The following changes since commit d0a76bbfe920e056e761bfcb77f3b95bd3bce98f:
staging: iio: iio_dummy_evgen: handle_simple_irq() build fix (2015-09-30 03:46:43 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.4b
for you to fetch changes up to 801ab33596f3e2a70a3b3599618d966736299014:
iio:light:apds9960 Fix sparse endian warnings. (2015-10-12 18:21:38 +0100)
----------------------------------------------------------------
Second set of new drivers, functionality and cleanups for IIO in the 4.4 cycle.
Core stuff
* adjust resistance documentation to allow for output devices.
New device support:
* bmc150
- split the i2c driver up into a core and i2c_regmap part including regmap
conversion.
- add spi support.
* mcp4531 digitial potentiometer driver.
* Measurement Specialties set of drivers with a core library module providing
common functionality. Note that the htu21 has a driver in hwmon, but the
view from that side was that, given the range of devices the same silicon
turns up in are not all typical hwmon material, that driver would be
deprecated in favour of this new support.
- ms8607 temperature, pressure and humidty sensor
- ms5637 temperature and pressure sensor
- htu21 temperature and humidity sensor
- tsys02d temperature sensor
- tsys01 temperature sensor
Cleanups
* tree wide.
- squish cases where irq 0 is still considered valid.
* apds9960
- sparse endian warning cleanups by making endianness explicit.
* ad5504
- leave group naming to the core.
* ad7746
- cleanup comment style.
- drop an unnecessary bit of dev_info
- add some appropriate uses of the BIT macro.
* ad799x
- leave group naming to the core.
* hdc100x - introduced this cycle,.
- fix a wrong offset value.
* lidar
- add missing MODULE_DEVICE_TABLE for dt.
* max1363
- leave sysfs group naming to the core.
* m62332 got the Harmut treatment and as ever he found a 'few' bits the
rest of us had missed!
- Share scale and offset attributes across channels.
- Shutdown the device on driver remove
- Use ARRAY_SIZE rather than a hard coded count for channels.
- Return more directly in the write_raw callback dropping a local variable
along the way.
- a few style issues
- move to reading the regulator voltage for each use allowing for dynamic
regulators. This is a common feature across drivers so we might end
up with more fixes throughout the tree for this.
* mlx96014 - introduced this cycle.
- fixed up a spot of error handling.
* vz89x - introduced this cycle.
- work around a hardware quirk.
----------------------------------------------------------------
Crt Mori (1):
iio: mlx96014: Error checking from positive to negative
Hartmut Knaack (6):
iio:dac:m62332: share scale and offset
iio:dac:m62332: shutdown on remove
iio:dac:m62332: use ARRAY_SIZE
iio:dac:m62332: drop unrequired variable
iio:dac:m62332: address some style issues
iio:dac:m62332: use dynamic scale
Hugo Camboulive (1):
staging: iio: adc: fix comment block coding style issue
Jonathan Cameron (2):
iio:measurement specialties core: Fix endian sparse warnings.
iio:light:apds9960 Fix sparse endian warnings.
