[PATCH v3] hp206c: Initial support for reading sensor values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Differences from last version are mostly based on Peter's review.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
---
 drivers/iio/pressure/Kconfig  |  10 +
 drivers/iio/pressure/Makefile |   1 +
 drivers/iio/pressure/hp206c.c | 427 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 438 insertions(+)
 create mode 100644 drivers/iio/pressure/hp206c.c

diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 31c0e1f..8de0192 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -148,4 +148,14 @@ config T5403
 	  To compile this driver as a module, choose M here: the module
 	  will be called t5403.
 
+config HP206C
+	tristate "HOPERF HP206C precision barometer and altimeter sensor"
+	depends on I2C
+	help
+	  Say yes here to build support for the HOPREF HP206C precision
+	  barometer and altimeter sensor.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called hp206c.
+
 endmenu
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index d336af1..6e60863 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
 st_pressure-y := st_pressure_core.o
 st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
 obj-$(CONFIG_T5403) += t5403.o
+obj-$(CONFIG_HP206C) += hp206c.o
 
 obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
 obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o
diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c
new file mode 100644
index 0000000..9f15b88
--- /dev/null
+++ b/drivers/iio/pressure/hp206c.c
@@ -0,0 +1,427 @@
+/*
+ * hp206c.c - HOPERF HP206C precision barometer and altimeter sensor
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x76)
+ *
+ * Datasheet:
+ *  http://www.hoperf.com/upload/sensor/HP206C_DataSheet_EN_V2.0.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/delay.h>
+#include <linux/util_macros.h>
+#include <linux/acpi.h>
+
+/* I2C commands: */
+#define HP206C_CMD_SOFT_RST	0x06
+
+#define HP206C_CMD_ADC_CVT	0x40
+
+#define HP206C_CMD_ADC_CVT_OSR_4096	0x00
+#define HP206C_CMD_ADC_CVT_OSR_2048	0x04
+#define HP206C_CMD_ADC_CVT_OSR_1024	0x08
+#define HP206C_CMD_ADC_CVT_OSR_512	0x0c
+#define HP206C_CMD_ADC_CVT_OSR_256	0x10
+#define HP206C_CMD_ADC_CVT_OSR_128	0x14
+
+#define HP206C_CMD_ADC_CVT_CHNL_PT	0x00
+#define HP206C_CMD_ADC_CVT_CHNL_T	0x02
+
+#define HP206C_CMD_READ_P	0x30
+#define HP206C_CMD_READ_T	0x32
+
+#define HP206C_CMD_READ_REG	0x80
+#define HP206C_CMD_WRITE_REG	0xc0
+
+#define HP206C_REG_INT_EN	0x0b
+#define HP206C_REG_INT_CFG	0x0c
+
+#define HP206C_REG_INT_SRC	0x0d
+#define HP206C_FLAG_DEV_RDY	0x40
+
+#define HP206C_REG_PARA		0x0f
+#define HP206C_FLAG_CMPS_EN	0x80
+
+/* Maximum spin for DEV_RDY */
+#define HP206C_MAX_DEV_RDY_WAIT_COUNT 20
+#define HP206C_DEV_RDY_WAIT_US    20000
+
+struct hp206c_data {
+	struct mutex mutex;
+	struct i2c_client *client;
+	int temp_osr_index;
+	int pres_osr_index;
+};
+
+struct hp206c_osr_setting {
+	u8 osr_mask;
+	unsigned int temp_conv_time_us;
+	unsigned int pres_conv_time_us;
+};
+
+/* Data from Table 5 in datasheet. */
+static const struct hp206c_osr_setting hp206c_osr_settings[] = {
+	{ HP206C_CMD_ADC_CVT_OSR_4096,	65600,	131100	},
+	{ HP206C_CMD_ADC_CVT_OSR_2048,	32800,	65600	},
+	{ HP206C_CMD_ADC_CVT_OSR_1024,	16400,	32800	},
+	{ HP206C_CMD_ADC_CVT_OSR_512,	8200,	16400	},
+	{ HP206C_CMD_ADC_CVT_OSR_256,	4100,	8200	},
+	{ HP206C_CMD_ADC_CVT_OSR_128,	2100,	4100	},
+};
+static const int hp206c_osr_rates[] = { 4096, 2048, 1024, 512, 256, 128 };
+static const char hp206c_osr_rates_str[] = "4096 2048 1024 512 256 128";
+
+static inline int hp206c_read_reg(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, HP206C_CMD_READ_REG | reg);
+}
+
