Support for MS5637 temperature & pressure sensor
Signed-off-by: Ludovic Tancerel <ludovic.tancerel@xxxxxxxxxxxxxxxxx>
---
drivers/iio/pressure/Kconfig | 15 +++-
drivers/iio/pressure/Makefile | 1 +
drivers/iio/pressure/ms5637.c | 187 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 201 insertions(+), 2 deletions(-)
create mode 100644 drivers/iio/pressure/ms5637.c
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index fa62950..8142cfe 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -53,9 +53,9 @@ config MPL3115
will be called mpl3115.
config MS5611
- tristate "Measurement Specialities MS5611 pressure sensor driver"
+ tristate "Measurement Specialties MS5611 pressure sensor driver"
help
- Say Y here to build support for the Measurement Specialities
+ Say Y here to build support for the Measurement Specialties
MS5611 pressure and temperature sensor.
To compile this driver as a module, choose M here: the module will
@@ -79,6 +79,17 @@ config MS5611_SPI
To compile this driver as a module, choose M here: the module will
be called ms5611_spi.
+config MS5637
+ tristate "Measurement Specialties MS5637 pressure & temperature sensor"
+ depends on I2C
+ select IIO_MS_SENSORS_I2C
+ help
+ If you say yes here you get support for the Measurement Specialties
+ MS5637 pressure and temperature sensor.
+
+ This driver can also be built as a module. If so, the module will
+ be called ms5637.
+
config IIO_ST_PRESS
tristate "STMicroelectronics pressure sensor Driver"
depends on (I2C || SPI_MASTER) && SYSFS
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index a4f98f8..46571c96 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MPL3115) += mpl3115.o
obj-$(CONFIG_MS5611) += ms5611_core.o
obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o
obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o
+obj-$(CONFIG_MS5637) += ms5637.o
obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
st_pressure-y := st_pressure_core.o
st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
new file mode 100644
index 0000000..0dbbd4e
--- /dev/null
+++ b/drivers/iio/pressure/ms5637.c
@@ -0,0 +1,187 @@
+/*
+ * ms5637.c - Support for Measurement-Specialties ms5637
+ * pressure & temperature sensor
+ *
+ * Copyright (c) 2015 Measurement-Specialties
+ *
+ * Licensed under the GPL-2.
+ *
+ * (7-bit I2C slave address 0x76)
+ *
+ * Datasheet:
+ * http://www.meas-spec.com/downloads/MS5637-02BA03.pdf
+ *
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/mutex.h>
+
+#include "../common/ms_sensors/ms_sensors_i2c.h"
+
+static const int ms5637_samp_freq[6] = { 960, 480, 240, 120, 60, 30 };
+/* String copy of the above const for readability purpose */
+static const char ms5637_show_samp_freq[] = "960 480 240 120 60 30";
+
+static int ms5637_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *channel, int *val,
+ int *val2, long mask)
+{
+ int ret;
+ int temperature;
+ unsigned int pressure;
+ struct ms_tp_dev *dev_data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = ms_sensors_read_temp_and_pressure(dev_data,
+ &temperature,
+ &pressure);
+ if (ret)
+ return ret;
+
+ switch (channel->type) {
+ case IIO_TEMP: /* in milli °C */
+ *val = temperature;
+
+ return IIO_VAL_INT;
+ case IIO_PRESSURE: /* in kPa */
+ *val = pressure / 1000;
+ *val2 = (pressure % 1000) * 1000;
+
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = ms5637_samp_freq[dev_data->res_index];
+
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ms5637_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct ms_tp_dev *dev_data = iio_priv(indio_dev);
+ int i;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ i = ARRAY_SIZE(ms5637_samp_freq);
+ while (i-- > 0)
+ if (val == ms5637_samp_freq[i])
+ break;
+ if (i < 0)
+ return -EINVAL;
+ dev_data->res_index = i;
+
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_chan_spec ms5637_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ },
+ {
+ .type = IIO_PRESSURE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ }
+};
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(ms5637_show_samp_freq);
+
+static struct attribute *ms5637_attributes[] = {
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ms5637_attribute_group = {
+ .attrs = ms5637_attributes,
+};
+
+static const struct iio_info ms5637_info = {
+ .read_raw = ms5637_read_raw,
+ .write_raw = ms5637_write_raw,
+ .attrs = &ms5637_attribute_group,
+ .driver_module = THIS_MODULE,
+};
+
+static int ms5637_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ms_tp_dev *dev_data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA |
+ I2C_FUNC_SMBUS_WRITE_BYTE |
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ dev_err(&client->dev,
+ "Adapter does not support some i2c transaction\n");
+ return -ENODEV;
+ }
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ dev_data = iio_priv(indio_dev);
+ dev_data->client = client;
+ dev_data->res_index = 5;
+ mutex_init(&dev_data->lock);
+
+ indio_dev->info = &ms5637_info;
+ indio_dev->name = id->name;
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ms5637_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ms5637_channels);
+
+ i2c_set_clientdata(client, indio_dev);
+
+ ret = ms_sensors_i2c_reset(client, 0x1E, 3000);
+ if (ret)
+ return ret;
+
+ ret = ms_sensors_tp_read_prom(dev_data);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id ms5637_id[] = {
+ {"ms5637", 0},
+ {}
+};
+
+static struct i2c_driver ms5637_driver = {
+ .probe = ms5637_probe,
+ .id_table = ms5637_id,
+ .driver = {
+ .name = "ms5637"
+ },
+};
+
+module_i2c_driver(ms5637_driver);
+
+MODULE_DESCRIPTION("Measurement-Specialties ms5637 temperature & pressure driver");
+MODULE_AUTHOR("William Markezana <william.markezana@xxxxxxxxxxxxx>");
+MODULE_AUTHOR("Ludovic Tancerel <ludovic.tancerel@xxxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
--
2.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
