[PATCH] iio: qcom-spmi-vadc: One check less in vadc_measure_ref_points() after error detection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
Date: Sat, 26 Dec 2015 13:53:15 +0100

This issue was detected by using the Coccinelle software.

Move the jump label directly before the desired log statement
so that the variable "ret" does not need to be checked once more
after it was determined that a function call failed.

Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
---
 drivers/iio/adc/qcom-spmi-vadc.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index c2babe5..391eefa 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -424,7 +424,7 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
 	prop = vadc_get_channel(vadc, VADC_REF_1250MV);
 	ret = vadc_do_conversion(vadc, prop, &read_1);
 	if (ret)
-		goto err;
+		goto report_failure;
 
 	/* Try with buffered 625mV channel first */
 	prop = vadc_get_channel(vadc, VADC_SPARE1);
@@ -433,11 +433,11 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
 
 	ret = vadc_do_conversion(vadc, prop, &read_2);
 	if (ret)
-		goto err;
+		goto report_failure;
 
 	if (read_1 == read_2) {
 		ret = -EINVAL;
-		goto err;
+		goto report_failure;
 	}
 
 	vadc->graph[VADC_CALIB_ABSOLUTE].dy = read_1 - read_2;
@@ -447,23 +447,24 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
 	prop = vadc_get_channel(vadc, VADC_VDD_VADC);
 	ret = vadc_do_conversion(vadc, prop, &read_1);
 	if (ret)
-		goto err;
+		goto report_failure;
 
 	prop = vadc_get_channel(vadc, VADC_GND_REF);
 	ret = vadc_do_conversion(vadc, prop, &read_2);
 	if (ret)
-		goto err;
+		goto report_failure;
 
 	if (read_1 == read_2) {
 		ret = -EINVAL;
-		goto err;
+		goto report_failure;
 	}
 
 	vadc->graph[VADC_CALIB_RATIOMETRIC].dy = read_1 - read_2;
 	vadc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_2;
-err:
-	if (ret)
+	if (ret) {
+report_failure:
 		dev_err(vadc->dev, "measure reference points failed\n");
+	}
 
 	return ret;
 }
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux