These chips have an almost identical interface but support a different number of value bits. Datasheet links for comparison: * http://www.ti.com/lit/ds/symlink/adc081c021.pdf * http://www.ti.com/lit/ds/symlink/adc101c021.pdf * http://www.ti.com/lit/ds/symlink/adc121c021.pdf Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx> --- drivers/iio/adc/Kconfig | 6 +++--- drivers/iio/adc/ti-adc081c.c | 51 ++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 50 insertions(+), 7 deletions(-) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 5937030..25378c5 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -385,11 +385,11 @@ config ROCKCHIP_SARADC module will be called rockchip_saradc. config TI_ADC081C - tristate "Texas Instruments ADC081C021/027" + tristate "Texas Instruments ADC081C/ADC101C/ADC121C family" depends on I2C help - If you say yes here you get support for Texas Instruments ADC081C021 - and ADC081C027 ADC chips. + If you say yes here you get support for Texas Instruments ADC081C, + ADC101C and ADC121C ADC chips. This driver can also be built as a module. If so, the module will be called ti-adc081c. diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index ecbc121..b977340 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -1,9 +1,21 @@ /* + * TI ADC081C/ADC101C/ADC121C 8/10/12-bit ADC driver + * * Copyright (C) 2012 Avionic Design GmbH + * Copyright (C) 2016 Intel * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * Datasheets: + * http://www.ti.com/lit/ds/symlink/adc081c021.pdf + * http://www.ti.com/lit/ds/symlink/adc101c021.pdf + * http://www.ti.com/lit/ds/symlink/adc121c021.pdf + * + * The devices have a very similar interface and differ mostly in the number of + * bits handled. For the 8-bit and 10-bit models the least-significant 4 or 2 + * bits of value registers are reserved. */ #include <linux/err.h> @@ -17,6 +29,9 @@ struct adc081c { struct i2c_client *i2c; struct regulator *ref; + + /* 8, 10 or 12 */ + int bits; }; #define REG_CONV_RES 0x00 @@ -34,7 +49,7 @@ static int adc081c_read_raw(struct iio_dev *iio, if (err < 0) return err; - *value = (err >> 4) & 0xff; + *value = (err & 0xFFF) >> (12 - adc->bits); return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: @@ -43,7 +58,7 @@ static int adc081c_read_raw(struct iio_dev *iio, return err; *value = err / 1000; - *shift = 8; + *shift = adc->bits; return IIO_VAL_FRACTIONAL_LOG2; @@ -60,6 +75,28 @@ static const struct iio_chan_spec adc081c_channel = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), }; +struct adcxx1c_model { + int bits; +}; + +#define ADCxx1C_MODEL(_bits) \ + { \ + .bits = (_bits), \ + } + +/* Model ids are indexes in _models array */ +enum adcxx1c_model_id { + ADC081C = 0, + ADC101C = 1, + ADC121C = 2, +}; + +static struct adcxx1c_model adcxx1c_models[] = { + ADCxx1C_MODEL( 8), + ADCxx1C_MODEL(10), + ADCxx1C_MODEL(12), +}; + static const struct iio_info adc081c_info = { .read_raw = adc081c_read_raw, .driver_module = THIS_MODULE, @@ -70,6 +107,7 @@ static int adc081c_probe(struct i2c_client *client, { struct iio_dev *iio; struct adc081c *adc; + struct adcxx1c_model *model = &adcxx1c_models[id->driver_data]; int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) @@ -81,6 +119,7 @@ static int adc081c_probe(struct i2c_client *client, adc = iio_priv(iio); adc->i2c = client; + adc->bits = model->bits; adc->ref = devm_regulator_get(&client->dev, "vref"); if (IS_ERR(adc->ref)) @@ -124,7 +163,9 @@ static int adc081c_remove(struct i2c_client *client) } static const struct i2c_device_id adc081c_id[] = { - { "adc081c", 0 }, + { "adc081c", ADC081C }, + { "adc101c", ADC101C }, + { "adc121c", ADC121C }, { } }; MODULE_DEVICE_TABLE(i2c, adc081c_id); @@ -132,6 +173,8 @@ MODULE_DEVICE_TABLE(i2c, adc081c_id); #ifdef CONFIG_OF static const struct of_device_id adc081c_of_match[] = { { .compatible = "ti,adc081c" }, + { .compatible = "ti,adc101c" }, + { .compatible = "ti,adc121c" }, { } }; MODULE_DEVICE_TABLE(of, adc081c_of_match); @@ -149,5 +192,5 @@ static struct i2c_driver adc081c_driver = { module_i2c_driver(adc081c_driver); MODULE_AUTHOR("Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>"); -MODULE_DESCRIPTION("Texas Instruments ADC081C021/027 driver"); +MODULE_DESCRIPTION("Texas Instruments ADC081C/ADC101C/ADC121C driver"); MODULE_LICENSE("GPL v2"); -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
