On Thu, Apr 14, 2016 at 08:11:17PM +0530, Laxman Dewangan wrote: > Sometimes, thermal sensors like NCT thermistors are connected to > the ADC channel. The temperature is read by reading the voltage > across the sensor resistance via ADC and referring the lookup > table for ADC value to temperature. > > Add DT binding doc for the ADC based thermal sensor driver to > detail the DT property and provide the example for how to use it. > > Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx> > > --- > Changes from V1: > - Make the lookup table to two dimensional instead of single array of linear > step of temperature. > - Remove detailing of IIO frameowrk and drivers. > - Added proper braces, indenting and labels. > > Changes from V2: > - Handle comment from Rob for detailing the first and second value of the array > and remove @ in the node name. > > .../bindings/thermal/thermal-generic-adc.txt | 89 ++++++++++++++++++++++ > 1 file changed, 89 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt Acked-by: Rob Herring <rob@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