+static inline int hp206c_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(client,
+			HP206C_CMD_WRITE_REG | reg, val);
+}
+
+static int hp206c_read_20bit(struct i2c_client *client, u8 cmd)
+{
+	int ret;
+	u8 values[3];
+
+	ret = i2c_smbus_read_i2c_block_data(client, cmd, 3, values);
+	if (ret < 0)
+		return ret;
+	if (ret != 3)
+		return -EIO;
+	return ((values[0] & 0xF) << 16) | (values[1] << 8) | (values[2]);
+}
+
+/* Spin for max 160ms until DEV_RDY is 1, or return error. */
+static int hp206c_wait_dev_rdy(struct iio_dev *indio_dev)
+{
+	int ret;
+	int count = 0;
+	struct hp206c_data *data = iio_priv(indio_dev);
+	struct i2c_client *client = data->client;
+
+	while (++count <= HP206C_MAX_DEV_RDY_WAIT_COUNT) {
+		ret = hp206c_read_reg(client, HP206C_REG_INT_SRC);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev, "Failed READ_REG INT_SRC: %d\n", ret);
+			return ret;
+		}
+		if (ret & HP206C_FLAG_DEV_RDY)
+			return 0;
+		usleep_range(HP206C_DEV_RDY_WAIT_US, HP206C_DEV_RDY_WAIT_US * 3 / 2);
+	}
+	return -ETIMEDOUT;
+}
+
+static int hp206c_set_compensation(struct i2c_client *client, bool enabled)
+{
+	int val;
+
+	val = hp206c_read_reg(client, HP206C_REG_PARA);
+	if (val < 0)
+		return val;
+	if (enabled)
+		val |= HP206C_FLAG_CMPS_EN;
+	else
+		val &= ~HP206C_FLAG_CMPS_EN;
+
+	return hp206c_write_reg(client, HP206C_REG_PARA, val);
+}
+
+/* Do a soft reset */
+static int hp206c_soft_reset(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct hp206c_data *data = iio_priv(indio_dev);
+	struct i2c_client *client = data->client;
+
+	ret = i2c_smbus_write_byte(client, HP206C_CMD_SOFT_RST);
+	if (ret) {
+		dev_err(&client->dev, "Failed to reset device: %d\n", ret);
+		return ret;
+	}
+
+	usleep_range(400, 600);
+
+	ret = hp206c_wait_dev_rdy(indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "Device not ready after soft reset: %d\n", ret);
+		return ret;
+	}
+
+	ret = hp206c_set_compensation(client, true);
+	if (ret)
+		dev_err(&client->dev, "Failed to enable compensation: %d\n", ret);
+	return ret;
+}
+
+static int hp206c_conv_and_read(struct iio_dev *indio_dev,
+				u8 conv_cmd, u8 read_cmd,
+				unsigned int sleep_us)
+{
+	int ret;
+	struct hp206c_data *data = iio_priv(indio_dev);
+	struct i2c_client *client = data->client;
+
+	ret = hp206c_wait_dev_rdy(indio_dev);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "Device not ready: %d\n", ret);
+		return ret;
+	}
+
+	ret = i2c_smbus_write_byte(client, conv_cmd);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "Failed convert: %d\n", ret);
+		return ret;
+	}
+
+	usleep_range(sleep_us, sleep_us * 3 / 2);
+
+	ret = hp206c_wait_dev_rdy(indio_dev);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "Device not ready: %d\n", ret);
+		return ret;
+	}
+
+	ret = hp206c_read_20bit(client, read_cmd);
+	if (ret < 0)
+		dev_err(&indio_dev->dev, "Failed read: %d\n", ret);
+
+	return ret;
+}
+
+static int hp206c_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan, int *val,
+			   int *val2, long mask)
+{
+	int ret;
+	struct hp206c_data *data = iio_priv(indio_dev);
+	const struct hp206c_osr_setting *osr_setting;
+	u8 conv_cmd;
+
+	mutex_lock(&data->mutex);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = hp206c_osr_rates[data->temp_osr_index];
+			ret = IIO_VAL_INT;
+			break;
+
+		case IIO_PRESSURE:
+			*val = hp206c_osr_rates[data->pres_osr_index];
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_TEMP:
+			osr_setting = &hp206c_osr_settings[data->temp_osr_index];
+			conv_cmd = HP206C_CMD_ADC_CVT |
+					osr_setting->osr_mask |
+					HP206C_CMD_ADC_CVT_CHNL_T;
+			ret = hp206c_conv_and_read(indio_dev,
+					conv_cmd,
+					HP206C_CMD_READ_T,
+					osr_setting->temp_conv_time_us);
+			if (ret >= 0) {
+				/* 20 significant bits are provided.
