On 11/12/15 11:50, Martin Kepplinger wrote: > Am 2015-12-09 um 10:24 schrieb Oliver Stäbler: >> Signed-off-by: Oliver Stäbler <oliver.staebler@xxxxxxxxxxxxxx> > > If the datasheet is publicly available, please link to it in the commit > message, so people can easily verify this. > > Seems ok though. Feel free to add > Reviewed-by: Martin Kepplinger <martink@xxxxxxxxx> > if you feel like it. Applied to the togreg branch of iio.git - will be initially pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > > thanks > martin > >> --- >> Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt | 4 ++-- >> drivers/iio/adc/Kconfig | 6 +++--- >> drivers/iio/adc/ti-adc128s052.c | 13 ++++++++++++- >> 3 files changed, 17 insertions(+), 6 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt >> index 15ca6b4..daa2b2c 100644 >> --- a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt >> +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt >> @@ -1,7 +1,7 @@ >> -* Texas Instruments' ADC128S052 and ADC122S021 ADC chip >> +* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip >> >> Required properties: >> - - compatible: Should be "ti,adc128s052" or "ti,adc122s021" >> + - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021" >> - reg: spi chip select number for the device >> - vref-supply: The regulator supply for ADC reference voltage >> >> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig >> index 7868c74..351bd11 100644 >> --- a/drivers/iio/adc/Kconfig >> +++ b/drivers/iio/adc/Kconfig >> @@ -324,11 +324,11 @@ config TI_ADC081C >> called ti-adc081c. >> >> config TI_ADC128S052 >> - tristate "Texas Instruments ADC128S052/ADC122S021" >> + tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" >> depends on SPI >> help >> - If you say yes here you get support for Texas Instruments ADC128S052 >> - and ADC122S021 chips. >> + If you say yes here you get support for Texas Instruments ADC128S052, >> + ADC122S021 and ADC124S021 chips. >> >> This driver can also be built as a module. If so, the module will be >> called ti-adc128s052. >> diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c >> index ff6f7f6..bc58867 100644 >> --- a/drivers/iio/adc/ti-adc128s052.c >> +++ b/drivers/iio/adc/ti-adc128s052.c >> @@ -1,10 +1,11 @@ >> /* >> * Copyright (C) 2014 Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx> >> * >> - * Driver for Texas Instruments' ADC128S052 and ADC122S021 ADC chip. >> + * Driver for Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip. >> * Datasheets can be found here: >> * http://www.ti.com/lit/ds/symlink/adc128s052.pdf >> * http://www.ti.com/lit/ds/symlink/adc122s021.pdf >> + * http://www.ti.com/lit/ds/symlink/adc124s021.pdf >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License version 2 as >> @@ -114,9 +115,17 @@ static const struct iio_chan_spec adc122s021_channels[] = { >> ADC128_VOLTAGE_CHANNEL(1), >> }; >> >> +static const struct iio_chan_spec adc124s021_channels[] = { >> + ADC128_VOLTAGE_CHANNEL(0), >> + ADC128_VOLTAGE_CHANNEL(1), >> + ADC128_VOLTAGE_CHANNEL(2), >> + ADC128_VOLTAGE_CHANNEL(3), >> +}; >> + >> static const struct adc128_configuration adc128_config[] = { >> { adc128s052_channels, ARRAY_SIZE(adc128s052_channels) }, >> { adc122s021_channels, ARRAY_SIZE(adc122s021_channels) }, >> + { adc124s021_channels, ARRAY_SIZE(adc124s021_channels) }, >> }; >> >> static const struct iio_info adc128_info = { >> @@ -177,6 +186,7 @@ static int adc128_remove(struct spi_device *spi) >> static const struct of_device_id adc128_of_match[] = { >> { .compatible = "ti,adc128s052", }, >> { .compatible = "ti,adc122s021", }, >> + { .compatible = "ti,adc124s021", }, >> { /* sentinel */ }, >> }; >> MODULE_DEVICE_TABLE(of, adc128_of_match); >> @@ -184,6 +194,7 @@ MODULE_DEVICE_TABLE(of, adc128_of_match); >> static const struct spi_device_id adc128_id[] = { >> { "adc128s052", 0}, /* index into adc128_config */ >> { "adc122s021", 1}, >> + { "adc124s021", 2}, >> { } >> }; >> MODULE_DEVICE_TABLE(spi, adc128_id); >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
