The select/deselect_bypass duo writes the irq number into the interrupt
configuration register.
If there is a i2c slave device connected to the mpu (eg. a magnetometer)
then this can hinder interrupt delivery for the accelerometer and
gyroscope.
Set this register to the default configuration.
Signed-off-by: Adriana Reus <adriana.reus@xxxxxxxxx>
---
* No change since the previous submitted version
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 4 ++--
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 0852b7f..1121f4e 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -129,7 +129,7 @@ static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv,
if (!ret) {
st->powerup_count++;
ret = inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
- st->client->irq |
+ INV_MPU6050_INT_PIN_CFG |
INV_MPU6050_BIT_BYPASS_EN);
}
write_error:
@@ -147,7 +147,7 @@ static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap,
mutex_lock(&indio_dev->mlock);
/* It doesn't really mattter, if any of the calls fails */
inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
- st->client->irq);
+ INV_MPU6050_INT_PIN_CFG);
st->powerup_count--;
if (!st->powerup_count)
inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1,
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index db0a4a2..455b99d 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -185,6 +185,7 @@ struct inv_mpu6050_state {
#define INV_MPU6050_REG_INT_PIN_CFG 0x37
#define INV_MPU6050_BIT_BYPASS_EN 0x2
+#define INV_MPU6050_INT_PIN_CFG 0
/* init parameters */
#define INV_MPU6050_INIT_FIFO_RATE 50
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
