On 28/08/15 22:59, Hartmut Knaack wrote:
> This device simply uses its Vcc as reference voltage, so the same scale
> applies for all channels. Also offset doesn't appear to be different for
> any channel. Represent this by switching these two attributes to
> info_mask_shared_by_type.
>
> Signed-off-by: Hartmut Knaack <knaack.h@xxxxxx>
Applied to the togreg branch of iio.git.
Thanks,
Jonathan
> ---
> Hope you don't mind too much, that I inserted an extra tab in the whole
> block rather than messing up style and cleaning it up later.
>
> drivers/iio/dac/m62332.c | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/iio/dac/m62332.c b/drivers/iio/dac/m62332.c
> index c23d7fa889ee..cffc0630ed32 100644
> --- a/drivers/iio/dac/m62332.c
> +++ b/drivers/iio/dac/m62332.c
> @@ -173,15 +173,15 @@ static const struct iio_info m62332_info = {
> .driver_module = THIS_MODULE,
> };
>
> -#define M62332_CHANNEL(chan) { \
> - .type = IIO_VOLTAGE, \
> - .indexed = 1, \
> - .output = 1, \
> - .channel = (chan), \
> - .datasheet_name = "CH" #chan, \
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> - BIT(IIO_CHAN_INFO_SCALE) | \
> - BIT(IIO_CHAN_INFO_OFFSET), \
> +#define M62332_CHANNEL(chan) { \
> + .type = IIO_VOLTAGE, \
> + .indexed = 1, \
> + .output = 1, \
> + .channel = (chan), \
> + .datasheet_name = "CH" #chan, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
> + BIT(IIO_CHAN_INFO_OFFSET), \
> }
>
> static const struct iio_chan_spec m62332_channels[M62332_CHANNELS] = {
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
