CHROMIUM: iio: Add Dyna-Image AP3223 ambient light and proximity driver Please remove CHROMIUM from the commit message. Consider using something like this: iio: light: Add Dyna-Image AP3223 ambient light and proximity driver On Mon, Sep 28, 2015 at 8:00 AM, Suresh Rajashekara <sureshraj@xxxxxxxxxx> wrote: > Minimal implementation. This is based on the driver provided by > the vendor (which wasn't in the IIO framework). Authors of the > driver from the vendor included > * John Huang <john.huang@xxxxxxxxxxxxxx> > * Templeton Tsai <templeton.tsai@xxxxxxxxxxxxxx> > * Vic Lee <Vic_Lee@xxxxxxxx> Please specify features supported by this driver. E.g: Minimal implementation with support for raw light and proximity readings. Also, please add a link to the datasheet if available. > > Signed-off-by: Suresh Rajashekara <sureshraj@xxxxxxxxxx> > --- > .../devicetree/bindings/iio/light/ap3223.txt | 18 + > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/iio/light/Kconfig | 10 + > drivers/iio/light/Makefile | 1 + > drivers/iio/light/ap3223.c | 394 +++++++++++++++++++++ > drivers/iio/light/ap3223.h | 227 ++++++++++++ > 6 files changed, 651 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/light/ap3223.txt DT bindings should be sent as a separate patch in the same patch series, with relevant DT people CC'ed (use ./scripts/get_maintainer.pl). > create mode 100644 drivers/iio/light/ap3223.c > create mode 100644 drivers/iio/light/ap3223.h > > diff --git a/Documentation/devicetree/bindings/iio/light/ap3223.txt b/Documentation/devicetree/bindings/iio/light/ap3223.txt > new file mode 100644 > index 0000000..b255d27 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/ap3223.txt > @@ -0,0 +1,18 @@ > +* Dyna Image AP3223 ambient light sensor and proximity sensor > + > +http://www.dyna-image.com/english/product/optical-sensor-detail.php?cpid=2&dpid=8 > + > +Required properties: > + > + - compatible : should be "dynaimage,ap3223" > + - reg : the I2C address of the sensor > + > +Example: > + > +ap3223@1c { > + compatible = "dynaimage,ap3223"; > + reg = <0x1c>; > + > + pinctrl-0 = <&ap3223_pins>; > + pinctrl-names = "default"; > +}; > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 5f20add..704da45 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -46,6 +46,7 @@ digilent Diglent, Inc. > dlg Dialog Semiconductor > dlink D-Link Corporation > dmo Data Modul AG > +dynaimage Dyna-Image > ebv EBV Elektronik > edt Emerging Display Technologies > elan Elan Microelectronic Corp. > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig > index ae68c64..5255aa2 100644 > --- a/drivers/iio/light/Kconfig > +++ b/drivers/iio/light/Kconfig > @@ -27,6 +27,16 @@ config AL3320A > To compile this driver as a module, choose M here: the > module will be called al3320a. > > +config AP3223 > + tristate "AP3223 ambient light and proximity sensor" Dyna Image AP3323 ... > + depends on I2C > + help > + Say Y here if you want to build a driver for the Dyna Image AP3223 > + ambient light and proximity sensor. > + > + To compile this driver as a module, choose M here: the > + module will be called