iio/light/max44000.c | 637 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 649 insertions(+) create mode 100644 drivers/iio/light/max44000.c -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
