On Wed, Dec 2, 2015 at 2:52 AM, Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx> wrote: > >> MAX30100 is an heart rate and pulse oximeter sensor that works using >> two LEDS of different wavelengths, and detecting the light reflected >> back. >> >> This patchset adds support for both IR and RED LED channels which can >> be processed in userspace to determine heart rate and blood oxygen >> levels. > > I'd appreciate if you could incoporate my comments dated Nov. 20, > http://article.gmane.org/gmane.linux.kernel.iio/20983 > > mostly nitpicking... Will do in v5. Thanks, Matt > >> Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx> >> --- >> .../devicetree/bindings/iio/health/max30100.txt | 21 + >> drivers/iio/Kconfig | 1 + >> drivers/iio/Makefile | 1 + >> drivers/iio/health/Kconfig | 21 + >> drivers/iio/health/Makefile | 7 + >> drivers/iio/health/max30100.c | 454 +++++++++++++++++++++ >> 6 files changed, 505 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iio/health/max30100.txt >> create mode 100644 drivers/iio/health/Kconfig >> create mode 100644 drivers/iio/health/Makefile >> create mode 100644 drivers/iio/health/max30100.c >> >> diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt >> new file mode 100644 >> index 0000000..9f1d864 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/health/max30100.txt >> @@ -0,0 +1,21 @@ >> +Maxim MAX30100 heart rate and pulse oximeter sensor >> + >> +* https://datasheets.maximintegrated.com/en/ds/MAX30100.pdf >> + >> +Required properties: >> + - compatible: must be "maxim,max30100" >> + - reg: the I2c address of the sensor >> + - interrupt-parent: should be the phandle for the interrupt controller >> + - interrupts : the sole interrupt generated by the device >> + >> + Refer to interrupt-controller/interrupts.txt for generic >> + interrupt client node bindings. >> + >> +Example: >> + >> +max30100@057 { >> + compatible = "maxim,max30100"; >> + reg = <57>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <16 2>; >> +}; >> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig >> index 5dfb4f1..b846873 100644 >> --- a/drivers/iio/Kconfig >> +++ b/drivers/iio/Kconfig >> @@ -68,6 +68,7 @@ source "drivers/iio/common/Kconfig" >> source "drivers/iio/dac/Kconfig" >> source "drivers/iio/frequency/Kconfig" >> source "drivers/iio/gyro/Kconfig" >> +source "drivers/iio/health/Kconfig" >> source "drivers/iio/humidity/Kconfig" >> source "drivers/iio/imu/Kconfig" >> source "drivers/iio/light/Kconfig" >> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile >> index dc73c1f..7371791 100644 >> --- a/drivers/iio/Makefile >> +++ b/drivers/iio/Makefile >> @@ -20,6 +20,7 @@ obj-y += common/ >> obj-y += dac/ >> obj-y += gyro/ >> obj-y += frequency/ >> +obj-y += health/ >> obj-y += humidity/ >> obj-y += imu/ >> obj-y += light/ >> diff --git a/drivers/iio/health/Kconfig b/drivers/iio/health/Kconfig >> new file mode 100644 >> index 0000000..30d4ca0 >> --- /dev/null >> +++ b/drivers/iio/health/Kconfig >> @@ -0,0 +1,21 @@ >> +# >> +# Health sensors >> +# >> +# When adding new entries keep the list in alphabetical order >> + >> +menu "Health sensors" >> + >> +config MAX30100 >> + tristate "MAX30100 heart rate and pulse oximeter sensor" >> + depends on I2C >> + select REGMAP_I2C >> + select IIO_BUFFER >> + select IIO_KFIFO_BUF >> + help >> + Say Y here to build I2C interface support for the Maxim >> + MAX30100 heart rate, and pulse oximeter sensor. >> + >> + To compile this driver as a module, choose M here: the >> + module will be called max30100 >> + >> +endmenu >> diff --git a/drivers/iio/health/Makefile b/drivers/iio/health/Makefile >> new file mode 100644 >> index 0000000..7c475d7 >> --- /dev/null >> +++ b/drivers/iio/health/Makefile >> @@ -0,0 +1,7 @@ >> +# >> +# Makefile for IIO Health sensors >> +# >> + >> +# When adding new entries keep the list in alphabetical order >> + >> +obj-$(CONFIG_MAX30100) += max30100.o >> diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c >> new file mode 100644 >> index 0000000..11be88c >> --- /dev/null >> +++ b/drivers/iio/health/max30100.c >> @@ -0,0 +1,454 @@ >> +/* >> + * max30100.c - Support for MAX30100 heart rate and pulse oximeter sensor >> + * >> + * Copyright (C) 2015 Matt Ranostay <mranostay@xxxxxxxxx> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * TODO: allow LED current and pulse length controls via device tree properties >> + */ >> + >> +#include <linux/module.h> >> +#include <linux/init.h> >> +#include <linux/interrupt.h> >> +#include <linux/delay.h> >> +#include <linux/err.h> >> +#include <linux/irq.h> >> +#include <linux/i2c.h> >> +#include <linux/mutex.h> >> +#include <linux/regmap.h> >> +#include <linux/iio/iio.h> >> +#include <linux/iio/buffer.h> >> +#include <linux/iio/kfifo_buf.h> >> + >> +#define MAX30100_REGMAP_NAME "max30100_regmap" >> +#define MAX30100_DRV_NAME "max30100" >> + >> +#define MAX30100_REG_INT_STATUS 0x00 >> +#define MAX30100_REG_INT_STATUS_PWR_RDY BIT(0) >> +#define MAX30100_REG_INT_STATUS_SPO2_RDY BIT(4) >> +#define MAX30100_REG_INT_STATUS_HR_RDY BIT(5) >> +#define MAX30100_REG_INT_STATUS_FIFO_RDY BIT(7) >> + >> +#define MAX30100_REG_INT_ENABLE 0x01 >> +#define MAX30100_REG_INT_ENABLE_SPO2_EN BIT(0) >> +#define MAX30100_REG_INT_ENABLE_HR_EN BIT(1) >> +#define MAX30100_REG_INT_ENABLE_FIFO_EN BIT(3) >> +#define MAX30100_REG_INT_ENABLE_MASK 0xf0 >> +#define MAX30100_REG_INT_ENABLE_MASK_SHIFT 4 >> + >> +#define MAX30100_REG_FIFO_WR_PTR 0x02 >> +#define MAX30100_REG_FIFO_OVR_CTR 0x03 >> +#define MAX30100_REG_FIFO_RD_PTR 0x04 >> +#define MAX30100_REG_FIFO_DATA 0x05 >> +#define MAX30100_REG_FIFO_DATA_ENTRY_LEN 4 >> + >> +#define MAX30100_REG_MODE_CONFIG 0x06 >> +#define MAX30100_REG_MODE_CONFIG_MODE_SPO2_EN BIT(0) >> +#define MAX30100_REG_MODE_CONFIG_MODE_HR_EN BIT(1) >> +#define MAX30100_REG_MODE_CONFIG_MODE_MASK 0x03 >> +#define MAX30100_REG_MODE_CONFIG_TEMP_EN BIT(3) >> +#define MAX30100_REG_MODE_CONFIG_PWR BIT(7) >> + >> +#define MAX30100_REG_SPO2_CONFIG 0x07 >> +#define MAX30100_REG_SPO2_CONFIG_HI_RES_EN BIT(6) >> + >> +#define MAX30100_REG_SPO2_CONFIG_100HZ BIT(2) >> +#define MAX30100_REG_SPO2_CONFIG_1600US 0x3 >> + >> +#define MAX30100_REG_LED_CONFIG 0x09 >> +#define MAX30100_REG_LED_CONFIG_RED_LED_SHIFT 4 >> + >> +#define MAX30100_REG_LED_CONFIG_24MA 0x07 >> +#define MAX30100_REG_LED_CONFIG_50MA 0x0f >> + >> +#define MAX30100_REG_TEMP_INTEGER 0x16 >> +#define MAX30100_REG_TEMP_FRACTION 0x17 >> + >> +struct max30100_data { >> + struct i2c_client *client; >> + struct iio_dev *indio_dev; >> + struct mutex lock; >> + struct regmap *regmap; >> + >> + u8 buffer[4]; /* 4 8-bit channels */ >> +}; >> + >> +static bool max30100_is_volatile_reg(struct device *dev, unsigned int reg) >> +{ >> + switch (reg) { >> + case MAX30100_REG_INT_STATUS: >> + case MAX30100_REG_MODE_CONFIG: >> + case MAX30100_REG_FIFO_DATA: >> + case MAX30100_REG_TEMP_INTEGER: >> + case MAX30100_REG_TEMP_FRACTION: >> + return true; >> + default: >> + return false; >> + } >> +} >> + >> +static const struct regmap_config max30100_regmap_config = { >> + .name = MAX30100_REGMAP_NAME, >> + >> + .reg_bits = 8, >> + .val_bits = 8, >> + >> + .max_register = MAX30100_REG_TEMP_FRACTION, >> + .cache_type = REGCACHE_FLAT, >> + >> + .volatile_reg = max30100_is_volatile_reg, >> +}; >> + >> +static const unsigned long max30100_scan_masks[] = {0x3, 0}; >> + >> +static const struct iio_chan_spec max30100_channels[] = { >> + { >> + .type = IIO_INTENSITY, >> + .channel2 = IIO_MOD_LIGHT_IR, >> + .modified = 1, >> + >> + .scan_index = 0, >> + .scan_type = { >> + .sign = 'u', >> + .realbits = 16, >> + .storagebits = 16, >> + .endianness = IIO_BE, >> + }, >> + }, >> + { >> + .type = IIO_INTENSITY, >> + .channel2 = IIO_MOD_LIGHT_RED, >> + .modified = 1, >> + >> + .scan_index = 1, >> + .scan_type = { >> + .sign = 'u', >> + .realbits = 16, >> + .storagebits = 16, >> + .endianness = IIO_BE, >> + }, >> + }, >> + { >> + .type = IIO_TEMP, >> + .info_mask_separate = >> + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), >> + .scan_index = -1, >> + }, >> +}; >> + >> +static int max30100_set_powermode(struct max30100_data *data, bool state) >> +{ >> + return regmap_update_bits(data->regmap, MAX30100_REG_MODE_CONFIG, >> + MAX30100_REG_MODE_CONFIG_PWR, >> + state ? 0 : MAX30100_REG_MODE_CONFIG_PWR); >> +} >> + >> +static int max30100_clear_fifo(struct max30100_data *data) >> +{ >> + int ret; >> + >> + ret = regmap_write(data->regmap, MAX30100_REG_FIFO_WR_PTR, 0); >> + if (ret) >> + return ret; >> + >> + ret = regmap_write(data->regmap, MAX30100_REG_FIFO_OVR_CTR, 0); >> + if (ret) >> + return ret; >> + >> + return regmap_write(data->regmap, MAX30100_REG_FIFO_RD_PTR, 0); >> +} >> + >> +static int max30100_buffer_postenable(struct iio_dev *indio_dev) >> +{ >> + struct max30100_data *data = iio_priv(indio_dev); >> + int ret; >> + >> + ret = max30100_set_powermode(data, true); >> + if (ret) >> + return ret; >> + >> + return max30100_clear_fifo(data); >> +} >> + >> +static int max30100_buffer_predisable(struct iio_dev *indio_dev) >> +{ >> + struct max30100_data *data = iio_priv(indio_dev); >> + >> + return max30100_set_powermode(data, false); >> +} >> + >> +static const struct iio_buffer_setup_ops max30100_buffer_setup_ops = { >> + .postenable = max30100_buffer_postenable, >> + .predisable = max30100_buffer_predisable, >> +}; >> + >> +static inline int max30100_fifo_is_empty(struct max30100_data *data) >> +{ >> + unsigned int val; >> + int ret; >> + >> + ret = regmap_read(data->regmap, MAX30100_REG_INT_STATUS, &val); >> + if (ret) >> + return ret; >> + >> + if (val & MAX30100_REG_INT_STATUS_FIFO_RDY) >> + return 15; >> + >> + return !!(val >> 4); >> +} >> + >> +static int max30100_read_measurement(struct max30100_data *data) >> +{ >> + int ret; >> + >> + ret = i2c_smbus_read_i2c_block_data(data->client, >> + MAX30100_REG_FIFO_DATA, >> + MAX30100_REG_FIFO_DATA_ENTRY_LEN, >> + (u8 *) &data->buffer); >> + >> + return (ret == MAX30100_REG_FIFO_DATA_ENTRY_LEN) ? 0 : ret; >> +} >> + >> +static irqreturn_t max30100_interrupt_handler(int irq, void *private) >> +{ >> + struct iio_dev *indio_dev = private; >> + struct max30100_data *data = iio_priv(indio_dev); >> + int ret, cnt = 0; >> + >> + mutex_lock(&data->lock); >> + >> + while (cnt-- || (cnt = max30100_fifo_is_empty(data) > 0)) { >> + ret = max30100_read_measurement(data); >> + if (ret) >> + goto err_read; >> + >> + iio_push_to_buffers(data->indio_dev, data->buffer); >> + } >> + >> +err_read: >> + mutex_unlock(&data->lock); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int max30100_chip_init(struct max30100_data *data) >> +{ >> + int ret; >> + >> + /* RED IR LED = 24mA, IR LED = 50mA */ >> + ret = regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, >> + (MAX30100_REG_LED_CONFIG_24MA << >> + MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) | >> + MAX30100_REG_LED_CONFIG_50MA); >> + if (ret) >> + return ret; >> + >> + /* enable hi-res SPO2 readings with 100 samples a second */ >> + ret = regmap_write(data->regmap, MAX30100_REG_SPO2_CONFIG, >> + MAX30100_REG_SPO2_CONFIG_HI_RES_EN | >> + MAX30100_REG_SPO2_CONFIG_100HZ | >> + MAX30100_REG_SPO2_CONFIG_1600US); >> + if (ret) >> + return ret; >> + >> + /* enable SPO2 mode */ >> + ret = regmap_update_bits(data->regmap, MAX30100_REG_MODE_CONFIG, >> + MAX30100_REG_MODE_CONFIG_MODE_MASK, >> + MAX30100_REG_MODE_CONFIG_MODE_HR_EN | >> + MAX30100_REG_MODE_CONFIG_MODE_SPO2_EN); >> + if (ret) >> + return ret; >> + >> + /* enable SPO2 + FIFO interrupts */ >> + return regmap_update_bits(data->regmap, MAX30100_REG_INT_ENABLE, >> + MAX30100_REG_INT_ENABLE_MASK, >> + (MAX30100_REG_INT_ENABLE_FIFO_EN | >> + MAX30100_REG_INT_ENABLE_SPO2_EN) >> + << MAX30100_REG_INT_ENABLE_MASK_SHIFT); >> +} >> + >> +static int max30100_read_temp(struct max30100_data *data, int *val) >> +{ >> + int ret; >> + unsigned int reg; >> + >> + ret = regmap_read(data->regmap, MAX30100_REG_TEMP_INTEGER, ®); >> + if (ret < 0) >> + return ret; >> + *val = reg << 4; >> + >> + ret = regmap_read(data->regmap, MAX30100_REG_TEMP_FRACTION, ®); >> + if (ret < 0) >> + return ret; >> + >> + *val |= reg & 0xf; >> + *val = sign_extend32(*val, 11); >> + >> + return 0; >> +} >> + >> +static int max30100_get_temp(struct max30100_data *data, int *val) >> +{ >> + int ret; >> + >> + /* start acquisition */ >> + ret = regmap_update_bits(data->regmap, MAX30100_REG_MODE_CONFIG, >> + MAX30100_REG_MODE_CONFIG_TEMP_EN, >> + MAX30100_REG_MODE_CONFIG_TEMP_EN); >> + if (ret) >> + return ret; >> + >> + usleep_range(35000, 50000); >> + >> + return max30100_read_temp(data, val); >> +} >> + >> +static int max30100_read_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int *val, int *val2, long mask) >> +{ >> + struct max30100_data *data = iio_priv(indio_dev); >> + int ret = -EINVAL; >> + >> + mutex_lock(&indio_dev->mlock); >> + >> + /* temperature reading can only be acquired while engine is running */ >> + if (!iio_buffer_enabled(indio_dev) && mask == IIO_CHAN_INFO_RAW) { >> + ret = -EAGAIN; >> + goto error_again; >> + } >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + ret = max30100_get_temp(data, val); >> + if (!ret) >> + ret = IIO_VAL_INT; >> + break; >> + case IIO_CHAN_INFO_SCALE: >> + *val = 1; /* 0.0625 */ >> + *val2 = 16; >> + ret = IIO_VAL_FRACTIONAL; >> + break; >> + } >> + >> +error_again: >> + mutex_unlock(&indio_dev->mlock); >> + >> + return ret; >> +} >> + >> +static const struct iio_info max30100_info = { >> + .driver_module = THIS_MODULE, >> + .read_raw = max30100_read_raw, >> +}; >> + >> +static int max30100_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + struct max30100_data *data; >> + struct iio_buffer *buffer; >> + struct iio_dev *indio_dev; >> + int ret; >> + >> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); >> + if (!indio_dev) >> + return -ENOMEM; >> + >> + buffer = devm_iio_kfifo_allocate(&client->dev); >> + if (!buffer) >> + return -ENOMEM; >> + >> + iio_device_attach_buffer(indio_dev, buffer); >> + >> + indio_dev->name = MAX30100_DRV_NAME; >> + indio_dev->channels = max30100_channels; >> + indio_dev->info = &max30100_info; >> + indio_dev->num_channels = ARRAY_SIZE(max30100_channels); >> + indio_dev->available_scan_masks = max30100_scan_masks; >> + indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE); >> + indio_dev->setup_ops = &max30100_buffer_setup_ops; >> + >> + data = iio_priv(indio_dev); >> + data->indio_dev = indio_dev; >> + data->client = client; >> + >> + mutex_init(&data->lock); >> + i2c_set_clientdata(client, indio_dev); >> + >> + data->regmap = devm_regmap_init_i2c(client, &max30100_regmap_config); >> + if (IS_ERR(data->regmap)) { >> + dev_err(&client->dev, "regmap initialization failed.\n"); >> + return PTR_ERR(data->regmap); >> + } >> + max30100_set_powermode(data, false); >> + >> + ret = max30100_chip_init(data); >> + if (ret) >> + goto error_out; >> + >> + if (client->irq <= 0) { >> + dev_err(&client->dev, "no valid irq defined\n"); >> + ret = -EINVAL; >> + goto error_out; >> + } >> + ret = devm_request_threaded_irq(&client->dev, client->irq, >> + NULL, max30100_interrupt_handler, >> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, >> + "max30100_irq", indio_dev); >> + if (ret) { >> + dev_err(&client->dev, "request irq (%d) failed\n", client->irq); >> + goto error_out; >> + } >> + >> + return iio_device_register(indio_dev); >> +error_out: >> + >> + return ret; >> +} >> + >> +static int max30100_remove(struct i2c_client *client) >> +{ >> + struct iio_dev *indio_dev = i2c_get_clientdata(client); >> + struct max30100_data *data = iio_priv(indio_dev); >> + >> + iio_device_unregister(indio_dev); >> + max30100_set_powermode(data, false); >> + >> + return 0; >> +} >> + >> +static const struct i2c_device_id max30100_id[] = { >> + { "max30100", 0 }, >> + {} >> +}; >> +MODULE_DEVICE_TABLE(i2c, max30100_id); >> + >> +static const struct of_device_id max30100_dt_ids[] = { >> + { .compatible = "maxim,max30100" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, max30100_dt_ids); >> + >> +static struct i2c_driver max30100_driver = { >> + .driver = { >> + .name = MAX30100_DRV_NAME, >> + .of_match_table = of_match_ptr(max30100_dt_ids), >> + }, >> + .probe = max30100_probe, >> + .remove = max30100_remove, >> + .id_table = max30100_id, >> +}; >> +module_i2c_driver(max30100_driver); >> + >> +MODULE_AUTHOR("Matt Ranostay <mranostay@xxxxxxxxx>"); >> +MODULE_DESCRIPTION("MAX30100 heart rate and pulse oximeter sensor"); >> +MODULE_LICENSE("GPL"); >> > > -- > > Peter Meerwald-Stadler > +43-664-2444418 (mobile) -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