+				 * Extend sign over the rest.
+				 */
+				*val = sign_extend32(ret, 19);
+				ret = IIO_VAL_INT;
+			}
+			break;
+
+		case IIO_PRESSURE:
+			osr_setting = &hp206c_osr_settings[data->pres_osr_index];
+			conv_cmd = HP206C_CMD_ADC_CVT |
+					osr_setting->osr_mask |
+					HP206C_CMD_ADC_CVT_CHNL_PT;
+			ret = hp206c_conv_and_read(indio_dev,
+					conv_cmd,
+					HP206C_CMD_READ_P,
+					osr_setting->pres_conv_time_us);
+			if (ret >= 0) {
+				dev_err(&indio_dev->dev, "ret=%#08x\n", ret);
+				*val = ret;
+				ret = IIO_VAL_INT;
+			}
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = 0;
+			*val2 = 10000;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+
+		case IIO_PRESSURE:
+			*val = 0;
+			*val2 = 1000;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int hp206c_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	int ret = 0;
+	struct hp206c_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO)
+		return -EINVAL;
+	mutex_lock(&data->mutex);
+	switch (chan->type) {
+	case IIO_TEMP:
+		data->temp_osr_index = find_closest_descending(val,
+			hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates));
+		break;
+	case IIO_PRESSURE:
+		data->pres_osr_index = find_closest_descending(val,
+			hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates));
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static const struct iio_chan_spec hp206c_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	},
+	{
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	}
+};
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(hp206c_osr_rates_str);
+
+static struct attribute *hp206c_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group hp206c_attribute_group = {
+	.attrs = hp206c_attributes,
+};
+
+static const struct iio_info hp206c_info = {
+	.attrs = &hp206c_attribute_group,
+	.read_raw = hp206c_read_raw,
+	.write_raw = hp206c_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int hp206c_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct hp206c_data *data;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE |
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+		dev_err(&client->dev, "Adapter does not support "
+				"all required i2c functionality\n");
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->mutex);
+
+	indio_dev->info = &hp206c_info;
+	indio_dev->name = id->name;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = hp206c_channels;
+	indio_dev->num_channels = ARRAY_SIZE(hp206c_channels);
+
+	i2c_set_clientdata(client, indio_dev);
+
+	/* Do a soft reset on probe */
+	ret = hp206c_soft_reset(indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "Failed to reset on startup: %d\n", ret);
+		return -ENODEV;
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id hp206c_id[] = {
+	{"hp206c"},
+	{}
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id hp206c_acpi_match[] = {
+	{"HOP206C", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match);
+#endif
+
+static struct i2c_driver hp206c_driver = {
+	.probe = hp206c_probe,
+	.id_table = hp206c_id,
+	.driver = {
+		.name = "hp206c",
+		.acpi_match_table = ACPI_PTR(hp206c_acpi_match),
+	},
+};
+
+module_i2c_driver(hp206c_driver);
+
+MODULE_DESCRIPTION("HOPERF HP206C precision barometer and altimeter sensor");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@xxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
-- 
2.8.0.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux