[PATCH 3/6] thermal: iio device for thermal sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This change registers temperature sensor in a thermal zone as an IIO
temperature device. This allows user space thermal application to fully
utilize IIO capability to read temperature events and samples.
The primary motivation for this change to improve performance for user
space thermal controllers like Linux thermal daemon or Intel® Dynamic
Platform and Thermal Framework (DPTF) for Chromium OS.
The current sysfs has several limitations, which forces the current
user space to use polling as the safe way. This polling causes performance
bottlenecks as some devices requires extremely aggressive response to
changing temperature conditions.
These are some limitations, which this change tries to address:
- Temperature reading via sysfs attribute, which needs conversion from
string to int
- No way to set threshold settings to avoid polling for temperature change
without using a RW passive trip point.
- Event notifications via slow kobject uevents, which needs parsing to id
the zone and read temperature
- Only pull interface from user space, kernel drivers can't send samples
- One sample at a time read from user space
These limitations can be addressed by registering temperature sensor
as an IIO device. IIO provides
- buffered access via /dev/iio:deviceX node with select/poll capability
- temperature thresholds setting via iio event thresholds
- Wait and receive events
- Able to use different external trigger (data ready indications) and push
samples to buffers

Next set of patches uses the IIO binding introduced in this patchset.
The iio device created during call to thermal_zone_device_register. Samples
are pushed to iio buffers when thermal_zone_device_update is called from
client drivers.

New thermal zone device callbacks:
It introduces three new callbacks for thermal client drivers:
get_threshold_temp: Get the current threshold temperature
set_threshold_temp: Set the current threshold temperature
check_notification_support: Inform that the client driver has asynchronous
notification mechanism. If it is then polling can be avoided for the
temperature sensor.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
 drivers/thermal/Kconfig       |  12 ++
 drivers/thermal/Makefile      |   1 +
 drivers/thermal/thermal_iio.c | 383 ++++++++++++++++++++++++++++++++++++++++++
 drivers/thermal/thermal_iio.h |  45 +++++
 include/linux/thermal.h       |  13 ++
 5 files changed, 454 insertions(+)
 create mode 100644 drivers/thermal/thermal_iio.c
 create mode 100644 drivers/thermal/thermal_iio.h

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 0390044..bc7836e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -29,6 +29,18 @@ config THERMAL_HWMON
 	  Say 'Y' here if you want all thermal sensors to
 	  have hwmon sysfs interface too.
 
+config THERMAL_IIO
+	bool
+	prompt "Thermal sensor from a zone as IIO sensor device"
+	select IIO
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  This will register thermal sensor in a zone as an IIO temperature
+	  sensor device.
+	  This will help user space thermal controllers to use IIO ABI to
+	  get events and buffered acces to temperature samples.
+
 config THERMAL_OF
 	bool
 	prompt "APIs to parse thermal data out of device tree"
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 26f1608..b72a28d 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -7,6 +7,7 @@ thermal_sys-y			+= thermal_core.o
 
 # interface to/from other layers providing sensors
 thermal_sys-$(CONFIG_THERMAL_HWMON)		+= thermal_hwmon.o
+thermal_sys-$(CONFIG_THERMAL_IIO)		+= thermal_iio.o
 thermal_sys-$(CONFIG_THERMAL_OF)		+= of-thermal.o
 