Ludovic Tancerel (6):
Add meas-spec sensors common part
Add tsys01 meas-spec driver support
Add tsys02d meas-spec driver support
Add htu21 meas-spec driver support
Add ms5637 meas-spec driver support
Add ms8607 meas-spec driver support
Markus Pargmann (4):
iio: bmc150: Use i2c regmap
iio: bcm150: Remove i2c_client from private data
iio: bmc150: Split the driver into core and i2c
iio: bmc150: Add SPI driver
Martin Kepplinger (3):
iio: adc: ad799x: leave sysfs naming to the core
iio: adc: max1363: leave sysfs naming to the core
iio: dac: ad5504: leave sysfs naming to the core
Matt Ranostay (3):
iio: chemical: vz89x hardware i2c workaround
iio: lidar: add missing MODULE_DEVICE_TABLE for dt
iio: hdc100x: correct IIO_CHAN_INFO_OFFSET value
Octavian Purdila (2):
iio: fix drivers that use 0 as a valid IRQ in client->irq (part 2)
iio: remove gpio interrupt probing from drivers that use a single interrupt
Peter Rosin (2):
iio: resistance: Document that resistance can be output
iio: mcp4531: Driver for Microchip digital potentiometers
Shraddha Barke (2):
Staging: iio: cdc: Prefer using the BIT macro
Staging: iio: cdc: Remove unnecessary dev_info
Documentation/ABI/testing/sysfs-bus-iio | 12 +
Documentation/ABI/testing/sysfs-bus-iio-meas-spec | 8 +
MAINTAINERS | 6 +
drivers/iio/Kconfig | 1 +
drivers/iio/Makefile | 1 +
drivers/iio/accel/Kconfig | 14 +-
drivers/iio/accel/Makefile | 4 +-
.../accel/{bmc150-accel.c => bmc150-accel-core.c} | 407 +++++--------
drivers/iio/accel/bmc150-accel-i2c.c | 102 ++++
drivers/iio/accel/bmc150-accel-spi.c | 91 +++
drivers/iio/accel/bmc150-accel.h | 20 +
drivers/iio/accel/kxcjk-1013.c | 34 +-
drivers/iio/accel/mma9553.c | 29 -
drivers/iio/accel/stk8312.c | 30 +-
drivers/iio/accel/stk8ba50.c | 30 +-
drivers/iio/adc/ad799x.c | 1 -
drivers/iio/adc/max1363.c | 1 -
drivers/iio/chemical/vz89x.c | 23 +-
drivers/iio/common/Kconfig | 1 +
drivers/iio/common/Makefile | 1 +
drivers/iio/common/ms_sensors/Kconfig | 6 +
drivers/iio/common/ms_sensors/Makefile | 5 +
drivers/iio/common/ms_sensors/ms_sensors_i2c.c | 652 +++++++++++++++++++++
drivers/iio/common/ms_sensors/ms_sensors_i2c.h | 66 +++
drivers/iio/dac/ad5504.c | 1 -
drivers/iio/dac/m62332.c | 63 +-
drivers/iio/humidity/Kconfig | 13 +
drivers/iio/humidity/Makefile | 1 +
drivers/iio/humidity/hdc100x.c | 5 +-
drivers/iio/humidity/htu21.c | 253 ++++++++
drivers/iio/imu/kmx61.c | 28 -
drivers/iio/light/apds9960.c | 6 +-
drivers/iio/light/stk3310.c | 35 +-
drivers/iio/magnetometer/bmc150_magn.c | 29 -
drivers/iio/potentiometer/Kconfig | 20 +
drivers/iio/potentiometer/Makefile | 6 +
drivers/iio/potentiometer/mcp4531.c | 231 ++++++++
drivers/iio/pressure/Kconfig | 13 +
drivers/iio/pressure/Makefile | 1 +
drivers/iio/pressure/ms5637.c | 190 ++++++
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 1 +
drivers/iio/proximity/sx9500.c | 9 -
drivers/iio/temperature/Kconfig | 22 +
drivers/iio/temperature/Makefile | 2 +
drivers/iio/temperature/mlx90614.c | 14 +-
drivers/iio/temperature/tsys01.c | 230 ++++++++
drivers/iio/temperature/tsys02d.c | 191 ++++++
drivers/staging/iio/cdc/ad7746.c | 22 +-
48 files changed, 2390 insertions(+), 541 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-meas-spec
rename drivers/iio/accel/{bmc150-accel.c => bmc150-accel-core.c} (81%)
create mode 100644 drivers/iio/accel/bmc150-accel-i2c.c
create mode 100644 drivers/iio/accel/bmc150-accel-spi.c
create mode 100644 drivers/iio/accel/bmc150-accel.h
create mode 100644 drivers/iio/common/ms_sensors/Kconfig
create mode 100644 drivers/iio/common/ms_sensors/Makefile
create mode 100644 drivers/iio/common/ms_sensors/ms_sensors_i2c.c
create mode 100644 drivers/iio/common/ms_sensors/ms_sensors_i2c.h
create mode 100644 drivers/iio/humidity/htu21.c
create mode 100644 drivers/iio/potentiometer/Kconfig
create mode 100644 drivers/iio/potentiometer/Makefile
create mode 100644 drivers/iio/potentiometer/mcp4531.c
create mode 100644 drivers/iio/pressure/ms5637.c
create mode 100644 drivers/iio/temperature/tsys01.c
create mode 100644 drivers/iio/temperature/tsys02d.c
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