ap3223. > + > config APDS9300 > tristate "APDS9300 ambient light sensor" > depends on I2C > diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile > index b12a516..13a74f9 100644 > --- a/drivers/iio/light/Makefile > +++ b/drivers/iio/light/Makefile > @@ -5,6 +5,7 @@ > # When adding new entries keep the list in alphabetical order > obj-$(CONFIG_ADJD_S311) += adjd_s311.o > obj-$(CONFIG_AL3320A) += al3320a.o > +obj-$(CONFIG_AP3223) += ap3223.o > obj-$(CONFIG_APDS9300) += apds9300.o > obj-$(CONFIG_CM32181) += cm32181.o > obj-$(CONFIG_CM3232) += cm3232.o > diff --git a/drivers/iio/light/ap3223.c b/drivers/iio/light/ap3223.c > new file mode 100644 > index 0000000..55bbcdd > --- /dev/null > +++ b/drivers/iio/light/ap3223.c > @@ -0,0 +1,394 @@ > +/* > + * ap3223.c Add a small description for this file or remove the comment. As it is now it doesn't make sense because we know the name of the file we are reading. > + * > + * Copyright (C) 2015 Google, Inc. > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Note about the original authors: > + * > + * The driver for AP3223 was originally distributed by dyna image in a > + * different framework. This driver uses code from that driver and converts > + * it to iio framework. The non-iio driver from dyna image is not available > + * online anywhere, so there is no reference for it here. However, that driver > + * is also GPLv2. The following is part of the header found in that file > + * (The GPL notice from the original header is removed) Was it an input driver? :) > + * > + * >> This file is part of the AP3223, AP3212C and AP3216C sensor driver. > + * >> AP3426 is combined proximity and ambient light sensor. > + * >> AP3216C is combined proximity, ambient light sensor and IRLED. > + * >> > + * >> Contact: John Huang <john.huang@xxxxxxxxxxxxxx> > + * >> Templeton Tsai <templeton.tsai@xxxxxxxxxxxxxx> > + * > + * Another author initials mentioned in that file was just YC (and no name). > + * > + * Not sure for what kernel version the driver from dyna image was written for. > + * Vic Lee <Vic_Lee@xxxxxxxx> made modifications to it to run on 3.14. > + */ > + > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/i2c.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > +#include <linux/mutex.h> > +#include <linux/delay.h> > +#include <linux/interrupt.h> Is this needed? > +#include <linux/of_gpio.h> > +#include <linux/timer.h> > +#include <linux/gpio.h> > +#include <linux/device.h> > + > +#include "ap3223.h" > + > +#define AP3223_DRV_NAME "ap3223" > + > +struct ap3223_data { > + struct i2c_client *client; > + u8 reg_cache[AP3223_NUM_CACHABLE_REGS]; Consider using regmap interface. > + int cali; > +}; > + > +static u8 ap3223_regs[AP3223_NUM_CACHABLE_REGS] = { > + 0x00, 0x01, 0x02, 0x06, 0x0A, > + 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, > + 0x10, 0x14, 0x1A, 0x1B, 0x1C, > + 0x1D, 0x20, 0x21, 0x22, 0x23, > + 0x24, 0x25, 0x26, 0x28, 0x29, > + 0x2A, 0x2B, 0x2C, 0x2D, 0x30, > + 0x32 > +}; > + > +static u8 init_reg_config[] = { > + 0x00, 0x03, > + 0x10, 0x20, > + 0X1A, 0xE8, > + 0x1B, 0x03, > + 0x1C, 0xD0, > + 0x1D, 