On Wed, Jan 27, 2016 at 12:56 AM, Matt Ranostay <mranostay@xxxxxxxxx> wrote: > On Tue, Jan 26, 2016 at 12:21 PM, Cristina Moraru > <cristina.moraru09@xxxxxxxxx> wrote: >> This patch adds support for Hoperf th02 humidity and >> temperature sensor as it uses same register definitions >> as si7005 >> >> th02 Datasheet: http://www.anglia-live.com/netalogue/pdfs/hrf/datasheets/TH02_V1.1.pdf >> >> Signed-off-by: Cristina Moraru <cristina.moraru09@xxxxxxxxx> >> --- >> drivers/iio/humidity/Kconfig | 3 ++- >> drivers/iio/humidity/si7005.c | 1 + >> 2 files changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig >> index c1f3a21..866dda1 100644 >> --- a/drivers/iio/humidity/Kconfig >> +++ b/drivers/iio/humidity/Kconfig >> @@ -43,7 +43,8 @@ config SI7005 >> humidity and temperature sensor. >> >> To compile this driver as a module, choose M here: the module >> - will be called si7005. >> + will be called si7005. This driver also >> + supports Hoperf TH02 Humidity and Temperature Sensor. > > This probably shouldn't be changing the Kconfig description. Since if > every driver added a line for each device/variant it supported > everything would get quite wordy. Wordy is good :). We usually add all the supported chips in the Kconfig. See for example entries for BMC150_ACCEL or IIO_ST_ACCEL_3AXIS. thanks, Daniel. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
