On 23/09/15 15:26, Peter Rosin wrote: > From: Peter Rosin <peda@xxxxxxxxxx> > > Add support for Microchip digital potentiometers and rheostats > MCP4531, MCP4532, MCP4551, MCP4552 > MCP4631, MCP4632, MCP4651, MCP4652 > > DEVICE Wipers Steps Resistor Opts (kOhm) i2c address > MCP4531 1 129 5, 10, 50, 100 010111x > MCP4532 1 129 5, 10, 50, 100 01011xx > MCP4551 1 257 5, 10, 50, 100 010111x > MCP4552 1 257 5, 10, 50, 100 01011xx > MCP4631 2 129 5, 10, 50, 100 0101xxx > MCP4632 2 129 5, 10, 50, 100 01011xx > MCP4651 2 257 5, 10, 50, 100 0101xxx > MCP4652 2 257 5, 10, 50, 100 01011xx > > Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22096b.pdf Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it. If anyone wants to add reviewed-by / acked-by then as I'll be rebasing sometime in next few days anyway there is still time! Jonathan > > Signed-off-by: Peter Rosin <peda@xxxxxxxxxx> > --- > MAINTAINERS | 6 + > drivers/iio/Kconfig | 1 + > drivers/iio/Makefile | 1 + > drivers/iio/potentiometer/Kconfig | 20 +++ > drivers/iio/potentiometer/Makefile | 6 + > drivers/iio/potentiometer/mcp4531.c | 231 +++++++++++++++++++++++++++++++++++ > 6 files changed, 265 insertions(+) > create mode 100644 drivers/iio/potentiometer/Kconfig > create mode 100644 drivers/iio/potentiometer/Makefile > create mode 100644 drivers/iio/potentiometer/mcp4531.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index b60e2b2369d2..27862156c7a7 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6600,6 +6600,12 @@ W: http://linuxtv.org > S: Maintained > F: drivers/media/radio/radio-maxiradio* > > +MCP4531 MICROCHIP DIGITAL POTENTIOMETER DRIVER > +M: Peter Rosin <peda@xxxxxxxxxx> > +L: linux-iio@xxxxxxxxxxxxxxx > +S: Maintained > +F: drivers/iio/potentiometer/mcp4531.c > + > MEDIA DRIVERS FOR RENESAS - VSP1 > M: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > L: linux-media@xxxxxxxxxxxxxxx > diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig > index 4011effe4c05..7cc87f322655 100644 > --- a/drivers/iio/Kconfig > +++ b/drivers/iio/Kconfig > @@ -73,6 +73,7 @@ source "drivers/iio/orientation/Kconfig" > if IIO_TRIGGER > source "drivers/iio/trigger/Kconfig" > endif #IIO_TRIGGER > +source "drivers/iio/potentiometer/Kconfig" > source "drivers/iio/pressure/Kconfig" > source "drivers/iio/proximity/Kconfig" > source "drivers/iio/temperature/Kconfig" > diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile > index 698afc2d17ce..121c814e366b 100644 > --- a/drivers/iio/Makefile > +++ b/drivers/iio/Makefile > @@ -23,6 +23,7 @@ obj-y += imu/ > obj-y += light/ > obj-y += magnetometer/ > obj-y += orientation/ > +obj-y += potentiometer/ > obj-y += pressure/ > obj-y += proximity/ > obj-y += temperature/ > diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig > new file mode 100644 > index 000000000000..fd75db73e582 > --- /dev/null > +++ b/drivers/iio/potentiometer/Kconfig > @@ -0,0 +1,20 @@ > +# > +# Potentiometer drivers > +# > +# When adding new entries keep the list in alphabetical order > + > +menu "Digital potentiometers" > + > +config MCP4531 > + tristate "Microchip MCP45xx/MCP46xx Digital Potentiometer driver" > + depends on I2C > + help > + Say yes here to build support for the Microchip > + MCP4531, MCP4532, MCP4551, MCP4552, > + MCP4631, MCP4632, MCP4651, MCP4652 > + digital potentiomenter chips. > + > + To compile this driver as a module, choose M here: the > + module will be called mcp4531. > + > +endmenu > diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile > new file mode 100644 > index 000000000000..8afe49227012 > --- /dev/null > +++ b/drivers/iio/potentiometer/Makefile > @@ -0,0 +1,6 @@ > +# > +# Makefile for industrial I/O potentiometer drivers > +# > + > +# When adding new entries keep the list in alphabetical order > +obj-$(CONFIG_MCP4531) += mcp4531.o > diff --git a/drivers/iio/potentiometer/mcp4531.c b/drivers/iio/potentiometer/mcp4531.c > new file mode 100644 > index 000000000000..a3f66874ee2e > --- /dev/null > +++ b/drivers/iio/potentiometer/mcp4531.c > @@ -0,0 +1,231 @@ > +/* > + * Industrial I/O driver for Microchip digital potentiometers > + * Copyright (c) 2015 Axentia Technologies AB > + * Author: Peter Rosin <peda@xxxxxxxxxx> > + * > + * Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22096b.pdf > + * > + * DEVID #Wipers #Positions Resistor Opts (kOhm) i2c address > + * mcp4531 1 129 5, 10, 50, 100 010111x > + * mcp4532 1 129 5, 10, 50, 100 01011xx > + * mcp4551 1 257 5, 10, 50, 100 010111x > + * mcp4552 1 257 5, 10, 50, 100 01011xx > + * mcp4631 2 129 5, 10, 50, 100 0101xxx > + * mcp4632 2 129 5, 10, 50, 100 01011xx > + * mcp4651 2 257 5, 10, 50, 100 0101xxx > + * mcp4652 2 257 5, 10, 50, 100 01011xx > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published by > + * the Free Software Foundation. > + */ > + > +#include <linux/module.h> > +#include <linux/i2c.h> > +#include <linux/err.h> > + > +#include <linux/iio/iio.h> > + > +struct mcp4531_cfg { > + int wipers; > + int max_pos; > + int kohms; > +}; > + > +enum mcp4531_type { > + MCP453x_502, > + MCP453x_103, > + MCP453x_503, > + MCP453x_104, > + MCP455x_502, > + MCP455x_103, > + MCP455x_503, > + MCP455x_104, > + MCP463x_502, > + MCP463x_103, > + MCP463x_503, > + MCP463x_104, > + MCP465x_502, > + MCP465x_103, > + MCP465x_503, > + MCP465x_104, > +}; > + > +static const struct mcp4531_cfg mcp4531_cfg[] = { > + [MCP453x_502] = { .wipers = 1, .max_pos = 128, .kohms = 5, }, > + [MCP453x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, }, > + [MCP453x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, }, > + [MCP453x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, }, > + [MCP455x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, }, > + [MCP455x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, }, > + [MCP455x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, }, > + [MCP455x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, }, > + [MCP463x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, }, > + [MCP463x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, }, > + [MCP463x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, }, > + [MCP463x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, }, > + [MCP465x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, }, > + [MCP465x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, }, > + [MCP465x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, }, > + [MCP465x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, }, > +}; > + > +#define MCP4531_WRITE (0 << 2) > +#define MCP4531_INCR (1 << 2) > +#define MCP4531_DECR (2 << 2) > +#define MCP4531_READ (3 << 2) > + > +#define MCP4531_WIPER_SHIFT (4) > + > +struct mcp4531_data { > + struct i2c_client *client; > + unsigned long devid; > +}; > + > +#define MCP4531_CHANNEL(ch) { \ > + .type = IIO_RESISTANCE, \ > + .indexed = 1, \ > + .output = 1, \ > + .channel = (ch), \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > +} > + > +static const struct iio_chan_spec mcp4531_channels[] = { > + MCP4531_CHANNEL(0), > + MCP4531_CHANNEL(1), > +}; > + > +static int mcp4531_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct mcp4531_data *data = iio_priv(indio_dev); > + int address = chan->channel << MCP4531_WIPER_SHIFT; > + s32 ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + ret = i2c_smbus_read_word_swapped(data->client, > + MCP4531_READ | address); > + if (ret < 0) > + return ret; > + *val = ret; > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SCALE: > + *val = 1000 * mcp4531_cfg[data->devid].kohms; > + *val2 = mcp4531_cfg[data->devid].max_pos; > + return IIO_VAL_FRACTIONAL; > + } > + > + return -EINVAL; > +} > + > +static int mcp4531_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + struct mcp4531_data *data = iio_priv(indio_dev); > + int address = chan->channel << MCP4531_WIPER_SHIFT; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + if (val > mcp4531_cfg[data->devid].max_pos || val < 0) > + return -EINVAL; > + break; > + default: > + return -EINVAL; > + } > + > + return i2c_smbus_write_byte_data(data->client, > + MCP4531_WRITE | address | (val >> 8), > + val & 0xff); > +} > + > +static const struct iio_info mcp4531_info = { > + .read_raw = mcp4531_read_raw, > + .write_raw = mcp4531_write_raw, > + .driver_module = THIS_MODULE, > +}; > + > +static int mcp4531_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct device *dev = &client->dev; > + unsigned long devid = id->driver_data; > + struct mcp4531_data *data; > + struct iio_dev *indio_dev; > + > + if (!i2c_check_functionality(client->adapter, > + I2C_FUNC_SMBUS_WORD_DATA)) { > + dev_err(dev, "SMBUS Word Data not supported\n"); > + return -EIO; > + } > + > + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + data = iio_priv(indio_dev); > + i2c_set_clientdata(client, indio_dev); > + data->client = client; > + data->devid = devid; > + > + indio_dev->dev.parent = dev; > + indio_dev->info = &mcp4531_info; > + indio_dev->channels = mcp4531_channels; > + indio_dev->num_channels = mcp4531_cfg[devid].wipers; > + indio_dev->name = client->name; > + > + return devm_iio_device_register(dev, indio_dev); > +} > + > +static const struct i2c_device_id mcp4531_id[] = { > + { "mcp4531-502", MCP453x_502 }, > + { "mcp4531-103", MCP453x_103 }, > + { "mcp4531-503", MCP453x_503 }, > + { "mcp4531-104", MCP453x_104 }, > + { "mcp4532-502", MCP453x_502 }, > + { "mcp4532-103", MCP453x_103 }, > + { "mcp4532-503", MCP453x_503 }, > + { "mcp4532-104", MCP453x_104 }, > + { "mcp4551-502", MCP455x_502 }, > + { "mcp4551-103", MCP455x_103 }, > + { "mcp4551-503", MCP455x_503 }, > + { "mcp4551-104", MCP455x_104 }, > + { "mcp4552-502", MCP455x_502 }, > + { "mcp4552-103", MCP455x_103 }, > + { "mcp4552-503", MCP455x_503 }, > + { "mcp4552-104", MCP455x_104 }, > + { "mcp4631-502", MCP463x_502 }, > + { "mcp4631-103", MCP463x_103 }, > + { "mcp4631-503", MCP463x_503 }, > + { "mcp4631-104", MCP463x_104 }, > + { "mcp4632-502", MCP463x_502 }, > + { "mcp4632-103", MCP463x_103 }, > + { "mcp4632-503", MCP463x_503 }, > + { "mcp4632-104", MCP463x_104 }, > + { "mcp4651-502", MCP465x_502 }, > + { "mcp4651-103", MCP465x_103 }, > + { "mcp4651-503", MCP465x_503 }, > + { "mcp4651-104", MCP465x_104 }, > + { "mcp4652-502", MCP465x_502 }, > + { "mcp4652-103", MCP465x_103 }, > + { "mcp4652-503", MCP465x_503 }, > + { "mcp4652-104", MCP465x_104 }, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, mcp4531_id); > + > +static struct i2c_driver mcp4531_driver = { > + .driver = { > + .name = "mcp4531", > + }, > + .probe = mcp4531_probe, > + .id_table = mcp4531_id, > +}; > + > +module_i2c_driver(mcp4531_driver); > + > +MODULE_AUTHOR("Peter Rosin <peda@xxxxxxxxxx>"); > +MODULE_DESCRIPTION("MCP4531 digital potentiometer"); > +MODULE_LICENSE("GPL"); > -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