0x07, > + 0x20, 0x04, > + 0x21, 0x03, > + 0x22, 0x01, > + 0x23, 0x03, > + 0x25, 0x0B, > + 0x2A, 0x64, > + 0x2C, 0xF4, > + 0x2D, 0x00 > +}; > + > +static int ap3223_range[] = { 65535, 16383, 4095, 1023 }; > + > +#define FIND_REG_IDX(addr, regs, idx) { \ > + int i; \ > + for (i = 0; i < sizeof(ap3223_regs); i++) { \ > + if (addr == regs[i]) { \ > + idx = i; \ > + break; \ > + } \ > + } \ > +} > + > +#define AP3223_LIGHT_CHANNEL { \ > + .type = IIO_LIGHT, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > +} > + > +#define AP3223_PROXIMITY_CHANNEL { \ > + .type = IIO_PROXIMITY, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > +} > + > +static const struct iio_chan_spec ap3223_channels[] = { > + AP3223_LIGHT_CHANNEL, > + AP3223_PROXIMITY_CHANNEL, > +}; > + > +static int __ap3223_read_reg(struct i2c_client *client, > + u32 reg, u8 mask, u8 shift) > +{ > + struct ap3223_data *data = iio_priv(i2c_get_clientdata(client)); > + u8 idx = 0xff; > + > + FIND_REG_IDX(reg, ap3223_regs, idx); > + > + return (data->reg_cache[idx] & mask) >> shift; > +} > + > +static int __ap3223_write_reg(struct i2c_client *client, > + u32 reg, u8 mask, u8 shift, u8 val) > +{ > + struct ap3223_data *data = iio_priv(i2c_get_clientdata(client)); > + int ret = 0; > + u8 tmp; > + u8 idx = 0xff; > + > + FIND_REG_IDX(reg, ap3223_regs, idx); > + > + if (idx >= sizeof(ap3223_regs)) > + return -EINVAL; > + > + tmp = data->reg_cache[idx]; > + tmp &= ~mask; > + tmp |= val << shift; > + > + ret = i2c_smbus_write_byte_data(client, reg, tmp); > + if (!ret) > + data->reg_cache[idx] = tmp; > + > + return ret; > +} > + > +static int ap3223_get_mode(struct i2c_client *client) > +{ > + return __ap3223_read_reg(client, AP3223_REG_SYS_CONF, > + AP3223_REG_SYS_CONF_MASK, > + AP3223_REG_SYS_CONF_SHIFT); > +} > + > +static int ap3223_set_mode(struct i2c_client *client, int mode) > +{ > + return __ap3223_write_reg(client, AP3223_REG_SYS_CONF, > + AP3223_REG_SYS_CONF_MASK, > + AP3223_REG_SYS_CONF_SHIFT, mode); > +} > + > +static int ap3223_get_range(struct i2c_client *client) > +{ > + u8 idx = __ap3223_read_reg(client, AP3223_REG_ALS_CONF, > + AP3223_ALS_RANGE_MASK, > + AP3223_ALS_RANGE_SHIFT); > + return ap3223_range[idx]; > +} > + > +static int ap3223_set_range(struct i2c_client *client, int range) > +{ > + return __ap3223_write_reg(client, AP3223_REG_ALS_CONF, > + AP3223_ALS_RANGE_MASK, > + AP3223_ALS_RANGE_SHIFT, range); > +} > + > +static int ap3223_get_adc_value(struct i2c_client *client) > +{ > + unsigned int lsb, msb, val; > + unsigned int tmp, range; > + struct ap3223_data *data = iio_priv(i2c_get_clientdata(client)); > + > + lsb = i2c_smbus_read_byte_data(client, AP3223_REG_ALS_DATA_LOW); > + No need for this empty line. > + if (lsb < 0) > + return lsb; > + > + msb = i2c_smbus_read_byte_data(client, AP3223_REG_ALS_DATA_HIGH); > + The same here Use i2c_smbus_read_word_data. > + if (msb < 0) > + return msb; > + > + range = ap3223_get_range(client); > + > + tmp = (((msb << 8) | lsb) * range) >> 16; > + tmp = tmp * data->cali / 100; > + val = tmp; > + > + return val; > +} > + > +static int ap3223_get_object(struct