 # governors
diff --git a/drivers/thermal/thermal_iio.c b/drivers/thermal/thermal_iio.c
new file mode 100644
index 0000000..492eaff
--- /dev/null
+++ b/drivers/thermal/thermal_iio.c
@@ -0,0 +1,383 @@
+/*
+ * thermal iio interface driver
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/thermal.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+struct thermal_iio_data {
+	struct thermal_zone_device *tz;
+	struct iio_trigger *interrupt_trig;
+	struct iio_chan_spec *channels;
+	bool enable_trigger;
+	int temp_thres;
+	bool ev_enable_state;
+	struct mutex mutex;
+};
+
+static const struct iio_event_spec thermal_event = {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+				 BIT(IIO_EV_INFO_ENABLE)
+};
+
+static const struct iio_chan_spec thermal_iio_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_CPU,
+		}
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1)
+};
+
+static const struct iio_chan_spec thermal_iio_channels_with_events[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_CPU,
+		},
+		.event_spec = &thermal_event,
+		.num_event_specs = 1,
+
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1)
+};
+
+static int thermal_iio_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct thermal_iio_data *iio_data = iio_priv(indio_dev);
+	int temp;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = thermal_zone_get_temp(iio_data->tz, &temp);
+		if (!ret) {
+			*val = temp;
+			ret = IIO_VAL_INT;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static irqreturn_t thermal_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct thermal_iio_data *iio_data = iio_priv(indio_dev);
+	u32 buffer[4];
+	int temp;
+	int ret;
+
+	ret = thermal_zone_get_temp(iio_data->tz, &temp);
+	if (ret)
+		goto err_read;
+
+	*(u32 *)buffer = temp;
+	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+					   iio_get_time_ns());
+err_read:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int thermal_data_rdy_trigger_set_state(struct iio_trigger *trig,
+					      bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct thermal_iio_data *iio_data = iio_priv(indio_dev);
+	int ret = 0;
+
+	mutex_lock(&iio_data->mutex);
+	if (iio_data->tz->ops->set_notification_status) {
+		ret = iio_data->tz->ops->set_notification_status(iio_data->tz,
+								 state);
+		if (!ret)
+			iio_data->enable_trigger = state;
+	} else
+		iio_data->enable_trigger = state;
+	mutex_unlock(&iio_data->mutex);
+
+	return ret;
+}
+
+static int thermal_iio_validate_trigger(struct iio_dev *indio_dev,
+					struct iio_trigger *trig)
+{
+	struct thermal_iio_data *iio_data = iio_priv(indio_dev);
+
+	if (iio_data->interrupt_trig && iio_data->interrupt_trig != trig)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct iio_trigger_ops thermal_trigger_ops = {
+	.set_trigger_state = thermal_data_rdy_trigger_set_state,
+	.owner = THIS_MODULE,
+};
+
+static int thermal_iio_read_event(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  enum iio_event_info info,
+				  int *val, int *val2)
+{
+	struct thermal_iio_data *iio_data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&iio_data->mutex);
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		*val = iio_data->temp_thres;
+		ret = IIO_VAL_INT;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&iio_data->mutex);
+
+	return ret;
+}
+
+static int thermal_iio_write_event(struct iio_dev *indio_dev,
+				   const struct iio_chan_spec *chan,
+				   enum iio_event_type type,
+				   enum iio_event_direction dir,
+				   enum iio_event_info info,
+				   int val, int val2)
+{
+	struct thermal_iio_data *iio_data = iio_priv(indio_dev);
+	int ret = 0;
+
+	mutex_lock(&iio_data->mutex);
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		iio_data->temp_thres = val;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&iio_data->mutex);
