Hi Lucas,
Adding linux-iio and linux-media, I hope you don't mind.
On 10/23/2015 06:58 PM, Lucas Magasweran wrote:
Hi Daniel,
My colleague, Roberto Cornetti, attended your IIO talk at LinuxCon
recently and is using the IIO subsystem for an I2C IMU.
Glad to hear that :)
My question is if IIO the appropriate subsystem for a thermal camera
sensor. The driver needs to acquire frames over SPI and configure the
sensor via I2C. It also has to respond to a GPIO interrupt to
synchronize with the camera.
I am not sure exactly about this. My feeling is that this should go with
the v4l subsystem thus Cc-ing linux-media.
Do you have any datasheet for this sensor?
At some point [1] we considered introducing the fingerprint sensor as an
IIO device, but that didn't quite fit. So, we reconsidered using v4l.
I this is your case too :).
Hope this helps.
Daniel.
[1] http://marc.info/?l=linux-kernel&m=141769805614596&w=2
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
