On 19 October 2015 at 14:56, Martin Kepplinger <martink@xxxxxxxxx> wrote: > Am 2015-10-19 um 14:34 schrieb Joachim Eastwood: >> Hi Martin, >> >> On 19 October 2015 at 13:10, Martin Kepplinger <martink@xxxxxxxxx> wrote: >>> Am 2015-10-18 um 00:25 schrieb Joachim Eastwood: >>>> Add support for Freescale MMA7455L 3-axis in 10-bit mode with both >>>> I2C and SPI bus support. This is a rather simple driver that >>>> currently doesn't support all the hardware features of MMA7455L. >>>> >>>> Tested on Embedded Artists' LPC4357 Dev Kit using I2C bus. >>>> >>>> Signed-off-by: Joachim Eastwood <manabian@xxxxxxxxx> >>>> --- >>> >>> Think about adding support for MMA7456L as well. What's the difference >>> between the two, except for the ID? >> >> I think the driver should work with MMA7456L as well. >> I have tried to figure out the difference between the two devices, but >> the Freescale doesn't list them. One another annoying thing is that >> the ID isn't actually stated in the data sheet (!). So for MMA7456L I >> would guess it is 0x56, but there is no way to be sure. >> > > You're right, that's messy. I asked freescale about it and we'll see > if/when there's an answer. ah, nice. Thanks for taking the time to doing that. regards, Joachim Eastwood -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