+
+	return ret;
+}
+
+static int thermal_iio_read_event_config(struct iio_dev *indio_dev,
+					 const struct iio_chan_spec *chan,
+					 enum iio_event_type type,
+					 enum iio_event_direction dir)
+{
+	struct thermal_iio_data *iio_data = iio_priv(indio_dev);
+	bool state;
+
+	mutex_lock(&iio_data->mutex);
+	state = iio_data->ev_enable_state;
+	mutex_unlock(&iio_data->mutex);
+
+	return state;
+}
+
+static int thermal_iio_write_event_config(struct iio_dev *indio_dev,
+					  const struct iio_chan_spec *chan,
+					  enum iio_event_type type,
+					  enum iio_event_direction dir,
+					  int state)
+{
+	struct thermal_iio_data *iio_data = iio_priv(indio_dev);
+	int temp_thres;
+	int ret = 0;
+
+	mutex_lock(&iio_data->mutex);
+	if ((state && iio_data->ev_enable_state) ||
+	    (!state && !iio_data->ev_enable_state))
+		goto done_write_event;
+
+	if (state && !iio_data->temp_thres) {
+		ret = -EINVAL;
+		goto done_write_event;
+	}
+
+	if (state)
+		temp_thres = iio_data->temp_thres;
+	else
+		temp_thres = 0;
+
+	ret = iio_data->tz->ops->set_threshold_temp(iio_data->tz, 0,
+						    temp_thres);
+	if (ret)
+		goto done_write_event;
+
+	if (iio_data->tz->ops->set_notification_status) {
+		ret = iio_data->tz->ops->set_notification_status(iio_data->tz,
+								 state > 0);
+		if (!ret)
+			iio_data->ev_enable_state = state;
+	} else
+		iio_data->ev_enable_state = state;
+
+done_write_event:
+	mutex_unlock(&iio_data->mutex);
+
+	return ret;
+}
+
+static int thermal_iio_setup_trig(struct iio_trigger **iio_trig,
+				  struct thermal_zone_device *tz,
+				  const char *format)
+{
+	struct iio_trigger *trig;
+	int ret;
+
+	trig = devm_iio_trigger_alloc(&tz->device, format, tz->type,
+				      tz->indio_dev->id);
+	if (!trig) {
+		dev_err(&tz->device, "Trigger Allocate Failed\n");
+		return -ENOMEM;
+	}
+	trig->dev.parent = &tz->device;
+	trig->ops = &thermal_trigger_ops;
+	iio_trigger_set_drvdata(trig, tz->indio_dev);
+	ret = iio_trigger_register(trig);
+	if (ret) {
+		dev_err(&tz->device, "Trigger Allocate Failed\n");
+		return ret;
+	}
+	*iio_trig = trig;
+
+	return 0;
+}
+
+static const struct iio_info thermal_iio_info = {
+	.read_raw		= thermal_iio_read_raw,
+	.read_event_value	= thermal_iio_read_event,
+	.write_event_value	= thermal_iio_write_event,
+	.write_event_config	= thermal_iio_write_event_config,
+	.read_event_config	= thermal_iio_read_event_config,
+	.validate_trigger	= thermal_iio_validate_trigger,
+	.driver_module		= THIS_MODULE,
+};
+
+int thermal_iio_sensor_register(struct thermal_zone_device *tz)
+{
+	struct thermal_iio_data *iio_data;
+	int ret;
+
+	tz->indio_dev = devm_iio_device_alloc(&tz->device, sizeof(*iio_data));
+	if (!tz->indio_dev)
+		return -ENOMEM;
+
+	iio_data = iio_priv(tz->indio_dev);
+	iio_data->tz = tz;
+	mutex_init(&iio_data->mutex);
+
+	tz->indio_dev->dev.parent = &tz->device;
+	if (tz->ops->set_threshold_temp)
+		tz->indio_dev->channels = thermal_iio_channels_with_events;
+	else
+		tz->indio_dev->channels = thermal_iio_channels;
+	tz->indio_dev->num_channels = ARRAY_SIZE(thermal_iio_channels);
+	tz->indio_dev->name = tz->type;
+	tz->indio_dev->info = &thermal_iio_info;
+	tz->indio_dev->modes = INDIO_DIRECT_MODE;
+
+	if (tz->ops->check_notification_support &&
+	    tz->ops->check_notification_support(tz)) {
+		ret = thermal_iio_setup_trig(&iio_data->interrupt_trig, tz,
+					     "%s-dev%d");
+		if (ret)
+			return ret;
+
+		tz->indio_dev->trig = iio_trigger_get(iio_data->interrupt_trig);
+	}
+	ret = iio_triggered_buffer_setup(tz->indio_dev,
+					 &iio_pollfunc_store_time,
+					 thermal_trigger_handler, NULL);
+	if (ret) {
+		dev_err(&tz->device, "failed to init trigger buffer\n");
+		goto err_unreg_int_trig;
