On 16 December 2015 at 22:41, Nish Aravamudan <nish.aravamudan@xxxxxxxxx> wrote: > Hi Daniel, > > On Wed, Dec 16, 2015 at 1:43 AM, Daniel Baluta <daniel.baluta@xxxxxxxxx> wrote: >> On Tue, Dec 15, 2015 at 9:19 PM, Nish Aravamudan >> <nish.aravamudan@xxxxxxxxx> wrote: >>> So, I apologize in advance for this relatively vague report, but I'm fairly sure >>> the Yoga 900 has an accelerometer amongst other sensors (ambient light?) >>> exported over IIO. >>> >>> But, these sensors seem to not be updating at all with a 4.4-rc5+ kernel (a >>> set of patches from https://lkml.org/lkml/2015/11/30/441 applied to Linus' >>> tree). >>> >>> The odd part is at some point in messing with this, I'm fairly sure it did work! >>> That is, >>> >>> `watch -n 0.1 cat '/sys/bus/iio/devices/iio:device'*/*raw*` >> >> Can you send us a sample of the output? Also, would be >> good to identify the exact driver for accel. > > cat /sys/bus/iio/devices/iio:device*/*raw* > 65478 > 7 > 1023 > 0 > 0 > 0 > 100 > -539062 > -742187 > 1292968 > 1592 > 64932 > 2 > 275 > 0 0 0 0 > > Now, I should say that I distinctly remember at some point waving my > laptop around and seeing these values change ... but now they seem to > be "stuck". Maybe it's a hardware issue or something special that > WIndows does to leverage the IIO sensors? > >> Perhaps: cat /sys/bus/iio/devices/iio:device'*/name > > $ cat /sys/bus/iio/devices/iio:device*/name > accel_3d Can you list the directory of iio:device with this name (it is: drivers/iio/accel/hid-sensor-accel-3d.c). This is something you will be looking at for accel debugging, but it seems more like standard > gyro_3d > als > magn_3d > incli_3d > dev_rotation > > >>> >>> showed updating values as I moved the laptop around. >>> >>> I've not done any accelerometer debugging before, so any suggestion on >>> where to start would be greatly appreciated! >> >> Did you applied some patches and recompiled the kernel? Or when it did stopped >> working? > > As far as I can tell, it only worked that one one time and hasn't > since. Although your question does make me wonder *which* kernel I was > on that I experienced the values changing. Let me go back to a stock > 4.4-rc5 and see. Did you compile the stock kernel? It might be that .dts file you are using (or defconfig) is not correct. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html