i2c_client *client) > +{ > + int val; > + > + val = i2c_smbus_read_byte_data(client, AP3223_OBJ_COMMAND); > + val &= AP3223_OBJ_MASK; > + > + return val >> AP3223_OBJ_SHIFT; > +} > + > +/* Software Reset */ > +static inline void ap3223_sw_reset(struct i2c_client *client) > +{ > + i2c_smbus_write_byte_data(client, 0x0, 0x4); > +} > + > +static int ap3223_init_client(struct i2c_client *client) > +{ > + struct ap3223_data *data = iio_priv(i2c_get_clientdata(client)); > + int i; > + > + dev_dbg(&client->dev, "AP3223 : Initializing Client ..\n"); > + > + /* Read all the registers once to fill the cache. > + * Even if one of the read fails, we consider the init failed */ > + for (i = 0; i < sizeof(ap3223_regs); i++) { > + int v = i2c_smbus_read_byte_data(client, ap3223_regs[i]); > + > + if (v < 0) > + return -ENODEV; > + > + data->reg_cache[i] = v; > + } > + > + /* set defaults */ > + ap3223_set_range(client, AP3223_ALS_RANGE_0); > + ap3223_set_mode(data->client, AP3223_SYS_DEV_DOWN); > + > + return 0; > +} > + > +static int ap3223_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val, > + int *val2, long mask) > +{ > + struct ap3223_data *data = iio_priv(indio_dev); > + > + switch (chan->type) { > + case IIO_LIGHT: > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + if (ap3223_get_mode(data->client) == > + AP3223_SYS_DEV_DOWN) { > + dev_err(&indio_dev->dev, > + "Please power up first\n"); > + return -EINVAL; > + } > + *val = ap3223_get_adc_value(data->client); > + return IIO_VAL_INT; > + } > + break; > + > + case IIO_PROXIMITY: > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + *val = ap3223_get_object(data->client); > + dev_info(&data->client->dev, > + "%s\n", *val ? "Object Near" : "Object Far"); > + return IIO_VAL_INT; > + } > + break; > + > + default: > + break; > + } > + return -EINVAL; > +} > + > +static const struct iio_info ap3223_info = { > + .driver_module = THIS_MODULE, > + .read_raw = ap3223_read_raw, > +}; > + > +static void ap3223_init_reg_config(struct i2c_client *client) > +{ > + int i; > + > + for (i = 0; i < sizeof(init_reg_config); i += 2) { > + __ap3223_write_reg(client, init_reg_config[i], 0xff, > + 0, init_reg_config[i + 1]); > + } > +} > + > +static int ap3223_init(struct ap3223_data *data) > +{ > + struct i2c_client *client = data->client; > + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); > + struct iio_dev *indio_dev = i2c_get_clientdata(data->client); > + int err = 0; > + > + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) { > + err = -EIO; > + goto exit_free_gpio; > + } > + > + ap3223_sw_reset(client); > + > + err = ap3223_init_client(client); > + if (err) > + goto exit_free; > + > + ap3223_init_reg_config(client); > + > + dev_info(&client->dev, "%s : driver enabled\n", AP3223_DRV_NAME); > + > + return 0; > + > +exit_free: > + devm_iio_device_free(&client->dev, indio_dev); > + > +exit_free_gpio: > + return err; > +} > + > +static int ap3223_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct ap3223_data *data; > + struct iio_dev *indio_dev; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + i2c_set_clientdata(client, indio_dev); > + data->client = client; > + > + data->cali = AP3223_DEFAULT_CAL; > + > + indio_dev->dev.parent = &client->dev; > + indio_dev->info = &ap3223_info; > + indio_dev->name = AP3223_DRV_NAME; > + indio_dev->channels = ap3223_channels; > + indio_dev->num_channels = ARRAY_SIZE(ap3223_channels); > + indio_dev->modes = INDIO_DIRECT_MODE; > + > + ret = ap3223_init(data); > + if (ret < 0) { > + dev_err(&client->dev, "ap3223 chip init failed\n"); > + return ret; > + } > + > + return devm_iio_device_register(&client->dev, indio_dev); > +} > + > +static int ap3223_remove(struct i2c_client *client) > +{ > + struct iio_dev *indio_dev = i2c_get_clientdata(client); > + struct ap3223_data *data = iio_priv(indio_dev); > + > + ap3223_sw_reset(data->client); > + ap3223_set_mode(data->client, 0); > + > + devm_iio_device_unregister(&client->dev, indio_dev); > + devm_iio_device_free(&client->dev, indio_dev); > + > + return 0; > +} > + > +static const struct i2c_device_id ap3223_id[] = { > + {AP3223_DRV_NAME, 0}, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, ap3223_id); > + > +static struct i2c_driver ap3223_driver = { > + .driver = { > + .name = AP3223_DRV_NAME, > + .owner = THIS_MODULE, > + }, > + .probe = ap3223_probe, > + .remove = ap3223_remove, > + .id_table = ap3223_id, > +}; > + > +module_i2c_driver(ap3223_driver); > + > +MODULE_AUTHOR("Suresh Rajashekara <sureshraj@xxxxxxxxxx>"); > +MODULE_DESCRIPTION("AP3223 Ambient Light and Proximity Sensor Driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/light/ap3223.h b/drivers/iio/light/ap3223.h > new file mode 100644 > index 0000000..0cc88e4 > --- /dev/null > +++ b/drivers/iio/light/ap3223.h > @@ -0,0 +1,227 @@ > +/* > + * ap3223.h > + * > + * Copyright (C) 2015 Google, Inc. > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Note about the original authors: > + * > + * The driver for AP3223 was originally distributed by dyna image in a > + * different framework. This driver uses code from that driver and converts > + * it to iio framework. The non-iio driver from dyna image is not available > + * online anywhere, so there is no reference for it here. However, that driver > + * is also GPLv2. The following is part of the header found in that file > + * (The GPL notice from the original header is removed) > + * > + * >> This file is part of the AP3223, AP3212C and AP3216C sensor driver. > + * >> AP3426 is combined proximity and ambient light sensor. > + * >> AP3216C is combined proximity, ambient light sensor and IRLED. > + * >> > + * >> Contact: John Huang <john.huang@xxxxxxxxxxxxxx> > + * >> Templeton Tsai <templeton.tsai@xxxxxxxxxxxxxx> > + * > + * Another author initials mentioned in that file was just YC (and no name). > + * > + * Not sure for what kernel version the driver from dyna image was written for. > + * Vic Lee <Vic_Lee@xxxxxxxx> made modifications to it to run on 3.14. > + */ > + > +#ifndef __AP3223_H__ > +#define __AP3223_H__ > + > +#include <linux/ioctl.h> > + > +#define AP3223_SUCCESS 0 > +#define AP3223_ERR_I2C -1 > +#define AP3223_ERR_STATUS -3 > +#define AP3223_ERR_SETUP_FAILURE -4 > +#define AP3223_ERR_GETGSENSORDATA -5 > +#define AP3223_ERR_IDENTIFICATION -6 > + > + > +#define AP3223_NUM_CACHABLE_REGS 31 > + > +/* No adjustment to lux value reading */ > +#define AP3223_DEFAULT_CAL 100 > + > +/* ap3223 control registers */ > +#define AP3223_REG_SYS_CONF 0x00 > +#define AP3223_REG_SYS_CONF_SHIFT (0) > +#define AP3223_REG_SYS_CONF_MASK 0x07 > + > +#define AP3223_REG_SYS_INTSTATUS 0x01 > +#define AP3223_REG_SYS_INT_SHIFT (0) > +#define AP3223_REG_SYS_INT_PS_SHIFT (1) > +#define AP3223_REG_SYS_INT_LS_SHIFT (0) > +#define AP3223_REG_SYS_INT_MASK 0x03 > +#define AP3223_REG_SYS_INT_PMASK 0x02 > +#define AP3223_REG_SYS_INT_AMASK 0x01 > + > +#define AP3223_OBJ_COMMAND 0x01 > +#define AP3223_OBJ_MASK 0x10 > +#define AP3223_OBJ_SHIFT (4) > + > +#define AP3223_REG_SYS_INTCTRL 0x02 > +#define AP3223_REG_SYS_WAITTIME 0x06 > + > +/* ap3223 data registers */ > +#define AP3223_REG_IR_DATA_LOW 0x0A > +#define AP3223_REG_IR_DATA_LOW_SHIFT (0) > +#define AP3223_REG_IR_DATA_LOW_MASK 0xFF > + > +#define AP3223_REG_IR_DATA_HIGH 0x0B > +#define AP3223_REG_IR_DATA_HIGH_SHIFT (0) > +#define AP3223_REG_IR_DATA_HIGH_MASK 0x03 > + > +#define AP3223_REG_ALS_DATA_LOW 0x0C > +#define AP3223_REG_ALS_DATA_HIGH 0x0D > + > +#define AP3223_REG_PS_DATA_LOW 0x0E > +#define AP3223_REG_PS_DATA_LOW_SHIFT (0) > +#define AL3223_REG_PS_DATA_LOW_MASK 0xFF > +#define AP3223_REG_PS_DATA_HIGH 0x0F > +#define AP3223_REG_PS_DATA_HIGH_SHIFT (0) > +#define AL3223_REG_PS_DATA_HIGH_MASK 0x03 > + > +#define AP3223_REG_ALS_CONF 0x10 /*ALS GAIN */ > + > +#define AP3223_REG_ALS_PERSIS 0x14 > +#define AP3223_REG_ALS_PERSIS_SHIFT (0) > +#define AP3223_REG_ALS_PERSIS_MASK 0x3F > +/* #define AP3223_REG_ALS_CAL 0x19 */ > + > +#define AP3223_REG_ALS_THDL_L 0x1A > +#define AP3223_REG_ALS_THDL_L_SHIFT (0) > +#define AP3223_REG_ALS_THDL_L_MASK 0xFF > + > +#define AP3223_REG_ALS_THDL_H 0x1B > +#define AP3223_REG_ALS_THDL_H_SHIFT (0) > +#define AP3223_REG_ALS_THDL_H_MASK 0xFF > + > +#define AP3223_REG_ALS_THDH_L 0x1C > +#define AP3223_REG_ALS_THDH_L_SHIFT (0) > +#define AP3223_REG_ALS_THDH_L_MASK 0xFF > + > +#define AP3223_REG_ALS_THDH_H 0x1D > +#define AP3223_REG_ALS_THDH_H_SHIFT (0) > +#define AP3223_REG_ALS_THDH_H_MASK 0xFF > + > + > +/* ap3223 PS CONFIG registers */ > +#define AP3223_REG_PS_CONF 0x20 /*PS GAIN */ > +#define AP3223_REG_PS_CONF_SHIFT (2) > +#define AP3223_REG_PS_CONF_MASK 0x0C > + > +#define AP3223_REG_PS_LEDD 0x21 /*PS LED DRIVER */ > +#define AP3223_REG_PS_LEDD_SHIFT (0) > +#define AP3223_REG_PS_LEDD_MASK 0x03 > + > +#define AP3223_REG_PS_IFORM 0x22 /* PS INT Mode */ > + > +#define AP3223_REG_PS_MEAN 0x23 > +#define AP3223_REG_PS_MEAN_SHIFT (0) > +#define AP3223_REG_PS_MEAN_MASK 0x03 > + > +#define AP3223_REG_PS_SMARTINT 0x24 /* PS Smart INT for low power */ > +#define AP3223_REG_PS_INTEGR 0x25 > +#define AP3223_REG_PS_PERSIS 0x26 > +#define AP3223_REG_PS_PERSIS_SHIFT (0) > +#define AP3223_REG_PS_PERSIS_MASK 0x3F > +#define AP3223_REG_PS_CAL_L 0x28 > +#define AP3223_REG_PS_CAL_L_SHIFT (0) > +#define AP3223_REG_PS_CAL_L_MASK 0xFF > +#define AP3223_REG_PS_CAL_H 0x29 > +#define AP3223_REG_PS_CAL_H_SHIFT (0) > +#define AP3223_REG_PS_CAL_H_MASK 0x01 > + > +#define AP3223_REG_PS_THDL_L 0x2A > +#define AP3223_REG_PS_THDL_L_SHIFT (0) > +#define AP3223_REG_PS_THDL_L_MASK 0xFF > + > +#define AP3223_REG_PS_THDL_H 0x2B > +#define AP3223_REG_PS_THDL_H_SHIFT (0) > +#define AP3223_REG_PS_THDL_H_MASK 0x03 > + > +#define AP3223_REG_PS_THDH_L 0x2C > +#define AP3223_REG_PS_THDH_L_SHIFT (0) > +#define AP3223_REG_PS_THDH_L_MASK 0xFF > + > +#define AP3223_REG_PS_THDH_H 0x2D > +#define AP3223_REG_PS_THDH_H_SHIFT (0) > +#define AP3223_REG_PS_THDH_H_MASK 0x03 > + > + > +/* SYSTEM MODE (AP3223_REG_SYS_CONF) */ > +#define AP3223_SYS_DEV_DOWN 0x00 > +#define AP3223_SYS_ALS_ENABLE 0x01 > +#define AP3223_SYS_PS_ENABLE 0x02 > +#define AP3223_SYS_ALS_PS_ENABLE 0x03 > +#define AP3223_SYS_DEV_RESET 0x04 > + > +/* INT FLAG BIT MASK */ > +#define AP3223_SYS_ALS_INT_TRI 0x01 > +#define AP3223_SYS_PS_INT_TRI 0x02 > +#define AP3223_SYS_PS_INT_OBJ 0x10 > +#define AP3223_SYS_PS_INT_IROV 0x20 > + > +/* INT CLEAN Mode */ > +#define AP3223_SYS_ICLEAN_AUTO 0x00 > +#define AP3223_SYS_ICLEAN_MANUAL 0x01 > + > +/* ALS CONFIG */ > +#define AP3223_ALS_RANGE_0 0x00 /* Full range 32768 lux(0.5lux/count) */ > +#define AP3223_ALS_RANGE_1 0x01 /* Full range 8192 lux */ > +#define AP3223_ALS_RANGE_2 0x02 /* Full range 2048 lux */ > +#define AP3223_ALS_RANGE_3 0x03 /* Full range 512 lux */ > +#define AP3223_ALS_RANGE_MASK 0x30 > +#define AP3223_ALS_RANGE_SHIFT (4) > +#define AP3223_ALS_PERSIST_MASK 0x0F > + > +/* PS CONFIG */ > +#define AP3223_PS_GAIN_1 0x00 /* PS resulation * 1 */ > +#define AP3223_PS_GAIN_2 0x01 /* PS resulation * 2 */ > +#define AP3223_PS_GAIN_4 0x02 /* PS resulation * 4 */ > +#define AP3223_PS_GAIN_8 0x03 /* PS resulation * 8 */ > +#define AP3223_PS_PERSIST_1 0x00 > +#define AP3223_PS_PERSIST_2 0x01 > +#define AP3223_PS_PERSIST_4 0x02 > +#define AP3223_PS_PERSIST_8 0x03 > + > +/* PS LED Control */ > +#define AP3223_PS_LED_P0 0x00 /* 0 puls */ > +#define AP3223_PS_LED_P1 0x01 /* 1 puls (default) */ > +#define AP3223_PS_LED_P2 0x02 /* 2 puls */ > +#define AP3223_PS_LED_P3 0x03 /* 3 puls */ > +#define AP3223_PS_DEIVER_167 0x00 /* 16.7% */ > +#define AP3223_PS_DEIVER_333 0x01 /* 33.3% */ > +#define AP3223_PS_DEIVER_667 0x02 /* 66.7% */ > +#define AP3223_PS_DEIVER_1000 0x03 /* 100% (default) */ > + > +/* PS MEAN */ > +#define AP3223_PS_MEAN_0 0x00 /* 5ms @2T */ > +#define AP3223_PS_MEAN_1 0x01 /* 9.6ms @2T */ > +#define AP3223_PS_MEAN_2 0x02 /* 14.1ms @2T */ > +#define AP3223_PS_MEAN_3 0x03 /* 18.7ms @2T */ > + > +#define DISABLE 0x00 > +#define ENABLE 0x01 > + > +/* PS Engineering Registers */ > +#define AP3223_REG_PS_DC_1 0x30 /* Only in Engineering chip, > + couldn't find in datasheet */ > +#define AP3223_REG_PS_DC_1_SHIFT (0) > +#define AP3223_REG_PS_DC_1_MASK 0xFF > +#define AP3223_REG_PS_DC_2 0x32 /* Only in Engineering chip, > + couldn't find in datasheet */ > +#define AP3223_REG_PS_DC_2_SHIFT (0) > +#define AP3223_REG_PS_DC_2_MASK 0xFF > + > +#endif /* __AP3223_H__ */ > -- > 2.6.0.rc2.230.g3dd15c0 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