+	}
+	ret = iio_device_register(tz->indio_dev);
+	if (ret < 0) {
+		dev_err(&tz->device, "unable to register iio device\n");
+		goto err_cleanup_trig;
+	}
+
+	return 0;
+
+err_cleanup_trig:
+	iio_triggered_buffer_cleanup(tz->indio_dev);
+err_unreg_int_trig:
+	if (iio_data->interrupt_trig)
+		iio_trigger_unregister(iio_data->interrupt_trig);
+
+	return ret;
+}
+
+int thermal_iio_sensor_unregister(struct thermal_zone_device *tz)
+{
+	struct thermal_iio_data *iio_data = iio_priv(tz->indio_dev);
+
+	iio_device_unregister(tz->indio_dev);
+	iio_triggered_buffer_cleanup(tz->indio_dev);
+	if (iio_data->interrupt_trig)
+		iio_trigger_unregister(iio_data->interrupt_trig);
+
+	return 0;
+}
+
+int thermal_iio_sensor_notify(struct thermal_zone_device *tz,
+			      enum thermal_device_event_type event)
+{
+	struct thermal_iio_data *iio_data = iio_priv(tz->indio_dev);
+
+	mutex_lock(&iio_data->mutex);
+	if (iio_data->ev_enable_state &&
+	    event == THERMAL_DEVICE_EVENT_THRESHOLD)
+		iio_push_event(tz->indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_TEMP, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_EITHER),
+			       iio_get_time_ns());
+	if (iio_data->enable_trigger)
+		iio_trigger_poll(tz->indio_dev->trig);
+	mutex_unlock(&iio_data->mutex);
+
+	return 0;
+}
diff --git a/drivers/thermal/thermal_iio.h b/drivers/thermal/thermal_iio.h
new file mode 100644
index 0000000..850ea7d
--- /dev/null
+++ b/drivers/thermal/thermal_iio.h
@@ -0,0 +1,45 @@
+/*
+ * thermal iio interface driver interface file
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __THERMAL_IIO_H__
+#define __THERMAL_IIO_H__
+
+#if defined(CONFIG_THERMAL_IIO)
+
+int thermal_iio_sensor_register(struct thermal_zone_device *tz);
+int thermal_iio_sensor_unregister(struct thermal_zone_device *tz);
+int thermal_iio_sensor_notify(struct thermal_zone_device *tz,
+			      enum thermal_device_event_type event);
+
+#else
+
+static int thermal_iio_sensor_register(struct thermal_zone_device *tz)
+{
+	return 0;
+}
+
+static int thermal_iio_sensor_unregister(struct thermal_zone_device *tz)
+{
+	return 0;
+}
+
+static int thermal_iio_sensor_notify(struct thermal_zone_device *tz,
+				     enum thermal_device_event_type event)
+
+{
+	return 0;
+}
+
+#endif
+#endif
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index c074f6a..925d1e5 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -114,6 +114,13 @@ struct thermal_zone_device_ops {
 	int (*set_emul_temp) (struct thermal_zone_device *, int);
 	int (*get_trend) (struct thermal_zone_device *, int,
 			  enum thermal_trend *);
+	int (*get_threshold_temp)(struct thermal_zone_device *, int,
+				  int *);
+	int (*set_threshold_temp)(struct thermal_zone_device *, int,
+				  int);
+	int (*set_notification_status)(struct thermal_zone_device *,
+				       bool status);
+	bool (*check_notification_support)(struct thermal_zone_device *);
 	int (*notify) (struct thermal_zone_device *, int,
 		       enum thermal_trip_type);
 };
@@ -148,6 +155,8 @@ struct thermal_attr {
 	char name[THERMAL_NAME_LENGTH];
 };
 
+struct iio_dev;
+
 /**
  * struct thermal_zone_device - structure for a thermal zone
  * @id:		unique id number for each thermal zone
@@ -182,6 +191,7 @@ struct thermal_attr {
  * @lock:	lock to protect thermal_instances list
  * @node:	node in thermal_tz_list (in thermal_core.c)
  * @poll_queue:	delayed work for polling
+ * @indio_dev:	pointer to instance of an IIO dev for this zone
  */
 struct thermal_zone_device {
 	int id;
@@ -208,6 +218,9 @@ struct thermal_zone_device {
 	struct mutex lock;
 	struct list_head node;
 	struct delayed_work poll_queue;
+#if defined(CONFIG_THERMAL_IIO)
+	struct iio_dev *indio_dev;
+#endif
 };
 
 /**
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux