On Monday 23 November 2015 14:59:52 Lee Jones wrote:
> On Mon, 16 Nov 2015, Markus Pargmann wrote:
>
> > This documentation describes the devicetree bindings for the
> > ADC/Touchscreen unit of the i.MX25 SoC.
> >
> > Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> > Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> > ---
> >
> > Notes:
> > Changes in v6:
> > - Removed adc-ref property and replaced it with refp and refn for positive and
> > negative references. The properties are optional now as the default
> > behaviour is a positive internal reference voltage and ADC GND as negative
> > reference.
> >
> > .../devicetree/bindings/mfd/fsl-imx25-tsadc.txt | 46 ++++++++++++++++++++++
> > 1 file changed, 46 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> > new file mode 100644
> > index 000000000000..a857af0eb68c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> > @@ -0,0 +1,46 @@
> > +Freescale mx25 ADC/TSC multifunction device
>
> Prefer "MX25" and "MultiFunction Device (MFD)"
Fixed.
>
> > +This device combines two general purpose conversion queues one used for general
> > +ADC and the other used for touchscreens.
> > +
> > +Required properties:
> > + - compatible: Should be "fsl,imx25-tsadc".
> > + - reg: Memory range of the device.
>
> Not exactly. More like start location and size.
>
> > + - interrupts: Interrupt for this device as described in
> > + interrupts/interrupts.txt
>
> No such file. In any case, I'd prefer:
>
> "(See: ../interrupt-controller/interrupts.txt)".
>
> > + - clocks: An 'ipg' clock defined as described in clocks/clock.txt
>
> Didn't you check any of what you've written?
>
> "(See: ../clock/clock-bindings.txt)"
Seems I didn't check these, sorry.
>
> > + - interrupt-controller: This device is an interrupt controller. It controls
> > + the interrupts of both conversion queues.
> > + - #interrupt-cells: Should be '<1>'.
> > + - #address-cells: Should be '<1>'.
> > + - #size-cells: Should be '<1>'.
> > + - ranges
>
> ?
>
> Also, don't think think that this looks better/easier to read?
Yes a bit, changed it.
>
> > +Required properties:
> > + - compatible: Should be "fsl,imx25-tsadc".
> > + - reg: Memory range of the device.
> > + - interrupts: Interrupt for this device as described in
> > + interrupts/interrupts.txt
> > + - clocks: An 'ipg' clock defined as described in clocks/clock.txt
> > + - interrupt-controller: This device is an interrupt controller. It controls
> > + the interrupts of both conversion queues.
> > + - #interrupt-cells: Should be '<1>'.
> > + - #address-cells: Should be '<1>'.
> > + - #size-cells: Should be '<1>'.
>
> [...]
>
> > +This device includes two conversion queues which can be added as subnodes.
> > +The first queue is for the touchscreen, the second for general purpose ADC.
> > +
> > +Example:
> > + tscadc: tscadc@50030000 {
> > + compatible = "fsl,imx25-tsadc";
> > + reg = <0x50030000 0xc>;
> > + interrupts = <46>;
> > + clocks = <&clks 119>;
> > + clock-names = "ipg";
>
> I don't think this is required, if you only have a single clock.
I prefer this variation so that you immediately see what the clock is
for. The number is not terribly helpful.
Thanks,
Markus
>
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + tsc: tcq@50030400 {
> > + compatible = "fsl,imx25-tcq";
> > + reg = <0x50030400 0x60>;
> > + ...
> > + };
> > +
> > + adc: gcq@50030800 {
> > + compatible = "fsl,imx25-gcq";
> > + reg = <0x50030800 0x60>;
> > + ...
> > + };
> > + };
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: This is a digitally signed message part.
